travel trailer tire changing jack

The Savvy Campers

How To Jack Up a Travel Trailer or 5th Wheel to Change a Tire

There is only one situation more annoying and frustrating than realizing you have a flat tire on your travel trailer, and that is realizing you have a flat tire on your travel trailer and not knowing how to change it. Travel trailers, which are commonly towed along on long road trips around the country, are highly susceptible to picking up loose nails, screws, and other debris along the roadway.

Therefore, if you are the owner of a travel trailer you should make sure you are familiar with the process necessary to change one of your vehicle’s tires. Below this process is explored and discussed in detail. Along the way, the equipment needed to change a flat tire on a travel trailer and the differences between changing out a flat tire on a single axle and dual axle travel trailer are explored and discussed as well.

How to jack up a travel trailer to change a tire?

To jack up a travel trailer to change a tire, you will need a bottle jack, ramp if dual axle, or other automotive jack. Start by chocking the wheel on the opposite side, sliding the jack under the frame near the tire to be changed, and jack it up. This will allow you to remove the tire to replace.

Whether you just bought your travel trailer and are looking to get familiar with the process of performing routine maintenance on it, or you are looking to brush up on your roadside maintenance skills to prepare yourself for the dreaded chance you get a flat tire of your own, you should continue reading below!

Equipment Needed to Jack up a Travel Trailer or 5th wheel

The various pieces of equipment necessary to change a tire on a travel trailer may seem obvious. And, in a lot of ways they are. However, to make sure every travel trailer owner is on the same page it is pertinent we discuss those pieces of equipment before moving forward.

When you go to change a flat tire on your travel trailer you will need the following items:

• a spare tire and wheel assembly,
• a tire iron/ lug wrench,
• wheel chocks
• jack and jack stand or trailer ramp .

The latter two pieces of equipment are interchangeable depending upon which type of travel trailer you are attempting to change a flat tire on. If you are looking to change out a flat tire on a single axle travel trailer then the standard jack and jack stand will work just fine.

However, if you own a dual or tandem axle travel trailer you will want to purchase a trailer ramp or trailer aid to assist you during the tire replacement. This trailer ramp or aid will not only make the process of changing a tire on a dual-axle travel trailer simpler, but it will also keep you safer in the process.

Always test out changing a tire at home prior to having one on the side of the road. Take all of the tools needed and place in your tool kit. This will keep you from being stranded.

Changing a Flat Tire on a Single Axle Travel Trailer

The first thing you will want to do if you are attempting to change a flat tire on your single axle trailer, especially if you are pulled off on the side of the road, is move your travel trailer to a safe place. Since travel trailers are normally larger than a standard car or truck, safely changing a flat tire on one often requires more space.

The surface you decide to park your travel trailer on when changing the flat tire should be as flat as possible. Large shoulders on the side of the road or empty parking lots typically work great. Next, you will want to pull out your vehicle jack, jack stand, wheel blocks, tire iron, and spare tire and wheel assembly.

After you have these materials laid out in front of you, you will want to take your wheel blocks and place them behind every wheel on your towing vehicle and travel trailer (except for the flat tire). At this point, you should also make sure your towing vehicle is in park and the parking brake is engaged.

After safely securing your vehicle with wheel chocks, you will want to use your lug wrench to loosen but not remove the lug nuts on the wheel of the flat tire. Next, after each lug nut is loosened, you will want to place your vehicle jack under the travel trailer frame. The proper place to position your jack relative to your travel trailer should be listed in the trailer’s operation manual. Placing the jack in the wrong position could lead to damage to the trailer or harm to yourself. Never jack up your travel trailer’s axle tube as you can cause permanent damage.

Make sure to watch your brake lines as to not place the jack under to crunch any working parts of your unit. Once the jack is in the proper position you can raise your travel trailer until the flat tire is off of the ground.

Once your flat tire is off the ground, you will need to fully remove it and replace it with the spare tire and then align the spare tire upon the wheel studs. Put the lug nuts on the tire and tighten with your lug nut wrench. Do not fully tighten the lug nuts on the spare tire yet. Next, lower your travel trailer using the vehicle jack. Once your travel trailer is back on the ground, you can tighten the spare tire. It is helpful to have a torque wrench and tighten to factory specs.

At this point, all you need to do is remove the wheel blocks from around your vehicle and proceed on your route.

STEPS TO CHANGE A FLAT TIRE ON A SINGLE AXLE TRAVEL TRAILER

• Move trailer to safe location
• Gather spare tire and other equipment needed
• Place wheel blocks on all tires (except for flat tire)
• Loosen lug nuts on flat tire
• Position jack under trailer and lift trailer
• Interchange flat tire with spare tire
• Lower trailer using jack
• Tighten and torque lug nuts on the spare tire

How to Change a Flat Tire on a Tandem Axle Travel Trailer or Fifth Wheel

The process for changing a flat tire on a double axle travel trailer is very similar to the process for changing a tire on a single axle trailer. However, instead of using a jack and jack stand, you will want to use a trailer ramp or trailer aid . When using a trailer ramp or trailer aid to replace a flat tire on the rear of your trailer, you will want to place the ramp in front of the good tire that is on the rear of your trailer. If the flat tire is on the front of your trailer, you will want to place the trailer aid in the rear of your good tire. Once the trailer aid is in position, loosen but not remove your lug nuts and you can pull or back your travel trailer onto the ramp. This will lift the flat tire off of the ground.

Once the flat tire is off of the ground, you should place wheel blocks under all of the tires that remain on the ground. Next, you can begin to remove the flat tire by removing the tire’s lug nuts. After loosening the lug nuts, you can remove the flat tire and replace it with the spare tire.

Once the spare tire is mounted on your trailer you should hand-tighten the lug nuts. After tightening the lug nuts, you can remove the wheel blocks from under the tires, and back or pull your trailer off of the trailer aid. Once your trailer is off of the trailer aid, you can then finish tightening the spare tire to the manufacturer’s torque specs with a torque wrench .

This process will be the same whether you have leaf springs or a torsion axle.

STEPS TO CHANGE A FLAT TIRE ON A DOUBLE AXLE TRAVEL TRAILER

• Move trailer to a safe location and loosen lug nuts
• Position trailer aid and pull or back trailer on-ramp
• Place wheel blocks under tires
• Remove lug nuts on flat tire
• Hand-tighten lug nuts on spare tire
• Remove wheel blocks and remove trailer from ramp
• Finish tightening lug nuts on the spare tire

Things To Keep in Mind while Changing a Trailer Tire:

Never jack up your trailer with your trailer jacks or leveling jack. This can cause permanent damage to your frame.

Always make sure a wheel chock is in place blocking your trailer from moving.

Never lift from the rv bumper as they are not meant to hold any weight

Can you jack up a travel trailer?

You can jack up a travel trailer to perform maintenance or change a tire. A jack will need to be placed under your frame. Always use jack stands for extra security while working under your travel trailer.

Do you place the jack before or after slides on a travel trailer?

Always place your jack where your travel trailer manual says to place it. This will be near the tires in the middle of the frame. This could be before or after the slide depending on your model.

Where to place the jack on my travel trailer?

Place the jack in your manufacturer’s recommend area, this will typically be on the frame of your travel trailer. If you have a dual axle trailer, place the jack closest to your flat tire either in front or behind.

Safety First! While Changing an RV Tire

Changing out a spare tire on your travel trailer can be frustrating and stressful. However, if you are prepared and familiar with the process you should be able to easily change out a flat tire for a spare. Remember, you should always move your travel trailer to a safe location before beginning to perform any type of maintenance on the vehicle. If you are working with a dual or tandem axle travel trailer make sure you also take the proper safety precautions and utilize a trailer aid.

Be the first to be notified about FREE tips, hints, coupon codes, and email-exclusive information. All for FREE!

Related Posts:

Similar Posts

How to Store Your RV at Home: The Complete Guide

One question you should ask yourself prior to purchasing a travel trailer, camper, or RV, is where you will store it. Many of us forget that question and have to figure it out after the fact. Here are the facts to consider when storing your RV at home or at a storage unit. Should you…

9 Dumb Travel Trailer Mistakes We Made (and how to solve them)

It takes a lot of work to plan a trip, pack, tow, and get settled in a campsite; as we know in life not everything goes as planned. We did not grow up with travel trailers, or by doing that much camping. We have had to learn the hard way by doing as much online…

Should You Use A RV Surge Protector When Plugged Into A House?

The opportunity to plug your RV into a household electrical system is ideal for keeping the RV battery bank charged and topped up, and also to enable the use of lights and low draw electrical appliances. RVs are fitted with 30 Amp or 50 Amp systems and require a special adapter to connect to normal…

Best Expandable Travel Trailers Under 3,500 lbs

Expandable travel trailers are the perfect hybrid between a traditional travel trailer and a pop-up trailer. The expandable trailer offers the right balance between needing a travel trailer but still wanting the feel of outdoor camping. Most expandable sides convert to a bed that is open to the rest of the trailer and the walls…

Are Travel Trailer Keys Universal? and How you Can Stay Secure

You have just purchased your own travel trailer and are ready to hit the road. As you prepare though, you may be a little bit worried about what will happen if you misplace your key when you are gone. You may worry about whether you need to get a second key and what kind you…

How Long will a Black Water Tank last in a RV?

When we go camping, there is always the question of will we need to move the RV to dump tanks in the middle of our trip, or how long can we go without dumping. This post should give you a clear idea of how often and when you will need to dump. How long will…

Join our Newsletter to stay up to date on the latest RV topics and receive our FREE RV Inspection Cheat Sheet Today. Use this tool to inspect new or used campers you are looking at purchasing.

No thanks, I’m not interested!

How To Jack Up A Travel Trailer To Change A Tire

Sharing is caring!

No matter how many ways you attempt to avoid a flat tire, eventually, you will end up with one. Knowing how to jack up a travel trailer and safely change the flat can keep you traveling with minimal interruptions.

However, many travel trailer owners are not prepared to fix a flat on their trailer. In this article we will take a look at the ins and outs of how to jack up a travel trailer, making the task of changing a tire hassle-free.

Do Travel Trailers Have Spare Tires?

One of the first things you need to know before you have a flat tire is if your travel trailer has a spare tire. It does no good to know how to jack up your travel trailer if you do not have a spare tire.

When you are shopping for a travel trailer, you need to be aware that not all travel trailers come with a spare tire as a standard feature. This can be a surprise for many new owners, and sometimes a very inconvenient realization.

When shopping for a new travel trailer, make sure that you check for a spare tire on the model that you want. If there is not one, ensure you have one added before you drive off the lot.

If you already own your travel trailer, or if you are purchasing a used travel trailer, you may need to purchase a spare tire. Make sure that you purchase one that matches the tires and wheels on your travel trailer. This ensures a seamless transition to your spare tire.

Another bit of helpful information about spare tires – make sure that they are properly inflated. There is nothing more disappointing than successfully changing your tire only to find out your spare tire is flat as well.

We find that most camper trailer owners forget to inflate the spare tire when they inflate their active tires which leaves them with a flat or low spare when they need it most!

Do Travel Trailers Come With Jacks?

Jacks for travel trailers are one of those must-have accessories that owners need to purchase on their own. You will rarely find a travel trailer that comes with jacks, even if it has a spare tire.

If you are shopping for a jack for your travel trailer, you will need to carefully research the proper size for your trailer. Jacks are rated based on the amount of weight they can lift.

You will need to know the GVWR of your travel trailer when considering a proper jack. The GVWR includes the weight of the trailer plus the weight of your gear.

The other feature of a jack that you need to consider when selecting one for your travel trailer is the height. Look for a jack that extends high enough to lift your travel trailer. This may mean that you will need to use lifting blocks, particularly if you have a larger travel trailer.

It is usually not a good idea to try and use the jack that comes with your tow vehicle. It may work in a pinch, but typically, these jacks are not made to hold up a travel trailer. They may have enough weight capacity, but they may not be sturdy enough for your travel trailer.

Can You Change A Tire On A Camper Trailer Yourself?

One of the most important things you can do as a travel trailer owner is to know how to do basic and important maintenance and repair tasks. One of the first things you should do as a travel trailer owner is learn how to change the tires on your trailer.

You should never learn how to do this task on the road. Learning how to change a tire on your camper before you hit the road is safe and low-pressure. Take time to practice at home. This will allow you to work out the kinks so that when you are on the side of the road you are prepared.

If this is something that you have never done before, ask for help. A skilled mechanic or the repair staff at your local RV dealership can help you learn how to change a tire.

Improperly changing the tires on your travel trailer can be very dangerous. Even if you are in a challenging location, you need to work carefully and ensure that you are taking the time to do the process correctly.

Rushing through changing a flat tire can be dangerous and result in an accident, or damage to your camper or tow vehicle.

What Tools D o You Need To Jack Up A Travel Trailer ?

If you are new to jacking up your travel trailer to change a tire, it is helpful to know the basic steps before you practice. Jacking up your travel trailer is not a difficult task if done properly. Before you start traveling, you should be familiar with the steps below, and make sure you have the right tools.

• Spare tire – Make sure that your spare tire is the right size and is properly inflated before traveling.
• Trailer jack – Properly sized for your travel trailer. A jack that is a bit larger than necessary is better than a jack that is too small.
• Jack blocks – these are helpful if you are on a slope or need to have a little extra lift.
• Lug wrench – Before traveling, confirm that the lug wrench you have fits the lugs on your travel trailer wheels.
• Torque Wrench – Find the manufacturer’s torque spec. Torque each nut following the star tightening pattern.
• Wheel chocks – You should have wheel chocks as part of your normal safety equipment.
• Reflective triangles or cones – These are particularly helpful if you have to pull off the side of the road. These will tell other drivers to slow down and use caution when passing your travel trailer. In some states, not using these sorts of safety equipment can land you a traffic ticket.
• Gloves – Gloves will give you extra grip. This is helpful if it is raining or cold outside. They also keep you from getting road grime all over your hands.
• Flashlight – It never fails that a flat tire happens at night. A flashlight will allow you to see what you are doing so you do not have to struggle with a relatively simple task.

Now that you have the proper tools, you can easily jack up your travel trailer and change a flat tire. Here are the steps that you will take to properly jack up your travel trailer when changing a tire.

How To Properly Jack A Travel Trailer To Change A Tire

This is the normal process for jacking up a travel trailer to change a tire. This process works great for both single and double-axle trailers.

For those with double-axle trailers, there is a cool new product, called an EZ Jack , that allows you to jack up your travel trailer without the jack. These are good alternatives, just make sure that you know how to do the full process, just in case you are in a spot where you cannot use the EZ Jack.

• Get off the road – Pull off the side of the road, as far off the shoulder as possible. If possible, make sure that your stopping point is flat and smooth. 
• Hazard Lights – Turn on your hazard or 4-way flashers before you exit your tow vehicle. This will alert other drivers that you are having trouble.
• Make yourself visible – Set a safe work zone using cones or reflective triangles. Many travel trailer owners do not carry cones or triangles. These are essential in our opinion. Having four or five cones or triangles allows you to set a long, safety zone and allow drivers to slow down and avoid you.
• Secure your trailer – Use wheel chocks on the opposite side of the trailer. Some people will tell you to do this after you break the lug nuts. Do this before you start. It will help you avoid “forgetting” these important safety tools.
• Break the lug nuts loose – You will want to do this before you jack up the trailer. The ground will hold the wheel in place. If you are having a difficult time breaking the lug nut loose, a helpful hint is to carefully jump on the lug wrench handle.
• Set the jack – Place the jack on a flat surface and the jack below the frame of the trailer. You may need to use jack blocks if the ground is uneven or if you have to work on a slope.
• Begin jacking – Carefully begin working the jack so that it connects with the frame of the travel trailer. Continue raising the jack until the tire is just slightly elevated off the ground.
• Remove lug nuts – You should be able to do this process with just your hands. However, the lug wrench may make the process faster. Set the lug nuts in a safe yet convenient location. You don’t want to lose them but putting them far out of the way is not helpful.
• Remove the flat/damaged tire – Carefully slide the wheel off the lugs away from the axle. Set the flat tire away from your working area.
• Install the spare tire – Carefully slide the wheel over the lugs. You may need to increase the height of the jack if you did not raise the trailer enough for the inflated spare tire.
• Replace the lug nuts – Tighten each one until they are snugged up against the wheel. Tighten in a star pattern.
• Lower the jack – Slowly release the jack returning the tires to the ground.
• Torque the wheels – Using your torque wrench tighten the lug nuts to the proper torque value.
• Clean up – Pack up all your tools and remove the jack and chock blocks from under the trailer. The last things you should return to your travel trailer or tow vehicle are the cones or reflective triangles.
• Hit the road – Turn off your hazard lights, and pull back onto the road, watching for other drivers.
• Double-check – At your first stop double-check the wheel and tire to make sure everything is as it should be.

Do You Need To Torque Travel Trailer Wheels?

When you are changing a tire, whether, on your travel trailer or your tow vehicle, you will want to torque the lug nuts. Torquing the lugs will ensure that the nuts are tightened appropriately.

The torque value will depend on the type of wheels that are on your travel trailer. Steel and alloy wheels, which are the most common on travel trailers will have different torque values.

Over-torquing lug nuts may seem like an OK idea. However, you can damage the wheels by over-torquing. This also makes it more difficult to remove the lug nuts the next time you need to change a tire.

Under torquing can cause the wheel to loosen while traveling. This can create a dangerous condition that may cause an accident or damage the travel trailer or your tow vehicle.

A good routine to add to your pre-travel maintenance is to check the torque of all the lug nuts on the wheels of your travel trailer. Properly torqued wheels can also reduce the likelihood of uneven wear on the tires.

Why Do Camper Trailers Have Tire Blowouts So Often?

So, you might be wondering why it is so important to know how to jack up your travel trailer and change a tire. Well, campers and travel trailers tend to have blowouts more often than tow vehicles or motorhomes.

Some of the reasons for this higher incidence of flats and blowouts have to do with the tires. Others are related to how you care for your travel trailer.

To avoid blowouts here are some hints for caring for your travel trailer tires:

• Make sure you equip your travel trailer with good-quality tires. With tires, you get what you pay for. Cheap tires will not handle the side wall stress as well as better quality tires.
• Know the proper inflation value for your tires. Do not over or under-inflate tires. This also leads to wear issues and reduces the life of the tire.
• Replace your tires when they start showing signs of wear. Old tires are more likely to be dry, brittle, and weak. This increases the risk of blowouts.
• Finally, traveling at a reduced speed will greatly decrease your risk of a blowout. Even just a few miles per hour below the speed limit will be easier on your tires than if you exceed the speed limit.

Final Thoughts About Jacking Up A Travel Trailer

Knowing how to jack up a travel trailer is an essential skill for any owner of a travel trailer. When you are on the road and have the unfortunate luck of a flat tire, knowing what to do will save you time and money. 

While the task may seem daunting at first, with a bit of practice, jacking up your travel trailer and changing a tire becomes a quick and easy task.

Being stranded on the side of the road as your long weekend passes by is no fun. Neither is paying for an emergency roadside repair. That being said, having a roadside assistance membership can eliminate the on-the-spot cost and the work of changing a tire.

Your options for help may be limited so having the skills to do it yourself is important. Just as important is knowing when to call for help. If your trailer is on uneven ground or you are in a high-traffic area and will be at risk changing a tire, call the pros.

Just like running out of propane or forgetting a wheelchock, flat tires on travel trailers are going to happen. When you’re prepared, the process can be quick and painless and you’ll be back on the road in no time.

Related Reading:

– Do RVs Have Spare Tires? – How Often Should Travel Trailer Tires Be Replaced? – Can You Use Truck Tires On A Travel Trailer? – 10 Best RV Tire Pressure Monitoring Systems

About the Author:

Jason Gass is a full-time freelance writer and part-time RVer whose goal is to share great stories around a campfire with good friends.

When he’s not working, he spends most of his time camping, searching for the best breweries, and road-tripping in his teardrop trailer with his wife, daughter, and two dogs.

Recent Posts

What Gear Comes with A New Travel Trailer?

8 Best Travel Trailers For Full-Time Living

The Best Jack For Changing Trailer Tires (Ultimate Guide)

Written by: Micheal Caine

May 9, 2023

Affiliate Disclosure: When you buy a product via our links, we sometimes earn a referral fee.  Learn more

What if your trailer tire suddenly requires maintenance. Do you know what jack to be acquired?

Our Recommended Jack For you…

 A right jack at the right time will help you change trailer tires without causing problems.

To get the right jack, we are here with this handy buying guide that will surely make you understand to select which type, size, safe and affordable jack for changing trailer tires .

Before purchasing or selecting the jack, carefully go through the guide to get more about the jack. They are not just for trailer tires. Jacks opt for all types of vehicles. Each type of vehicle requires its specific jacks to get the job done.

Let’s get started!

Table of Contents

REESE Towpower 74410 Trailer Jack

Key Features

• Load capacity : ‎1000 Pounds
• Material : Alloy Steel
• Weight : ‎14 Pounds
• Jack type : Trailer
• Height Extension : 3 inches to 5 inches 

“ Amazon ” “ Ebay ”

REESE Trailer Jack is one of the affordable and lightweight trailer jack for changing tires. The great thing about this Jacks is it fits to tongues 3” to 5” and as well helps easily raise and lower trailers with a capacity up to 1,000 lbs.

This 6-Inch Wheel jack to change trailer tires and have the ability to lift easily 1,000 pound capacity and change the tire.

This trailer jack is the standard normal class which is the best of the boat trailer jack for changing tires.

REESE is the Bigger jacks which have something else going for them, stability. It tends to have a considerable base and make them much more stable and less tippy as compared with others.

This may cause an issue while out on the road, for this it is better you often only have the side of the road to work with on that time almost never flat tire and make it able to change tire.

For safety, not just for this jack, it is better for every jack to use some wood blocking under the frame or on axle (use on both tandem axle and single axle) adjustable car stands under the frame.

Verified Compatibility

• U-haul trailers
• All little such as 5’x7’,4×8 trailer
• 6×10 trailer/enclosed ramp trailer
• 6×12 utility trailer
• 5×8 utility trailer/enclosed trailer.
• 22 ft trailer
• jet ski trailer.
• 16 foot boat trailer
• Small lawn mower trailer
• As well Empty and Loaded Trailer

Note: The bolts were long so this should work for many sizes of trailers.

• Easy to install/assemble
• good heavy duty unit for smaller trailers
• Solid and good upgrade
• inexpensive
• Medium duty materials

No products found.

Lippert 285318 3500LB Power Tongue Jack Black

• Load capacity : ‎3,500 Pounds
• Weight : ‎10 Pounds
• Powered : Electric
• Height Extension : 28-3/4″ Extended 

“ Amazon ” “ HomeDepot ”

If you want a quick response jack which help you to quick change tire the Lippert Tongue Jack Black is the one of the best choices for you which comes with all necessary hardware and pin which make it installation very fast and easy which means lowering and raising require no time.

It Made from heavy-gauge steel construction and a strong body. This durable electric trailer jack can easily lift weight around 3500 Pounds on that weight

This makes it one of the best option to use for class c motor-home and as well you can carry anywhere in your motor-home not require cranking manual jack just push a button, you can easily raise or lower your a-frame trailer in a fraction of the time.

This electric jack is easier to use to get your 5th wheel RV or travel trailer up and enable it for running at the campsite.

In less than 5 minute this can give you efficient levels which delivers ground control with a lot of accuracy which may not be provided by other brands.

This product is extremely lightweight and compact as compare it with other brands jack, its weight just is the 10 lb it not just perfectly work with utility trailer as well almost numerous type of vehicle can use it to change tires.

• Super easy install/assemble
• Good quality
• No hardware or manual crank Includes

Pro-Lift F-767 Grey Low Profile Floor Jack

• Load capacity : ‎2 tons
• Weight : ‎30 Pounds
• Jack type : Hydraulic floor jack
• Height Extension : 3-3/8 inches to 15 inches.

To get the better and long lasting durability this jack is the favorite choice of many vehicle owners because the Floor jack comes with heavy-duty steel construction.

The weight of this product is just 30-lbs regardless of terrain surfaces. This product offers an amazing balance system.

This is just because of the wider and long base which allows it for much more stability while releasing and lifting.

Range starts from 3.5 to 15 inches which is amazing and that makes it a versatile lifter which easily uses a variety of machines and it efficiently works with many different vehicles.

Pro-lift is Patented bypass device that works to protect against over-pumping for safe and easy operations as well Built-in safety valve works against overloading protection.

If not preferring bottle jack pro-lift offer Floor Jack this has ability to lift the camper or trailer easily and its Load Capacity is 2 tons.

Pro-lift is a Chinese made jack the quality you may compromise on different angles. So, in fact you are getting this product at a lower price with a floor jack for under 100 dollars.

• work smoothly
• Perfect low profile jack
• lifting plate small

BIG RED TA92006 Torin Pneumatic Air Hydraulic Bottle Jack

• Load capacity : 5, 12, & 20 tons
• Weight : ‎32 Pounds
• Jack type : Bus Bottle Jack
• Height Extension : 10-7/16″ to 20-1/16″

Are you looking for the best bottle jack for travel trailers? Big red is a heavy duty bottle jack which is an ideal for heavy machinery such as trailer lifting to change tires, farm vehicles and more.

Big red is specially designed which you can operate two ways either pneumatically (which require air pressure and the minimum of 110 PSI air pressure is required to raise capacity load) and also work manually, which enable it to lift a full size truck, SUV, or even mid size of truck and you easily change the tire and as well repair from chassis.

This comes with 3 different versions you select according to your need as well for its maximum load capacity 20 ton (40,000 lb) and as well features a lifting range between 10-7/16″ to 20-1/16”.

If the height of your trailer higher you can also be use leveling block underneath the jack to achieve that height and lift easily, basically the height is not much higher of a trailer but some time it happen otherwise but for rv you may require because there height more as compared with trailer and it will also be a best jack for rv.

It pneumatically requires a minimum 110 PSI and 175 PSI to lift the frame and you also use that compressor which you use for inflating the tire.

This hydraulic bottle jack is also a great investment for collection of trucks. It makes replacing tires much easier and works on single and tandem axle trailers.

Big red is equipped with a strong dual spring which controls the lowering system. After changing the tire of your trailer you don’t need to push again or use a compressor to drop the fluid. Its spring can tackle everything to lower the trailer. If you want to take check these two major brand compare Husky vs Kobalt Air Compressor .

For overloading this jack comes with a fitted safety valve, which will be a safety option for you. To satisfy users, companies offer 1 year of manufacturer warranty to build confidence.

• Powerful Pump
• Air pressure down quickly
• Compressor Requires For Automatic

BIG RED T43202 Torin Steel Jack Stands

• Load capacity : 2, 3, 6 & 12 tons
• Weight : ‎18 Pounds
• Jack type : Jack Stands
• Height Extension : 8-9/16″ by 7-3/16″

Big red offers another jack system with great power use to change tires and repair from under and modify this product is a valuable choice.

Torin jack enable decent lifting bigger capacity 3 Ton (6,000 lb) that has Adjustable height ranges from 11-1/4″ to 16-3/4″ making it a valuable choice for also trucks, SUVs, vans and as well for trailer aid a wonderful choice.

It features a large saddle surface area for preferable contact with the load being supported and makes a great balance on ground.

As compared with other big red jack systems it offers quick height adjustments that lock into place by the availability of the Saw-tooth Ratchet Bar.

The use of this product is very easy and if you are a beginner by getting info on how to jack up a trailer to change a tire with this Torin Steel Jack Stands.

Its pyramids like stand give strong grip and lift the body and you not only easily change tires as well as oil changes to transmission drain and fills, valve cover gasket swaps, motor mounts, brakes, suspension, and much more purposes.

This jack stand will get you a very adorable price range you can select according to your need. It comes in the ranges from 2 tons (4,000 lb) to Ton (24,000 lb) Capacity makes every kind of vehicles lift from change tire to oil to replace this be used.

• easy to assemble
• Lightweight
• Thin of gauge metal

What size tongue jack do I need for my trailer?

There are two main factor that you should look while selecting the right tongue jack: weight and height capacity jack

Weight :: The weight capacity of tongue jack is identified by calculating the tongue weight of your trailer, to understand this the formula is very easy.The rule of thumb for a boat trailer is almost 7 to 8 percent of the weight of your fully loaded trailer.If you have a 7,000 lb loaded trailer you don’t need to go with a 7000 lb electric trailer jack, using just its 10% as an example enough that you require a tongue jack which has a capacity of almost 7,000 lb .

Height : You need to have the right height for the jack to lift to clear the problem on your vehicle lifting. For height measurement on tongue jack you need to figure out the level. Measure the height from ground to the bottom of the coupler. This measurement must be done when the trailer is on level.

BUYERS GUIDE 

Need for jack .

Before opting for a jack, you should consider what vehicle you are acquiring the jack. As you know, the world is getting revolutionized, and the ways of transportation are enhanced day by day.

So, various jacks are being manufactured for desired vehicles to get the job done.

In today’s world, each product possesses various purposes. Each has its types and special working features suited for a targeted group or materials. The same applied to the jacks. When you opt for a jack, make sure what type you need to acquire. 

Jacks are available in different types, features, weight lifting capacities, ranges, sizes, shapes, etc. 

The top categorization is in four types. These can be opted for changing trailer tires as per desired need.

They are considered the popular heavy-duty jacks with better weight lifting for heavy trailers and vehicles. When it comes to the jack, it opts for the big wheel.

They can’t be held easily because of their heavyweights. It possesses better compatibility with various vehicles when requiring a quick tire change.

• Hydraulic Bottle Type

When more than two jacks are compatible with your vehicle, go for the most durable one. The hydraulic jacks last more than a decade when kept maintained. You might observe a bottle shaped compact jack.

You are right! 

It’s the hydraulic type. 

Hydraulic bottle jacks suit large vehicles, including trailers. 

They are considered the best jack for lifted jeep. 

• Scissor Type

A scissor-type claw-shaped jack is the one opted for small vehicles and is a better alternative for hydraulic jacks. 

It’s a mechanical jack utilizing human effort to get the job done. Scissor jacks are considered ideal for less maintenance and changing flat tires. They opt less for large trailers. A scissor-type jack is best if you require a portable jack for small motors.

For lighter boats, you need to consider the sea sense trailer jack.

A scissor jack is further into two jacks

• Hydraulic Scissor jack
• Electric Scissor jack (also known to be  electric jack)
• Hi-lift Type

As we have mentioned earlier, always aim for a high lifting range, so the hi-lift fulfills the task. This type possesses a high lifting and weight range that makes it fit for large trailers. 

Remember, their long structured shape may create problems in transportation or usage.

Bottle Jack Vs Floor Jack for Trailer Tire

We have discussed the features of both jacks, and the floor jacks suit well in terms of lifting heavy vehicles like trailers. 

Bottle jacks possess narrow frames that can’t make them stable like floor jacks. Besides that, the floor jack has the highest lifting range making it fit for trailers and heavy vehicles to create much space for the personnel to maintain the RV. 

If you consider your vehicle to cause difficulty while lifting and jacking, consider the floor jack to get the job done.

• Jack Parts Specifications

Once you select the jack type, assure that the jack possesses the desired parts according to the guidelines for lifting and jacking vehicles.

These parts are present in all jacks, but their features might not be identical for each scenario. Let’s know what lies in these parts we need to consider.

A base is the bottom part on which the jack resides. A high-width and large base help the jack stand securely and increase its stability.

Opting for a jack for heavier loads will acquire a high-width base jack to get the job done without tipping over or lowering into the ground. 

A more versatile jack possesses different handles while jacking up the vehicle. A crowbar or a tire iron is a handy option. They are also required when the jack’s original handle is damaged and require replacement.

• Position Stop

The prime part is the position stop. It is considered a safety measure and will allow you to work safely and prevent exceeding height problems of the tool. At the maximum height, it will stop the jack from further exceeding. It makes it safe for lifting heavy loads.

• Size of Jack

The size of the jack is another prime factor you need to consider. How to select the ideal size jack for your vehicle? It’s simple! The size depends upon the tongue weight of the RV tires.

The tongue is approximately 10-15% of the total RV weight. According to this information, you can determine the required size of the jack.

The weight of the RV tongue goes in proportion to that of the RV. If the RV is heavier, the tongue weight will be more than 15% of its weight and vice versa. A big size usually suits best for changing large trailer tires.

• Jack Build Quality
• For Heavy Weighted Loads 

The best jack for changing trailer tires and heavy vehicles will require steel as in-built material. Solid stainless steel is the most opted and appropriate material for manufacturing jacks that lifts heavy loads. The Heavier the jack construction, the better the quality, stability, durability, and extended longevity.   

• For Light Weighted Loads

The more lightweight the jack is, the more convenient is its portability and use. They considered opting for small vehicles with less bulky structures. 

The lighter ones are less stable when opted for large vehicles.

• Weight Rating

The weight rating is the practical value of the weight your jack can lift. Every jack possesses its weight lifting capacity, which we called as weight rating. The weight rating is in tons and pounds. These units are considered the standard units for weight rating.

How does the weight rating of a jack work?

It’s simple, check the jack for the rating. A high value for weight will be required if you need to lift the trailer, motorhome, or any other specified vehicle.

So, before opting for jack, make sure that the weight rating is according to the purpose you acquire.

• Lifting Range

Lifting range is considered the capacity of your jack to lift the vehicle to its maximum height. Your jack must be able to lift so that you can easily change the trailer tire. 

The lifting range depends on the vehicle you are jacking or lifting. Whether a small car, an RV, SUV, motorhome, or boat trailer. The height provides maximum space for you to change the flat tire. 

Maximum and Minimum Lifting Ranges

What do you think of how much of a maximum and minimum lifting range will be opted for changing the trailer tire?

According to the jack type, you might experience a jack with a maximum lifting range of 30 inches, while some jack types only provide a few inches of lifting. The height depends on whether you require the jack for small vehicles or large trailers, motorhomes, etc. 

Standard Lifting Range 

The standard lifting range for a jack is considered 18 inches. 

Suggestion 

We suggest you purchase a jack that makes you versatile in case of height range. Always aims for a high height range so that you won’t be limited to only using the jack for small vehicles.

Therefore, you need an effective lifting range of the jack for the ground clearance of the trailer. It’s better to measure it before opting for the jack.

• Lifting Speed

To purchase a jack, first look for the jack’s weight rating, lifting range, and lifting speed. It will help you in selecting the right one for your vehicle. There are specific models built with dual lifting positions. 

It makes the user achieve the height in just a few strokes. A quick lifting system opted in the jacks also suits well.

Standard Lifting Speed

A standard jack requires 8 to 10 strokes of the handle to acquire the desired height per need. The speed can be enhanced by opting for a dual lifting positioned jack.

We all like stuff that lasts longer. Durability is the factor you need to consider before opting for the jack. A durable jack will be the one that has been designed with the best-inbuilt quality and suits all kinds of vehicles.

A long-lasting jack keeps you well equipped in any maintenance situation. Proper maintenance of the jack keeps its long life and effectiveness. The durability of the hydraulic jacks lasts more than a decade if kept maintained.

• Safety Guarantee

In every circumstance, safety is on a priority basis. Always ensure security features before opting for any jack type.

A safe well-equipped jack is more prime in terms of safety. Remember that accidents happen by ignoring the jack’s safety factors while lifting the vehicles or changing the tires.

Check the position stop and base width of the jack to assure safety. A safe jack should not easily come off of the trailer. Else you might experience injury. 

ASME-PASE Certification

To easily assure the safety guarantee provided by the supplier, check the ASME-PASE certification . This certificate ensures safety.

Keep in mind to select the best jack according to your desired budget. The cost of the jack in terms of its performance, quality, and durability matters a lot. It’s better to invest in the best rather than a cheap one. 

• Selecting Supplier 

Once you select the desired jack, search for the best supplier in the marketplace. The product is available in both physical and online marketplaces.

For boat trailer jack Walmart, Home Depot, Lowes, Amazon, and many others . The user must be aware of the additional cost required for that.

If you require boat trailer jack parts, boat trailer wheel jack, and 12,000 lb. trailer jack parts, the supplier should know all your criteria. The Canadian tire trailer jack is considered a good option for changing trailer tires. 

RECOMMENDED FOR YOU:

Leave a Comment Cancel reply

Save my name, email, and website in this browser for the next time I comment.

About Us     Privacy Policy     Disclaimers

In case of questions please contact us at: hi @ thefinalkit.com

COPYRIGHT 2024 © THEFINALKIT.COM | ALL RIGHTS RESERVED

AFFILIATE DISCLAIMER

Thefinalkit.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Thefinalkit.com also participates in affiliate programs with Bluehost, Clickbank, CJ, ShareASale, and other sites. Thefinalkit.com is compensated for referring traffic and business to these companies.

• Find a Location

How To Change a Tire on a Travel Trailer

Technician Tip: At a service center , technicians will use both the frame and the axles as lifting points since they are on flat, level concrete and can access all sizes of jacks. On the side of the road, you’ll likely have a small bottle jack, and there will be no guarantee of the pavement condition (or the ground on the side of the road).  

When changing a tire on the roadside, place the jack under the axle as close to the spring mount as possible.  

Then follow these steps to change a tire on a single-axle travel trailer: 

• Carefully raise the unit slightly so you know it won’t sink or tip, and place wheel chocks on both sides of the tires that remain on the ground. 
• Break the lug nuts loose on the tire to be changed. 
• Raise the trailer using the jack until daylight is visible under the tire (2-3 inches off the ground). 
• Place a jack stand under the axle next to the jack and lower the jack gently until the axle rests upon the jack stand. Verify you can still see daylight under the tire. Jacks are for lifting; jack stands are for working. The jack can be left in place if it isn’t in the way. If you don’t have a jack stand or wheel chock, you could put down your stabilizer jacks only to stabilize the unit (NOT TO LIFT) while your jack is left in place.
• Remove the lug nuts, swap out the tire, and reinstall the lug nuts finger-tight. 
• Check the tire pressure in the new tire and adjust as needed. 
• Lift the axle with the jack enough to remove the jack stand, then lower it until the tire touches the ground enough that it cannot turn. 
• Tighten the lugs in a star pattern in three stages: 20-30 foot-pounds, 50-60 foot-pounds, and then to the final torque recommended by the manufacturer, typically 90-120 foot-pounds. 
• Fully retract and remove the jack and chocks. 
• Retorque as required by the manufacturer (every 10/25/50 miles or 25/50/100 miles, etc.)

Technician Tip: If you only have one spare tire, we highly recommend proceeding directly to your nearest tire shop to get a replacement for the blown tire. Your spare should be used for emergency purposes only.  

Tire Size Description

When calling local tire shops to inquire about spare tire availability, know your rim diameter and tire size to expedite the process. You’ll need a tire matching your existing tire size, which is printed on the tire’s sidewall. It will look something like this: ST225/75R15.

Here’s what those letters and numbers mean: 

ST = Special Trailer

225 = Tire width in millimeters

75 = Height-to-width aspect ratio

R = Radial tire

15 = Rim diameter

How to Change a Tire on a Dual-Axle Travel Trailer

For dual-axle trailers, the process of removing the blown tire and installing the spare is essentially the same. The difference lies in your options for raising or jacking up the trailer to remove the blown tire. 

Using a Tire Aid is the simplest and quickest method, provided you only have a single blown tire on one side of your trailer. The Tire Aid eliminates the need for a bottle jack to lift your trailer and a jack stand to rest the axle on while changing the tire.

A Tire Aid allows you to drive the remaining good tire onto an elevated cradle so your blown tire is off the ground. Whether you back onto the tire aid or pull forward onto it depends largely on which tire is blown (i.e., pull forward onto it if the rear tire is blown; back onto it if the front tire is blown). 

You’ll still need to break the lug nuts loose for the tire you’ll change while it’s on the ground. From there, you can pull up onto the tire aid, which cradles the good tire. It’s still a good idea to place wheel chocks on both sides of one tire on the opposite side of your trailer for added safety. 

Then, follow the same procedures to swap out your blown tire for a matching spare: 

• Pull slowly off the Tire Aid until the replacement tire touches the ground enough that it cannot turn. 
• Pull completely off the Tire Aid. 
• Retorque as required by the manufacturer (i.e., 10/25/50 miles or 25/50/100 miles, etc.)

Once again, it’s smart to acquire a new tire as soon as possible so your spare can return to being what it’s designed for – an emergency option. 

Here are a few more resources to help you care for your RV’s tires: 

• How to Maintain Your RV Tires While in Storage
• Everything You Need to Know About RV and Trailer Tires
• Do You Need an RV Tire Pressure Monitoring System?

Do you have any tips or tricks for changing a tire on an RV? Share them with your fellow RVers in the comments below.

Leave Your Comment Cancel Reply

Save my name, email, and website in this browser for the next time I comment.

Shop By RV Type

Your Adventure Awaits

Copyright © 2023 cwi, llc all rights reserved.

• RV Glossary |
• Privacy Policy |
• California Privacy Rights |
• Do Not Sell or Share My Personal Information |
• Targeted Advertising Opt Out |
• Terms of Use

Home » Guides » How To Change A Tire On A Travel Trailer

How To Change A Tire On A Travel Trailer

• Last Updated: Apr 25, 2024

Chances are if you’re a traveler, you’ll eventually have to change a tire on your travel trailer. It’s not a difficult process, but there are a few things you need to know in order to do it safely and correctly.

In this blog post, we’ll walk you through the steps necessary to change a tire on your travel trailer. We’ll also discuss some of the precautions you should take to ensure your safety while performing this task. So, if you’re ever faced with changing a flat tire on your travel trailer, don’t worry – we’ve got you covered!

Materials needed: 

To change the tire, you’ll require the following basic materials

• Tire iron or lug wrench
• Lift or jack stand
• Socket wrench set
• Spare tire and rim
• Air compressor (optional) 
• Chalk or spray paint (optional)

How To Change:

1. Level Spot To Park The Trailer

The first step in changing a tire on a travel trailer is to find a level spot to park the trailer. If you have an air compressor, you can use it to inflate the spare tire now. Chalk or spray paint can also be used to mark the spot where the spare tire will go. Once the trailer is parked and the spare tire is inflated, you’ll need to remove the old tire. To do this, you’ll need to loosen the lug nuts with a wrench.

2. Loosening The Lug Nuts

Loosening the lug nuts is the second step in changing a travel trailer tire. Use a tire iron or lug wrench to accomplish this; do not entirely remove the lug nuts at this time. You can start jacking up the trailer once the lug nuts have come loose. When the flat tire is lifted off the ground, place the jack under the trailer’s frame and raise it.

3. Jack Up The Trailer

The travel trailer should be jacked up using a jack and lift or jack stand. To prevent harming the frame of your trailer, install the jack and lift or jack stand in the proper location. Replace the lug nuts and tighten them in a crisscross fashion before setting the spare tire on top of the raised frame. If you’re using an air compressor, make careful to properly fill the spare tire before you leave.

BONUS TIP:  

Some people like to use a piece of wood as a “spacer” between the jack and the frame when lifting the trailer. This prevents damage to the frame and makes it easier to get the jack in place.

4. Replacing The Lug Nuts

Replacing the lug nuts and tightening them in a crisscross pattern is an important task when maintaining your travel trailer. This helps to evenly distribute the force around the wheel, making it less likely that one lug nut will bear the brunt of the weight and become loose. In addition, tightening the lug nuts in a crisscross pattern helps to prevent damage to the wheel. 

5.   Tighten The Lug Nuts

Lower the travel trailer back down to ground level and tighten the lug nuts one more time. Be sure they are tight enough that they won’t loosen up while you are driving.

Over-tightening can cause cracks or warping, so it is important to find the right balance. With a little care and attention, you can keep your travel trailer in top condition for years to come.

6. Lower The Jack

 Be sure to lower the jack on your travel trailer and check that the wheel is secure before hitting the road. That additional step could prevent a blowout or other serious problems down the road. Do the same for all other wheels on your trailer to be safe.

Precautionary Measures:

If you’re planning on taking your RV or travel trailer out on the open road, it’s important to make sure that all of the wheels are properly secured. This can help to prevent potential accidents and damage to your vehicle. To do this, simply lower the jack and check to make sure that the wheel is secure. Repeat these steps for all other wheels on your trailer. This simple check can help to ensure a safe and enjoyable journey for yourself and your family and prevent any mishap.

Why Change Your Tire On A Travel Trailer:

Travel trailers are a great way to see the country and enjoy the outdoors, but they can be a hassle if you have a flat tire. Some people may think it’s best to wait for a tow truck or ask for help from a passing motorist, but changing your tire is the best option. Not only will you save time and money, but you’ll also gain a sense of satisfaction from knowing that you were able to fix the problem yourself.

There are a few reasons why you should change your flat tire on a travel trailer . First, it is a good idea to know how to do it in case of an emergency. Second, it can be a difficult and dangerous task if you don’t know what you’re doing. Third, it can be time-consuming and expensive to have someone else do it for you. 

If you’re on the road and have a flat tire, you may not be able to find a service station or repair shop that can help you. fifth, changing a flat tire is not as difficult as it may seem, and with a little practice, you can become proficient at it. By changing your flat tire, you will save money and be able to continue your journey without delay.

Final Thoughts

Changing a tire on your travel trailer doesn’t have to be a daunting task. With the right tools and a little bit of know-how, you can have that old tire off and the new one installed in no time. Just remember to take your time and stay safe while you work! Have you ever changed a tire on your travel trailer? Let us know in the comments below.

You May Also Be Interested In

How To Winterize A Travel Trailer (Step by Step Guide)

7 Best Travel Trailer Leveling Blocks (2022 Review)

3 Best Electric Heaters For Your Travel Trailer (2022 Review)

Leave a Comment Cancel reply

Recently published guides.

Buying a Generator for RV Life

RV Refrigerators: How Do They Work?

How to Repair Norcold Fridge Flap

Top 11 best jack for RV tire change with Buying Guide 2022

Last Updated on December 15, 2022 by tawhid

There are many types of jack for RV tire change, but some are more suitable for certain applications than others. For example, if you have a larger vehicle with a heavy load, you may want to consider buying a jack with a heavy-duty base and a large capacity. However, if you are using your jack to change a tire on a smaller vehicle, you may prefer a lighter jack with a small base.

In this article, I have listed the best jacks for RV tire change. There are many different types of jacks. I have taken into account the base size, base strength, weight, height, and maximum capacity to help you choose the most suitable jack for your RV tire change.

The top 11 best jacks for RV tire change are listed below. Let’s find out the best jacks for RV tire change and use them to change your RV tires.

1. BAOSHISHAN 6 Ton Double Ram Bottle, Jack

A popular choice from BAOSHISHAN, the 6-ton double ram bottle jack is a very versatile piece of equipment that will let you perform all sorts of tasks.

It features a great load capacity, which lets you lift up to 6 tons of weight. It has a very smooth motion, so it will be easy to use for all kinds of applications.

The double ram design with an extension screw allows you to reach heights up to 15.75 inches. This is a pretty impressive feat for any bottle jack and makes it a great option for heavier vehicles.

While the lift height is adjustable, it can be a little bit tricky to get the desired height right.

The jack has a safety valve, so you can be sure that it won’t let you hurt yourself.

BAOSHISHAN backs up their products with a 1-year warranty, so you can be sure that they’re good quality.

We recommend this bottle jack to anyone who needs a high-quality, reliable bottle jack.

2. Portable Hydraulic Ram Welded Bottle Jack

If you’re looking for a good bottle jack, then the Momotata Portable Hydraulic Ram Welded Bottle Jack with Carrying Case is a good option.

While it’s made for heavy-duty use, it’s still quite portable and is able to handle the weight of up to five tons. It’s also designed to work in a wide variety of different situations, including when you’re working on farm equipment or heavy machinery, and for emergency situations.

It’s made from high-quality carbon steel and has a built-in 2-ton capacity, but you can choose between 5, 8, 10, or 20-ton capacities.

The piston rod and inner bar aren’t in direct contact with each other, so the friction of the inner bar is reduced to the least, making this jack extremely durable.

There’s also a set of two handles that can be connected to each other, making it easier to carry around and store. They’re also adjustable, so you can adjust the height to suit your needs.

The bottle jack has a lift valve to ensure the oil circulates smoothly, and you’ll be able to get a better grip on the bottle.

If you want a good bottle jack that’s versatile and easy to carry around, then this is one of the best options available.

3. Blackhawk B6350 Black/Red Fast Lift Service Jack

The Blackhawk B6350 is an excellent option for anyone who needs a heavy-duty, professional-grade service jack. It features an alloy steel frame, a 3.5-ton load capacity, and a swivel saddle to provide easy positioning.

You get a very useful and versatile piece of equipment that’s easy to use and can handle almost anything you throw at it. The unit is built to last, with an average lifespan of 20 years or more.

While it’s ideal for professional use, it’s also suitable for regular garage work.

It comes with a quick-release pin, so you can easily swap out parts when they break down, and it’s backed by a 5-year warranty.

There are numerous advantages to using a service jack instead of a hand truck or dolly.

First, it gives you the freedom to move around the area, and you can position it in any direction you want. You can even lift it up to overhead cabinets to reach items that are difficult to access.

Second, it reduces the risk of injury, as you’re not lifting heavy objects with your hands. Third, it’s safer for the person who’s using it, since there’s no chance of dropping it or tipping it over.

Finally, service jacks are more powerful than hand trucks, so you don’t have to use as much force to lift things.

4. BAOSHISHAN 3 Ton Bottle Jack

For those who have trouble finding a good bottle jack to lift their RV, this is the right choice. The Baoshishan bottle jack is one of the most affordable and reliable options available.

It has a compact design and comes with a carrying case, so it’s easy to carry around when you need to use it.

The jack is made from high-quality alloy steel, which is more durable and sturdy than other plastics.

It has a wide range of lifting heights, which makes it useful for most cars.

You can adjust the height of the jack with the help of a screw top, which is a unique feature.

With a carrying case, you don’t have to worry about losing it.

While the jack is not very heavy, the carrying case is quite big, and it’s designed to make it easy to carry.

This is a great product, and we highly recommend it to anyone who needs a reliable bottle jack to lift their RV.

5. Torin T90413 Big Red Hydraulic Bottle Jack

This is the largest hydraulic bottle jack available, which makes it ideal for lifting vehicles with massive tires and heavy loads.

It’s easy to use. Just loosen the handle, put the vehicle down, and press the lever, and you’ll have the car or RV lifted in seconds.

This bottle jack is heavy-duty and reliable. With a 4-ton lifting capacity, it can easily lift up to 4,000 pounds. This means you’ll be able to lift the car or truck right off the ground, and it’ll be stable during the entire process.

It’s extremely strong and durable. The entire jack is made of solid alloyed steel that’s been drop forged to ensure strength and durability. It’s got a smooth, comfortable feel and is easy to maneuver.

This bottle jack is also very versatile. It can lift just about any vehicle with a wide, flat surface, including pickup trucks, cars, SUVs, and travel trailers. You’ll be able to lift a variety of different vehicles with this jack, and it’s great for people who need to get their vehicle out of a tight spot.

There’s also a carrying case included in the package, which is useful for storing the jack when it’s not in use.

So if you’re looking for a high-quality, reliable, and versatile jack that’s built to last, then buy the Torin T90413 Big Red.

6.Powerbuilt 3 Ton All-in-One Hydraulic Bottle Jack and Jackstand

When it comes to jacks, we have two kinds: bottle jacks and hydraulic jacks. We use bottle jacks for cars, but if you’re planning on lifting an RV, we recommend using a hydraulic jack.

The Powerbuilt 3 Ton All-in-One Hydraulic Bottle Jack and Jackstand in One Unit, Compact, Wide Base, 11- 21 Inch Range, Eliminates Jackstands, for Unibody, Trucks, SUVs, RVs, Cars, Trailers, ASME – 620471 is one of the best hydraulic jacks on the market.

It’s compact, safe, and has a wide base to prevent sinking. It’s ideal for lifting trucks, SUVs, and RVs. You won’t need to worry about any of the problems associated with a traditional jackstand.

Hydraulic jacks are much safer than bottle jacks, which is why we recommend them over the former. They have more control, and they’re less likely to tip over.

Hydraulic jacks come with a safety bar that locks the jack into the desired height. This makes lifting and holding a vehicle much easier, and it keeps you and your vehicle safe.

With the safety bar, the jack can only be used at the desired height. It’s ideal for lifting a car, truck, or SUV. If you want to lift a truck, you can set the height to 21 inches.

The bottle jack is designed to be used with a car, but it can be used with a truck too. The Powerbuilt 3 Ton All-in-One Hydraulic Bottle Jack and Jackstand in One Unit, Compact, Wide Base, 11- 21 Inch Range, Eliminates Jack stands, for Unibody, Trucks, SUVs, RVs, Cars, Trailers, ASME – 620471 is also designed to work with regular cars, and it’s easy to adjust the height to suit your needs.

We highly recommend this bottle jack for anyone who’s planning to lift a truck. It’s safe, it’s easy to use, and it works perfectly for all kinds of vehicles.

Now We Review  5 Electric jack for RV  tire change

7. Blackhawk RV Camper (Trailer) Power Tongue Jack

We’ve found a great deal on Blackhawk trailers, and we’re happy to recommend them to anyone looking for a trailer camper to use as a home or office.

They have a wide variety of trailers for sale, and most of them come with a 12-month warranty, so you know that you’re getting good quality.

The power tongue jack is quite easy to operate, and it has an LED light for nighttime use. If you need to work on your trailer at night, this jack will help you out.

The jack itself is made of heavy-duty materials that won’t easily break, and it has a removable foot pad. This is ideal for those who want to use it in their garage, workshop, or other areas where they don’t want to have to worry about getting dirt or debris on their jack.

The jack also features a dual LED light that provides you with enough illumination when you need it. This is especially useful if you’re working on your trailer at night and you want to avoid tripping over anything.

You’ll be pleased to know that the jack is very easy to operate. You can easily lift it up using the hand crank, and you can lower it down again using the same mechanism.

The jack is also quite sturdy, and it will be able to support up to 3500 pounds. If you’re planning to use your camper for recreational purposes, you should be fine using this jack.

We think that this is one of the best power tongue jacks on the market, and it comes with a 12-month warranty too.

8. BEETRO 4000 lbs Electric Trailer Jack

BEETRO is one of the leading manufacturers of trailers, campers, RV, and towable vehicles.

They have a wide variety of products, including a portable trailer jack that can lift up to 4000 pounds.

The jack comes with a 22-inch lifting range, and the load capacity can be increased to 5000 pounds.

There’s a 50-inch power cord, and the jack is 12V DC powered, so it can be used with 12V DC battery positive.

It’s perfect for people who need to jack up a trailer, RV, or towable.

You can adjust the drop height of the legs using the 5-step leveling mechanism, and the drop is also adjustable.

The jack is made of alloy steel, so it’s strong and durable, and it won’t rust.

Installation is also very simple, as it just requires you to push the button of the jack, and the jack will raise or lower automatically.

The electric trailer jack has a built-in circuit breaker, which will automatically trip and reset in case of an emergency.

It’s equipped with a LED light, and the light is bright enough at night.

In addition, it has a bubble level, and you can easily see whether the jack is level.

It’s a safe product, and you can easily operate it manually too.

So if you need a trailer jack, then get the BEETRO. It will do the job well, and you can feel comfortable knowing that it’s safe.

9. RVMATE Electric A-Frame Trailer Jack

This is one of the best electric A-frame trailer jacks available, and it’s one of the most versatile as well.

It’s incredibly durable, and it’s extremely strong and able to lift up to 3500 pounds. While most of the other electric trailer jacks are only capable of lifting up to 500 pounds, this one can lift up to 3500 pounds.

It’s also highly mobile, with a wide range of motion – it can go up to 18 inches, and it can be retracted down to five and a half inches. This means that you can use this trailer jack to raise and lower vehicles of different sizes and weights.

The electric A-frame trailer jack is made of heavy-duty steel, which means it’s not going to break easily, and it won’t rust.

Another feature is that it has LED lighting, which will make it easier to use in the dark.

You can also use it for pulling small trailers, like car hauling trailers, so that you can haul small things around.

The manual crank handle is a nice feature, and it makes it a lot easier to operate the trailer jack.

In terms of design, it’s a pretty simple design, but it does its job very well.

It’s ideal for people who have an RV, and want to attach it to their vehicle.

It’s a great choice, and it’s a great product overall.

10. Lippert Components – 813748 Power Stance Tongue Jack

We love the Power Stance Jack. Not only is it incredibly easy to operate, but it’s also extremely durable, and we can’t think of a better way to add a little convenience to your trailer.

If you’re thinking about buying a tongue jack, then this is the one you should consider.

The Lippert Components 813748 is one of the best tongue jacks that you can get. It’s powerful, durable, user-friendly, and efficient.

It comes with a 2-way to the 7-way powering system, which means that it’s compatible with almost all of the popular RV tow vehicles. It has an integrated safety chain storage ring and LED lights that will illuminate for 5 minutes before turning off.

The Power Stance Jack also features a built-in safety chain storage ring, which is nice because you can clip your chains out of the way instead of dragging them or wrapping them around the jack. It’s also designed to fit in a variety of vehicles, which means you can use it in a truck, van, or SUV.

The head cover is also very easy to clean, and the light feature is pretty useful too.

We highly recommend this product to anyone who wants to make sure their trailer is safe and secure when they’re not using it.

11. HOTSYSTEM 4000 lbs Electric Trailer Power A-Frame Tongue Jack

HOTSYSTEM is a reputable name in the trailer industry, and this product is no exception.

The HOTSYSTEM 4000 is a great trailer jack for leveling your RV or camper . It’s lightweight and portable and has a powerful motor that won’t let you down.

Not only does it look cool, but it also works really well. It’s made of heavy-duty galvanized steel pipe, which is great for any heavy loads that you’re hauling. It has 6 mounting holes to help you attach it to different types of trailers, including RVs and camping trailers.

One thing that I love about this is that it’s easy to use. There’s no need to read instructions. You simply plug the 12-volt battery into the trailer and put the trailer jack in the proper position. You can then easily adjust it with the electric leveling system.

Another cool feature is that the LED light makes it easy to see in the dark, and the leveling gauge helps you get it properly leveled.

It has a large footprint that will support up to 4 tires, and it’s designed to fit on almost any trailer hitch with a 1” ball.

When it’s not in use, it folds down to a small size and you can store it away. The product comes with a 12-volt battery that powers the electric leveling system and lights, and it will last you for years of use.

HOTSYSTEM also has a 24-hour customer service team that is there for you round-the-clock, so if you have any questions, just give them a call and they’ll help you out.

For a reliable and durable trailer jack, go with the HOTSYSTEM 4000. It’s a great choice for camping and travel.

Buying Guide for jack for RV tire change

An RV jack is a device that you can use to lift your RV or other vehicles onto a flat surface. If you have ever lifted an RV or other vehicle into position then you probably know how hard it can be.

You may need to do it multiple times to get the vehicle into position. This is especially true if you have a heavy vehicle such as a fifth wheel or travel trailer. You may also have to lift the vehicle into position over a curb or other obstacle.

It can be difficult to get the vehicle in a position, to begin with. It is even harder to get it into position if you have a heavy vehicle. In order to get the vehicle into position, you will need to lift the vehicle.

You will need to use a jack to lift the vehicle. You can either use an electric jack or a gas-powered jack. Electric jacks are easy to operate. You just plug them into an outlet and they are ready to go. Gas-powered jacks are more complicated to use.

You will need to use a manual or hydraulic jack to lift the vehicle. Manual jacks are easier to use than hydraulic jacks. Hydraulic jacks are more complicated to use because they are operated by a hand pump.

What Kind of Jack Should I Use?

There are several kinds of jacks. You will need to choose the right kind based on your needs. Here are some things to consider before you buy your jack.

Power Source

You will need to determine how you plan on operating the jack. Do you plan on using it frequently or only occasionally? Will you be lifting the vehicle into position often or only occasionally?

If you are going to be using the jack frequently, you will need to choose a battery-powered jack. If you are going to be using the jack

There are many different types of RV jacks on the market today. If you are looking to buy a new RV jack, you will need to decide which type will suit your needs the most. It will be important to consider a number of different factors such as what type of RV you own and what type of vehicle you will be moving.

Types of RV Jacks

There are two types of RV jacks that you will need to consider buying. These are the platform jack and the hydraulic jack.

Platform Jacks

Platform jacks are very common and are available in both electric and manual versions. Platform jacks are generally found in the rear of the vehicle and are designed to lift the entire vehicle off the ground.

Hydraulic Jacks

Hydraulic jacks are also known as hydraulic lifts. These are usually found in the front of the vehicle and are powered by a pump. This pump pushes oil down a tube and into the cylinder. When the piston is pushed down, it compresses the air inside the cylinder and causes the jack to raise the vehicle.

What kind of jack do you use for an RV?

There are jacks for RVs that are made specifically for the weight and size of the vehicle. The three main types of RV jacks are leveling jacks, stabilizing jacks, and wheel chocks. Leveling jacks are used to level the RV when it is parked. They can be adjusted to different heights and have a variety of uses. Stabilizing jacks are used to keep the RV from moving while it is parked. They can be attached to the frame of the RV or the ground. Wheel chocks are used to keep the wheels from rolling while the RV is parked. When choosing a jack for an RV, it is important to consider the weight and size of the RV. The type of jack you use will also depend on where you plan to park the RV.

What size jack do I need for my camper?

When shopping for a new RV or camper, one of the most important things to consider is what size jack you will need. There are many different factors that go into determining the right size jack for your camper, including the weight of the camper, the type of tires, and the terrain you’ll be using it on. The weight of your camper is one of the most important factors in determining what size jack you’ll need. The heavier your camper is, the more support it will need from a jack. If you’re unsure about how much your camper weighs, you can always check the manufacturer’s website or ask a salesperson. Another important factor to consider is the type of tires on your camper. Some tires are designed to be used on softer surfaces, like dirt or gravel, while others are made for harder surfaces, like pavement.

If you have a camper, you need to have a jack that can lift it. But what size jack do you need? The answer to that question depends on the weight of your camper. If your camper is less than 6,000 pounds, you will need a jack that can lift 3,000 pounds. If your camper weighs more than 6,000 pounds, you will need a jack that can lift 6,000 pounds. To figure out what size jack you need, simply weigh your camper and then divide that number by two. That will give you the weight that your jack needs to be able to lift.

Where do you put the jack when changing a travel trailer tire?

If you have a travel trailer, you know that flat tires are inevitable. changing a tire on a travel trailer is different than changing a tire on a car. The first thing you need to do is find a level spot to park the trailer. Once the trailer is parked, you need to put the jack under the frame of the trailer . It’s important to make sure the jack is placed in the correct spot, or else it could cause damage to the trailer. After the jack is in place, start lifting the trailer until the tire is off the ground. then, remove the lug nuts and take off the tire. To put on the new tire, reverse these steps. First, put on the new tire and then screw on the lug nuts. Lower down the trailer and remove the jack. That’s all there is to it!

How do you jack up an RV?

If you own an RV, then you know that one of the most important maintenance tasks is to keep the tires properly inflated. But what do you do when you have a flat tire? You need to know how to jack up your RV. First, find a level spot on which to park your RV. Then, locate the jack points on your RV. These are usually located near the wheels. Once you’ve found the jack points, place the jack underneath and start cranking it up. Be sure to monitor the pressure in the tire as you’re jacking up your RV. You don’t want to overinflate the tire and cause further damage. When you’ve reached the desired pressure, lower your RV back down and remove the jack.

What is an RV Stabilizer jack?

An RV stabilizer jack is a device that is used to level and support an RV. It is placed under the RV’s frame and helps to keep the RV level stable. The stabilizer jack can be adjusted to different heights to accommodate different RVs. It is important to use a stabilizer jack when parked on uneven ground, such as on a campsite, to help prevent the RV from tipping over.

The jack for RV tire change is a tool that is used to raise and lower the vehicle’s tires so that they are either on the ground or off the ground.

This is one of the most important tools that you need to have around when you travel because it is a necessity to change the vehicle’s tires when they become damaged or worn out.

It is necessary to keep in mind that not all jacks are made equal, and it is important to consider the features of the jack that you are going to purchase before you do so.

There are many types of jacks available for sale, and they can range in price from $20 all the way up to several hundred dollars.

I have compiled a list of the top eleven best jacks for RV tire change that you can buy today, and you can read on to see if one of these jacks is a good option for you.

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

Dr Hiker is reader-supported. When you purchase via links on our site, we may earn an affiliate commission at no extra cost to you. Learn more .

Changing Your Travel Trailer Tires - Guide Lines

Have you ever considered changing your travel trailer tires? The owner should replace the tires and the tires wear out. Changing your travel trailer tires is a process that may complete with minimal effort and few tools.

You've just bought a used travel trailer, and one of the first things you need to do is change the tires. Suppose you're unsure how to jack up a dual-axle travel trailer or where to start.

And if you don't know what type of tire you've got or don't want to get an estimate from someone else, then this article will help you come up with the best option for your situation. You may also like to visit our guide about how to use tarp as a canopy .

Needs For Changing Travel Trail Tires

Travel trailers have many components that all need maintenance from time to time. You will pay for repairs or replacements later if you don't do them.

It's important to check out your tires once a month and change them when necessary. Here is the most common reason why you should change your travel trailer tires:

Wheel Replacement

The biggest reason for changing your tires is that they are worn out. Many people don't realize how much tread can be lost on their wheels until it's too late. If it will work for more than one year since you bought your trailer, it's probably time for new tires.

By replacing steel or iron rims with those made from aluminum or stainless steel, you can reduce the weight of your wheels, making them easier to balance while traveling at high speeds.

When Should You Change Your Travel Trailer Tires?

It's important to keep your travel trailer tires in good condition, so you should change them when they indicate wear and tear. Look out for these indicators:

• The tread on your tires is getting thin
• The tires are losing air pressure
• There are bulges or bumps on the surface of the tires
• The tires are old and have been used a lot

What Supplies Do You Need

You're going to need a few supplies before you start changing your travel trailer tires. Here's what you'll need:

A jack And Jack Stands

Jacks are available in various sizes, so it’s important to choose the right one for the job. A good set of jack stands will keep your trailer straight and level.

A lug wrench is the most important tool you will need to change your tire. This permits you to remove and replace the lug nuts on your rims.

The lug nuts hold the wheels of your travel trailer in place, but they can be very difficult to get off yourself. Due to this reason, it is recommended that you have at least one other person with you when changing a tire.

Socket Wrench

This tool is used to remove and tighten lug nuts. A socket wrench with a ratcheting handle is best because it allows you to loosen and tighten without having to keep re-adjusting the handle every time you change a tire.

The tire iron is used for removing and reinstalling lug nuts. It also has an attached brush that comes in handy when cleaning up any dirt or debris that may have fallen into your wheel well during the installation or removal of your wheel assembly.

This tool is used to tighten lugs and remove them from the wheel well. If you don't have pliers, you can use a pair of needle nose pliers, as long as they have enough gripping power.

A chisel is a good tool to have on hand when working on your trailer. The chisel removes the lug nuts from the wheel hubs and uses an air wrench to start the removal process. You may also need a tire iron or breaker bar if you do not have a chisel handy.

When you change a tire, you must ensure it is the right size and type. If you have a spare, then use that instead. You may need a new jack and jack stand to help lift the trailer off the ground.

Make sure you have everything before you start. It'll make the process a lot easier.

Method of Change Travel Trailer Tires?

So, you're ready to change your travel trailer tires? Great! Here's a step-by-step guide to making the process as easy as possible.

• First, you'll need to jack up your trailer and put it on jack stands. You'll want to consult your owner's manual in many different ways to do this.
• Once your trailer is in the air, remove the old tires and replace them with new ones. Follow the manufacturer's recommended torque settings when tightening the lug nuts.
• Lower your trailer back to the ground and give the tires a few good spins to ensure they're seated properly. Voila! You're good to go.

Tips for Changing Travel Trailer Tires

You're probably wondering how to go about changing your travel trailer tires. Well, wonder no more! Here is a complete guide that will take you through the process.

• First, you'll need to gather some supplies. This includes a lug wrench, a jack, a tire iron, and some lug nuts. If you have everything prepared, it's time to get started.
• First, loosen the lug nuts on the wheel you will change. Please do not remove them yet. Next, jack up the trailer and secure it on jack stands. Once the trailer is in the air, remove the lug nuts and take the wheel off.
• Install the new wheel and reattach the lug nuts. Please ensure they're tight before lowering the trailer back to the ground. And also, do like same for the other three tires, and you're good!

How Do I Dispose of My Old Travel Trailer Tires?

So, you're getting new tires for your travel trailer. Congratulations! But now you stoop up to the frightening task of getting rid of your old ones. What do you do?

• First, don't just leave them by the side of the road. That's illegal, and it's also bad for the environment. Plus, it isn't polite.
• The best way to dispose of your old tires is to take them to a tire recycling carrier. There are many across the country, so chances are there's one near you. They'll recycle the tires into new products, like flooring and playground surfaces.
• So don't feel guilty about getting rid of your old tires—you're doing something good for the environment.

When it comes time to change your travel trailer tires , it's important to know exactly what you're doing. This blog will walk you through the strategies, so you can handle the job yourself and save money.

It is necessary to wear safety goggles and gloves when working with tires and take your time so you don't make any mistakes. With patience and this guide, you'll have those new tires on in no time.

How To Wash Carhartt Jacket? Helpful Tips For Best Result

What Is Canyoning? Here Is Everything You Need to Know

Weight Limit For Air Mattress - Be Potential About Weight

Hiking In Crocs - Unconventional Footwear For Adventures

Costco Propane Refill - Does Costco Facilitate In 2023

Costco Gas - Quality, Savings, and Convenience for Your Need

• Tools & Equipment
• Tire & Wheel Tools
• Tire Repair Tools

Return this item for free

You can return this item for any reason: no shipping charges. The item must be returned in new and unused condition.

• Go to Your Orders to start the return
• Print the return shipping label

Add an Accessory:

Image Unavailable

• To view this video download Flash Player

Trailer Aid Camco Plus' Tandem Tire Changing Ramp with 5.5-Inch Lift, Black

Ships In Own Container

Standard Packaging

Trailer Aid

Trailer Aid Plus

Purchase options and add-ons

About this item.

• Optimal Material: Tandem tire changing ramp is made of strong polymer and is light enough to easily be carried by hand, making it extremely useful to travel with
• No Load: Engineered specifically for recreational trailers, this camper tire changing ramp allows you to change your flat tire without having to remove the horses or cargo
• Product Weight: The trailer ramp weighs 5 lbs
• Features: This trailer tire changing ramp has an additional inch of lift compared to the original Trailer Aid; can withstand up to 15,000 lbs; perfect for performing maintenance on brakes, wheels, and axles
• Quality Products: Camco makes quality products for RVing, boating, camping, towing, tailgating, and grilling that help take your passion for the outdoors to the next level

There is a newer model of this item:

Frequently bought together

Similar items that may ship from close to you

From the brand

Camco makes quality products for RVing, boating, camping, towing, tailgating, grilling and more. Our products help take your passion for the outdoors to the next level.

At heart, Camco is a small company with big aspirations. Since 1966, we have earned a reputation for providing superior goods with high customer approval.

What's New

Visit the Store

Fresh Water

Towing & Leveling

Liquid Propane

Maintenance

RV Lifestyle

From the manufacturer

Change A Flat Tire Anywhere, Anytime-Without Help

Trailer-Aid and Trailer-Aid Plus offer a fast, safe and easy way to change a trailer’s flat tire. A flat tire never happens at a good time, usually when you are by yourself on a busy highway. Trailer-Aid and Trailer-Aid Plus allows anyone to change a flat tire anywhere, anytime—without help, without a jack and without unloading.

Trailer-Aid

Trailer-Aid can withstand weights up to 15,000 lbs, and is waterproof and rustproof. Made from lightweight super strong polymer, Trailer-Aid is easy to travel with and makes changing your trailer tire simple, even if you're alone. The front holes and rear slot allow for easy handling and access. Small and lightweight (only 5 lbs), Trailer-Aid stores easily and unobtrusively. It is light enough to be carried on the finger tips, and has clean edges that won’t snag clothing or hurt hands. It offers 4-1/2” of lift giving you the clearance you need to get the job done.

Trailer-Aid Plus

Trailer-Aid Plus offers all the same benefits as the Trailer Aid but is engineered specifically for recreational trailers. It gives your tire 5-1/2” of lift, an extra 1" more than Trailer-Aid, for performing maintenance on brakes, wheels and axles.

About Camco Manufacturing

Camco proudly manufactures many of our 4,000+ products in 5 facilities across the United States, including items from flagship brands like RhinoFLEX, TastePURE, TST, Currituck, and FasTen.

Product Description

Camco's Trailer Aid Plus is the fast, safe, and easy way to change a trailer tire on a tandem wheeled trailer. You pull the good tire up onto Trailer Aid Plus in order to raise the flat tire up 5.5 inches for changing. Trailer Aid Plus lifts 1 inch higher than our original Trailer Aid, making it perfect for routine maintenance on RV trailers; this tool even lets you change a flat tire on your horse trailer without removing your horses. Moreover, it is quite user-friendly and easy to store away when not in use. Please note that this product will not work with trailers with narrow axles with equalizing leaf springs or axles with spacing greater than 36 inches axle to axle. Camco has been creating your favorite outdoor products like camper accessories, horse trailer accessories, and trailer accessories since 1966, earning a reputation for providing superior goods with high customer approval.

Trailer-Aid can withstand weights up to 15,000 lbs, and is waterproof and rustproof. Made from lightweight super strong polymer, Trailer-Aid is easy to travel with and makes changing your trailer tire simple, even if you're alone. The front holes and rear slot allow for easy handling and access. Small and lightweight (only 5 lbs), Trailer-Aid stores easily and unobtrusively. It is light enough to be carried on the finger tips, and has clean edges that won’t snag clothing or hurt hands. It offers 4-1/2” of lift giving you the clearance you need to get the job done.

Trailer-Aid Plus offers all the same benefits as the Trailer Aid but is engineered specifically for recreational trailers. It gives your tire 5-1/2” of lift, an extra 1" more than Trailer-Aid, for performing maintenance on brakes, wheels and axles.

Camco started in 1966 with one employee and one product. Today, over 40 years later, we have more than 350 employees, over 3,000 products and five manufacturing facilities to better serve our customers’ needs. Our home office is in Greensboro, North Carolina. We also have locations in Elkhart, Indiana; Portland, Oregon; Leominster, Massachusetts and our newest facility in Beilun, China.

Competitive pricing, superior service, quality products and customer satisfaction are the foundations upon which Camco operates. Our friendly, knowledgeable customer service staff stands ready to assist our customers with any questions. At Camco, we take pride in meeting the ever changing demands of a challenging marketplace while serving you, our most valuable asset.

Product information

Technical details, additional information, warranty & support, what's in the box.

• Tire Changing Ramp

Compare with similar items

Looking for specific info, customer reviews.

Customer Reviews, including Product Star Ratings help customers to learn more about the product and decide whether it is the right product for them.

To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyzed reviews to verify trustworthiness.

Customers say

Customers like the quality, value, performance, ease of movement, and weight of the ramp. They mention that it's well built, durable, and works well. Some appreciate the weight and ease of use. That said, opinions are mixed on size.

AI-generated from the text of customer reviews

Customers like the performance of the ramp. They say it works well, is excellent to use, and is very useful. Some mention that it works great for dual axle boat trailers and makes greasing bearings a breeze. Overall, most are happy with the performance and durability of the product.

"...On the concrete it works great and provides more than enough clearance to remove either a flat tire or fully inflated tire...." Read more

"...All in all I think it will work very well in most situations . hoping in an emergency that will speed up changing a flat." Read more

" It works perfectly and makes changing a tire on a travel trailer very easy." Read more

" Works well " Read more

Customers like the quality of the ramp. For example, they say it's well built, durable, and stable. Some mention that it'll be good material for an RV. Overall, most are satisfied with the product's quality.

"...So far it has held up to the use and looks to be solidly made ...." Read more

"...They are very strong and easy to use on a full or empty trailer. It is really easy to pull up on this ramp to change a tire and not mess with a jack...." Read more

" Nice sturdy ramp . Good ramp angle so it’s easy to back up the trailer onto it." Read more

" built solid . deserve 5 stars even if i think it should be little wider to accommodate big tires." Read more

Customers find the ramp easy to use. They mention it's simple, convenient, and saves time by not having to drag out jacks and boards. Some say it works perfectly and makes changing a tire on a travel trailer very easy.

"...Much quicker and easier than dragging out a jack , crawling under to place it just right. I do suggest going up it very slowly...." Read more

"It works perfectly and makes changing a tire on a travel trailer very easy." Read more

"...Honestly, I was super impressed with how easy and efficient it made the process ...." Read more

Customers like the value of the ramp. They say it's well worth the cost, a simple to use, inexpensive trailer aid, and a time saving device.

"Liked the product. Easy to use. Worth the money ...." Read more

"... Well worth the cost . I don't look forward to flats, but I don't dread them like I used to." Read more

"...Finally needed it on a family vacation this summer but it was worthless ...." Read more

"...This was at a very good price on Amazon ." Read more

Customers are satisfied with the weight of the ramp. They mention that it is fairly light and easy to move around. They also say that it takes a lot of weight off the jack when changing the tire. Overall, most are happy with the product's weight.

"...For as heavy duty as it needs to be to bear the weight, it is fairly light and easy to move around...." Read more

"...Super durable, not that heavy , easy to use. Have one in my enclosed car hauler for when that day comes." Read more

"...However, they are light weight but in use prove to be heavy weights. If you have a tandem trailer, these are a must." Read more

"...All in all, well made, light weight and handy." Read more

Customers find the ramp easy to move. They mention it's compact, lightweight, and stores easily for travel. Some say it'll stow away in any side compartment. Overall, customers recommend the product for its ease of movement and compact size.

"...Its a little bulky but way lighter than a jack and I would highly recommend this to anyone if it fits your needs!" Read more

"...as it needs to be to bear the weight, it is fairly light and easy to move around ...." Read more

"... So easy to use and store . I highly recommend it." Read more

" Great for my camper " Read more

Customers are mixed about the size of the ramp. Some mention that it's compact and will stow easily for travel, while others say that it looks kinda small and narrow. Some say that the top peak area does make it difficult to not overturn, while still others say it'll not get the second tire off the camper.

"...This product isn't quite tall enough to get the other wheels off the ground entirely...." Read more

"...carry the additional floor jack in our horse trailer now so this takes up less room ...." Read more

"This item is not tall enough to change a flat tire on your RV. We live in Montana not far from Yellowstone National Park...." Read more

"...It’s small it’s light very durable. Very well-made lifetime guarantee can’t beat it." Read more

Customers are dissatisfied with the lift. They say it doesn't lift their trailer high enough to change a tire. Some customers also mention that the ramp keeps sliding, preventing them from raising the trailer.

"...Easy to use. Worth the money. Now after saying that, the ramp isn't tall enough to change fully inflated tires on my tandem axel RV...." Read more

"...My 2008 Outback has new ST205/75R14 tires and it would not lift my trailer high enough either, to change the other tire...." Read more

"...this weekend at the camp ground we stayed at and it would not lift their trailers high enough to change the other tire ethier...." Read more

"...springs, this product will not work properly, because it will not lift the bad tire off the ground...." Read more

Reviews with images

• Sort reviews by Top reviews Most recent Top reviews

Top reviews from the United States

There was a problem filtering reviews right now. please try again later..

Top reviews from other countries

• Amazon Newsletter
• About Amazon
• Accessibility
• Sustainability
• Press Center
• Investor Relations
• Amazon Devices
• Amazon Science
• Sell on Amazon
• Sell apps on Amazon
• Supply to Amazon
• Protect & Build Your Brand
• Become an Affiliate
• Become a Delivery Driver
• Start a Package Delivery Business
• Advertise Your Products
• Self-Publish with Us
• Become an Amazon Hub Partner
• › See More Ways to Make Money
• Amazon Visa
• Amazon Store Card
• Amazon Secured Card
• Amazon Business Card
• Shop with Points
• Credit Card Marketplace
• Reload Your Balance
• Amazon Currency Converter
• Your Account
• Your Orders
• Shipping Rates & Policies
• Amazon Prime
• Returns & Replacements
• Manage Your Content and Devices
• Recalls and Product Safety Alerts
• Conditions of Use
• Privacy Notice
• Consumer Health Data Privacy Disclosure
• Your Ads Privacy Choices

SAVE NOW! GET UP TO $500 OFF SELECT DUMP MODELS DURING THE DUMP & DRIVE SPRING SALES EVENT. SALE ENDS MAY 31 . VIEW DETAILS

Featuring the versatility to haul a wide variety of scrap and garbage to dirt and gravel, our Dump Trailers make it easy to move, load, and unload materials from one place to another. With various lengths, capacities, axles, hydraulic upgrades, and other options (including our roll-off Rollster™ model) to choose from, you can tailor your trailer to haul exactly how you need it to.

72" Tandem Axle Dump (D3)

60" Utility Dump (D5)

96" Deckover Dump (D8)

Tandem Dual Dump (DD)

HD Low-Pro Dump (DE)

14K Low-Profile Dump (DG)

14K Low-Profile Dump PRO (DL)

83" Low-Pro High Side Dump (DM)

Roll-Off Dump (DR)

83" Pro-Lift Dump (DT)

Voyager Dump (DV)

16K Low-Profile Dump PRO (DX)

Featuring super-wide deck and drive-over and removable fender options, our Car Haulers are purpose-built for safe and secure car transport. Designed with lower deck heights, these trailers make hauling cars a breeze—keeping your prized possessions ready to go for the long road ahead.

5" Channel Buggy Hauler (B5)

6" Channel Super-Wide (B6)

8" Channel Super-Wide (B8)

4" Channel Carhauler (C4)

5" Channel Carhauler (C5)

Steel Deck Car Hauler (CH)

Designed and constructed for maximum load and surface and strength, our Deckover Trailers are purpose-built to handle the most challenging adventures. Ranging from 16 to 44 ft, they’re available in bumper pull or pintle-eye and in various axle configurations—with hauling capacities ranging from 14,000 to 25,000 lbs.

8" I-Beam Deckover (F8)

Medium Duty Deckover 6" Channel (L6)

Low-Pro Pintle With Duals (PL)

Featuring lower deck heights for safe and easy vehicle transport, our Equipment Trailers are designed to accommodate a wide variety of vehicles, tractors, and powered equipment. With super-wide deck options available, our Equipment Trailers offer hauling capacities that range from 4,500 to over 17,000 lbs.

8" Channel Equipment (C8)

6" Channel Equipment (CC)

5" Channel Equipment (CE)

Seamless I-Beam Equipment Trailer (EV)

8" Pro-Beam™ Equipment (H4)

10" Pro-Beam™ Equipment (H5)

8" Pro-Beam™ Super-Wide Equipment (H6)

10" Pro-Beam™ Super-Wide Equipment (H7)

Embark on your most challenging adventures with our Gooseneck Trailers, built for maximum strength and stability when hauling heavy-duty, large, and wide equipment and cargo—safely and securely. Ranging from 16 to 44 ft, they’re available in various axle configurations with hauling capacities ranging from 14,000 to 25,000 pounds.

Low-Pro Flatdeck With Duals (LD)

Low-Pro Flatdeck With 7K Singles (LS)

Low-Pro Flatdeck With 8K Singles (LX)

Low-Pro With Hydraulic Dove (LY)

Featuring hydraulic cylinders to ensure smooth and steady tilt rates and trailer desk designs that reduce load angles, our Tilt trailers are fully equipped to make unloading and loading cargo and powered equipment a cinch. They’re available in various configurations—including single axles, goosenecks, powered tilts, triple axes, and more—with capacities from 5,200 lbs to 28,000 lbs.

Single Axle HD Tilt (T1)

6" Channel Equipment Tilt (T6)

Deckover Tilt (T8)

HD Deckover Tilt (T9)

Powered Full Tilt (TF)

83" Hydraulic Quick Tilt (TH)

HD Equipment Tilt 6" Channel (TJ)

6" Channel Super-Wide Tilt (TS)

Whatever you’re dreaming about doing, our Utility trailers are ready for the task. They’re designed with the potential to add a wide variety of customizable options to ensure you have what you need to fulfill your dreams. From the 8’ single axle to the 22’ tandem (and everything in between) every trailer in this lineup is outfitted with premium materials and components to make sure you’re prepared for the long haul.

14K Angle Pipetop Trailer (P8)

60" Single Axle Channel Utility (U6)

77" Single Axle Channel Utility (U7)

83" Single Axle Channel Utility (U8)

60" Tandem Axle Channel Utility (UC)

77" Tandem Axle Channel Utility (UK)

83" Tandem Axle Channel Utility (UL)

PJ Truck Beds are built for lasting durability and strength. Our best-in-class components and rock-solid construction combine to deliver reliable performance and head-turning good looks. Check out our selection below to find the hardworking PJ body that’s right for your needs.

Aluminum Flat Deck Body (ALGB)

Aluminum Service Body (GUA)

Aluminum Skirted Body (ALGS)

Hotshot Body (GN)

Platform Steel Flatbed (GL)

Platform Steel Flatbed (GLS)

Steel Flat Deck Body (GB)

Steel Gooseneck Tradesmen Body (GT)

Steel Service Body (GU)

Steel Skirted Hauler Body (GH)

Steel Skirted Truck Body (GS)

• Shop Products
• What Drives Us
• PJ for a Cause

Dump Trailers

• Car Haulers

Equipment Trailers

Gooseneck deckovers, tilt trailers, utility trailers, what drives you drives us.

DUMP & DRIVE SPRING SALES EVENT

For the bold professional. meet the voyager series., trailers for wherever you're going.

Constructed to haul anything from sand and aggregate to scrap and building materials.

Designed for safe and easy vehicle transport, and accommodating a wide variety of cars, tractors, buggies, and more.

Offering some of the most versatile and heaviest duty hauling in our lineup, available in a variety of options and configurations.

Purpose-built to safely and securely haul a wide variety of vehicles, tractors, and powered equipment from point A to B—so you’re ready for the task ahead.

Designed to haul large and wide with superior load surface and strength, our Gooseneck Trailers are the safe and secure way to transport heavy-duty equipment and cargo.

Designed to make loading and unloading cargo an easier task with smooth and steady tilt rates and reduced load angles.

Designed to fit your needs through a variety of customizable options and accessories.

Built for lasting durability with the strongest materials and constructed by dedicated professionals.

Exclusive APex Fortified Lumber

Get up to $500 off your next dump trailer with the Dump & Drive Spring Sales event. Offer ends May 31st.

PJ FOR A CAUSE

See how we’re giving back to 25 communities across the United States and Canada.

APEX FORTIFIED LUMBER

Take your decking to the next level with Apex Fortified Lumber—thermally modified wood that delivers the durability you need to take on any challenge you encounter on the road of life. Are you ready to conquer whatever comes your way?

Resources for the path ahead

Start hauling today

Be ready for wherever you go

Keep your trailer on the road of life

Become a PJ ambassador

Are you a dedicated adventurer or a thrill-seeker? Then we want to hear from you.

READY FOR THE CHALLENGE?

• Bahasa Indonesia
• Slovenščina
• Science & Tech
• Russian Kitchen

City of the future: Moscow gets a much-needed makeover

Moscow is now busy freeing itself of vehicles, whereas previously it seemed that “one could expand the roads indefinitely.”

Even if you visited Moscow a couple of years ago, were you to come back now, you would not recognize it. In a matter of just several months in 2016, over 50 streets were revamped, pedestrian areas expanded, and a new type of public transport, the Moscow Central Ring, launched, with high-speed trains connecting parts of the city.

In addition, the city rid itself of dozens of unlawfully built ugly kiosks, stalls and shopping outlets, its squares have once again become welcoming open-space areas, while the huge industrial estates around now defunct plants and factories are being transformed into public areas and residential developments.

It is hard to say whether the city has become greener because the newly planted trees have not yet grown, but the number of birds and squirrels in its parks have definitely increased. That said, these changes have not been free from controversy, and experts and Moscow residents differ in the assessment of the transformation of the city over the past several years.

Pedestrians vs. vehicles

The main conflict underlying the program of improvements to the city consists in the struggle for breathing space between vehicles and pedestrians. To make sure that the city with a population of over 12 million people does not grind to a halt in one huge traffic jam, the Moscow authorities had to expand major roads outside the city center, often at the expense of century-old trees and lawns.

“I still cannot forgive them for what they did to our street! Previously, the pavement was separated from the road by a row of 60-year-old lime-trees. But in order to ease the traffic, they destroyed everything… Now cars are happy,” says Moscow resident Antonina Belova.

In the meantime, in the eastern part of the city, local residents are campaigning against plans to build a road through the forest park on the territory of the 18th century Kuskovo estate, which has the status of a cultural heritage site.

As the head of the Pokrovsky Studio architecture and design bureau, a member of the Union of Architects, Alexander Pokrovsky, points out, there is a permanent conflict between nature and city. His conclusion is simple: “Before you cut down a forest, learn how to plant a new one first.”

At the same time, one could not say that the city authorities are not doing anything in that regard. The city is indeed becoming greener: Over the past several years, many parks have undergone refurbishment and over 160 new ones have been created. Right next to the Kremlin, a new park called Zaryadye is being built, to be opened next year, when Moscow celebrates its 870th anniversary.

At the very heart of the capital, close to historical buildings, there will be a modern park with a no less modern concert hall. It is variety like this that becomes a city’s calling card.

According to Pavel Sonin, the head of the Union of Moscow Architects youth association, Moscow can be summed up in one word: “variegated.” Anybody can feel comfortable in this city because anybody can find a place to their liking: “Moscow is varied and one should value it.”

Furthermore, the Moscow authorities have recently begun to consistently repurpose the city center for use by pedestrians rather than cars: New paid parking areas have been set up, pavements have been expanded at the expense of roads, and there are even tentative plans to introduce a congestion charge.

Architect Alexander Ayrapetov explains that Moscow is now busy freeing itself of vehicles, whereas previously it seemed that “one could expand the roads indefinitely.” However, these initiatives have met with serious resistance from locals who are unwilling to change their habits.

History or pragmatism?

Another topic that Moscow residents cannot agree on is what the city should look like: Should its historical look be restored and new buildings be built if old ones have all been long destroyed? The city authorities are actively repairing facades, restoring historical buildings, and trying to recreate the look of lampposts from old photographs and designs.

Ruben Arakelyan, the co-founder and head of the WALL architecture bureau, is not convinced that one should seek to restore Moscow’s historical appearance no matter what. In his opinion, it is more important to think of quality, which is suffering today, rather than of the visual component: “It is better to invest money, say, in resolving the problem with storm drains than spend it on restoring the authentic look of lampposts.”

That said, the majority of city residents and experts agree that the city should create more public areas where people find it pleasant and convenient to spend their time.

Ruben Arakelyan says that the current boost in the development of the city’s public areas, be it parks or revamped former industrial estates, has to do with the fact that the amount of time people spend out is increasing, so there is a demand for a good-quality urban environment.

Moscow resident Olga Voronova agrees. She admits that she used to dislike Moscow, whereas now she is enjoying living in the capital: “I like the way the city is decorated, I like the new interesting arts areas. Generally speaking, even compared to many European cities, Moscow is now quite cool.” 

Outsider’s perspective: How foreign architects are changing Moscow again>>>

Subscribe to get the hand picked best stories every week.

All rights reserved by Rossiyskaya Gazeta.

to our newsletter!

Get the week's best stories straight to your inbox

This website uses cookies. Click here to find out more.