2000 ford excursion seats

  • Order Tracking

Verify Your Part Expand

There are 15 choices.

  • (cloth, manual)
  • (Driver Side)
  • Driver Side
  • Passenger Side

Front Seat for 2000 Ford Excursion

There are 15 choices for the 2000 Ford Excursion Front Seat !!! Choose Your Option

Front Seat

  • damage is due to misuse, abuse, or modification
  • vehicle is converted from private passenger use to commercial, fleet, racing, or other competitive on/off-road recreational settings
  • failure of part is due to collision damage
  • part is installed or operated outside the US
  • failure is due to vehicle use other than as intended or recommended by manufacturer
  • installed heat tab is melted, removed, or modified
  • after 12k miles of use from initial purchase

30-Day Money Back Guarantee : You may return any item in its original condition for a full refund within 30 days of receipt of your shipment, less shipping charges. It typically takes us approximately 3-5 business days to process a credit back to your account and 2-3 business days for the credit to appear on your account.

Replacing Defective Part : If a part is defective, we will replace it 100% FREE.

Return & Cancellation Policy : You can return or cancel your order by contacting our customer service desk. Note all returns and cancellations require a prior authorization.

Terms : All returns and cancellations may be subject to shipping charges, unless caused by our error or cancelled by the customer prior to shipping. No returns without prior authorization from the Supplier (see Contact Us page). You need to contact a customer service representative to arrange for a Return Merchandise Authorization form

Replacements : It is company policy that we receive the original auto part back before sending you a replacement auto part. The original auto part must be returned using the provided shipping label. The shipping cost for both the original and the replacement auto part is a cost attributed to the shipper at hand. Note, if these auto parts are not shipped back to the supplier within 30 days of the delivery date of the replacement part, the buyer's credit card is subject to a recharge for the initial cost of the original auto part (minus the initial shipping cost) If you have any questions about the shipping back of the original part, please contact customer service team Or email [email protected] .

Disclaimer : -Some of our units (used engine, transmission, axle, etc.) may come with wear parts and accessories but are not guaranteed in the sale. They will need to be replaced before installation. Common items that are not guaranteed include but not limited too nuts, bolts, links, seals, bushings, ball joints, brackets, bezels, wiring, cables, sensors and other applicable items depending on the part. If they are not serviceable, such as a pressed-in ball joint, they will be guaranteed. -We cannot guarantee color on any part we sell. The purchased item may need to be repainted, refinished, or reupholstered for proper color match.

Your Source For Used Engines & Transmissions. AllUsedParts, LLc 208 W. 19th Street Kansas City, MO 64108

Technical Questions? Contact the webmaster

  • Terms And Conditions
  • Transmissions
  • Door Mirrors
  • Tail Lights
  • Alternators
  • Engine Computers
  • Rear Driver Shafts

Fraud Notice: We do not sell our parts on third party sites, marketplaces, social media sites, or message boards. If you are approached by anyone claiming to be from allusedparts.com from an external source — be aware. We only sell our products though this website.

© Copyright, 2024: Allusedparts.com. All rights reserved.

  • Shopping Cart 0

2000 Ford Excursion Automotive Seats

Ford Excursion Seats - 2000

Popular Products

WeatherTech® - DigitalFit™ Molded Floor Liners

  • 2000 Ford Excursion Limited
  • 2000 Ford Excursion XLT
  • Ford Excursion Vintage Racing Seats
  • Cool 2000 Ford Excursion Accessories
  • 2000 Ford Excursion Custom Fog Lights
  • 2000 Ford Excursion Lambo Doors Kit For Sale
  • 2000 Ford Excursion Custom Projector Headlights
  • 2000 Ford Excursion Sun Shades

FREE US SHIPPING

Submit search

Free Shipping | Katzkin Coupon | AutoSeatSkins.com Coupons | Katzkin Black Friday

Larger images may be viewed on our Katzkin Color Pages

2000 ford excursion seats

About Katzkin Leather Kits at AutoSeatSkins.com

The #1 name in custom automotive upholstery.

Replacement leather seat upholstery, not seat covers - when it comes to after-market leather interiors, nothing beats the quality and style of Katzkin's ready to install auto upholstery. The leather used in creating Katzkin interiors is top quality, meeting the rigorous standards set by OEMs. Whether you have a cloth interior and you're looking to upgrade, or you want a custom upgrade like two-tone, embroideries, suedezkin, or exotics, Katzkin interiors are sure to impress even the most discriminating owner. Choose from Katzkin Designs, a Manufacturer Inspired Style, or let the experts at AutoSeatSkins.com help you create your own custom look!

We highly recommend ordering Katzkin Color Samples - choose from the more than 60 colors of standard leather, Suedezkin, Tuscany, Outlaw, Barracuda, and Exotics. The kit you are purchasing comes with the leather upholstery for all seats in the vehicle with matching material for headrests, door panels, and arm rests where applicable. AutoSeatSkins.com does not sell leather by the seat or by the row. We do sell the material by the yard for your custom projects. All installation tools are also sold separately.

With over 30 years in leather seat upholstery experience, AutoSeatSkins.com is your source for Katzkin Leather!

AutoSeatSkins is an Authorized Katzkin Dealer

Save 10% Now! + Get Free Shipping On Eligible Orders Over $500

Save 10% Now! + Free Shipping Over $500*

The Seat Shop - Auto Seat Repair with OEM Seat Replacement Covers and Cushions

  • Open media in gallery view

The Seat Shop

2000 - 2001 Ford Excursion Limited Edition, Driver Side Bottom Replacement Original Cushion

SKU: C-EXC-01-FOAM-D

This original cushion may experience some shipping delays from our regular shipping policy due to manufacturing availability.

Couldn't load pickup availability

Product Details

  • Row : Front Row
  • Side : Driver Side
  • Part : Bottom Original Foam
  • Insert type : Solid
  • Seat Style : Bucket Seats
  • SKU : C-EXC-01-FOAM-D
  • Description
  • Install Videos

Product Reviews

Product description, installation videos.

  • Choosing a selection results in a full page refresh.

Ford Truck Enthusiasts Forums

Please register or login to enable Dark Mode.

  • Manage Preferences

2000 ford excursion seats

Forgot your Password?

  •   Ford Truck Enthusiasts Forums
  • Super Duty/Heavy Duty
  • Excursion - King of SUVs

2002 Excursion seats

2000 ford excursion seats

  • 1-888-788-9341
  • Lincoln Parts
  • Mercury Parts
  • Accessories
  • Login/Register
  • Track Order
  • Help Center

FordPartsGiant.com - Genuine Ford Parts

Genuine Ford Excursion Seat Belt

Enter your vehicle info to find more parts and verify fitment.

  • Select Vehicle by VIN
  • Select Vehicle by Model

82 Seat Belts found

Ford Excursion Seat Belt - 1L7Z-7861202-AAA

Ford Excursion Seat Belt Assembly

  • Other Name : Seat Belt Assy
  • Position : Passenger Side
  • Replaced by : 1L7Z-7861202-AAB
  • 2001-2005 Ford Excursion | 10 Cyl 6.8L, 8 Cyl 5.4L, 8 Cyl 6.0L, 8 Cyl 7.3L | 4AT 4R100, 5AT

Ford Excursion Seat Belt - 1C3Z-2561203-BAC

  • Other Name : Seat Belt Assy; Buckle, Latch
  • Position : Driver Side
  • Replaces : 1C3Z-2561203-BAD, 1C3Z-2561203-BAB, 1C3Z-2561203-BAA

Ford Excursion Seat Belt - 1C3Z-2561203-BAA

  • Replaced by : 1C3Z-2561203-BAC

Ford Excursion Seat Belt - 1L7Z-7861202-AAB

  • Replaces : 1L7Z-7861202-AAF, 3C3Z-2561202-AAA, 1L7Z-7861202-AAA, 1L7Z-7861202-AAD, 1L7Z-7861202-AAC

Ford Excursion Seat Belt - 1C3Z-2561203-CAC

  • Replaces : 1C3Z-2561203-CAD

Ford Excursion Seat Belt - 1C3Z-25611B60-AAD

Ford Excursion Belt And Buckle Assembly

  • Other Name : Belt And Buckle Assy
  • Position : Driver Side And Center
  • 2002-2005 Ford Excursion | 10 Cyl 6.8L, 8 Cyl 5.4L, 8 Cyl 6.0L, 8 Cyl 7.3L | 4AT 4R100, 5AT

Ford Excursion Seat Belt - 1C3Z-2561203-CAD

  • Replaced by : 1C3Z-2561203-CAC

Ford Excursion Seat Belt - F81Z-2561203-JJJ

  • Replaces : F81Z-2561203-BBD, F81Z-2561203-GGG, F81Z-2561203-HHH
  • 2000-2001 Ford Excursion | 10 Cyl 6.8L, 8 Cyl 5.4L, 8 Cyl 7.3L | 4AT 4R100

Ford Excursion Seat Belt - 3C3Z-78611B08-AAC

  • Other Name : Seat Belt Assy; Lap & Shoulder Belt, Retractor Assembly
  • Replaces : 3C3Z-78611B08-AAA, 3C3Z-78611B08-AAB
  • 2003-2004 Ford Excursion | 10 Cyl 6.8L, 8 Cyl 5.4L, 8 Cyl 6.0L, 8 Cyl 7.3L | 4AT 4R100, 5AT

Ford Excursion Seat Belt - 2C3Z-25611B60-BAA

Ford Excursion Seat Belt

  • Other Name : Belt And Buckle Assy; Center Seat Belt
  • Position : Center

Ford Excursion Seat Belt - 1C3Z-2561203-CAA

  • Replaces : 3C3Z-2561203-BAB

Ford Excursion Seat Belt - F81Z-2561202-CCC

  • Replaces : 2C4Z-7861202-AAA, F75Z-7861202-AAA, F75Z-7861202-AAC, YC3Z-7861202-AAA, XL1Z-7861202-AAA, YC3Z-7861202-AAB, F81Z-2561202-AAA

Ford Excursion Seat Belt - 1C3Z-25611B60-AAA

  • Replaced by : 1C3Z-25611B60-AAC

Ford Excursion Seat Belt - 1L7Z-7861202-AAD

  • Other Name : Belt And Buckle Assy; Center Seat Belt, Lap Belt
  • Replaces : F81Z-25611B60-FFF, F81Z-25611B60-GGG, F81Z-25611B60-EEE

Ford Excursion Seat Belt - 3C3Z-78611B08-AAB

  • Replaced by : 3C3Z-78611B08-AAC

Ford Excursion Seat Belt - YC3Z-7861202-AAA

  • Replaced by : F81Z-2561202-CCC

Ford Excursion Seat Belt - YC3Z-7861202-AAB

  • 2000 Ford Excursion | 10 Cyl 6.8L, 8 Cyl 5.4L, 8 Cyl 7.3L | 4AT 4R100

Ford Excursion Seat Belt - 5C3Z-78611B09-AAB

  • Replaced by : 6C3Z-78611B09-AAA
  • 2005 Ford Excursion | 10 Cyl 6.8L, 8 Cyl 5.4L, 8 Cyl 6.0L | 4AT 4R100, 5AT

Ford Excursion Seat Belt - 1C3Z-25611B60-AAC

  • Replaces : 1C3Z-25611B60-AAB, 1C3Z-25611B60-AAA

Related Ford Excursion Parts

Window Regulator

Browse by Year

Ford Powerstroke Diesel Forum banner

  • Forum Listing
  • Marketplace
  • Advanced Search
  • Ford 03-07 6.0L Powerstroke Forums
  • 6.0L Ford Excursion Discussion

Excursion seat swaps

  • Add to quote

Anyone here swap their excursion center or rear seats for newer ones? Is this even possible? I know you can swap up to 2015 super duty seats into older 2000's and up. Is this possible with an Excursion. For example, could you stick 2015 rear CC seats into the back of the Excursion?  

2000 ford excursion seats

You can but they aren't a direct bolt it requires some modification.  

2000 ford excursion seats

What makes you want to change them out? I have some 1999-2004 seats that will drop in  

2000 ford excursion seats

White_Buffalo7.3 said: What makes you want to change them out? I have some 1999-2004 seats that will drop in. **** Im looking for a jumper seat to swap out my center console. 2003 EB v10 Click to expand...

I am just curious. I don’t have an excursion but have been considering getting one. I would want head rests for my family. I don’t really like the look of the excursion seats but that’s just me. I actually have a 2001 F250 and plan on swapping all the seats out for some 2015s. Sent from my iPhone using Tapatalk  

aheich86 said: I am just curious. I don’t have an excursion but have been considering getting one. I would want head rests for my family. Click to expand...

2000 ford excursion seats

I would love to upgrade my 3rd row bench seat.  

I have no idea if it would or not just thinking and I may research this at a later date but an expedition middle seat may fit the third row.  

  • ?            
  • 267.7K members

Top Contributors this Month

2000 ford excursion seats

Create a Website Account - Manage notification subscriptions, save form progress and more.   

  • Website Sign In

Click to home

City Council

Regular meetings.

  • 1st and 3rd Mondays of every month
  • City Hall Council Chambers 206 E 3rd Street Moscow, ID 83843

Group 2024

Agendas & Minutes

Agendas are available prior to the meetings. Minutes are available following approval. View Most Recent Agendas and Minutes

Meeting Videos

Videos of City Council meetings are available on the City of Moscow's YouTube channel .

Sandra Kelly

Sandra 2024

Bryce Blankenship

Bryce 2024

Hailey Lewis

Hailey 2024

Julia Parker

Julia 2024

Gina Taruscio

Gina 2024

Moscow has a Council-Mayor form of government consisting of six at-large (serving the community as a whole rather than representing a subdivision of the community) Council members and a Mayor. These positions are elected separately and serve four-year terms. The Council elects a President and Vice-President from among its members at its first meeting in January each year. These two officers may stand in for the mayor as necessary.

The Council is the legislative and judicial arm of Moscow's City government; enacting ordinances and resolutions. This body confirms the Mayor's appointments of City officials including department heads, and the City Supervisor, as well as commission members. The Council approves the City's annual budget and serves as the convening body for public hearings and appeals of other City Boards and Commissions.

Submit Issues to the Council

To formally begin the process, contact the City Supervisor , a Council member , or the Mayor directly. Topics are routinely discussed by elected officials and staff and are either resolved or managed, if appropriate, using existing City policies and procedures. If the issue requires discussion and direction by the Council it is scheduled for presentation at a Council Committee meeting. Council Committees are the work groups that review agenda topics to either request additional information or research from City staff or commissions, or forward on those items for discussion and consideration by the full Council. Due to meeting schedules, most issues take at least 6 weeks to reach a full City Council meeting.

For more information on the City Council or Committee meetings, please email Laurie M. Hopkins , City Clerk, or call her at 208-883-7015.

Council Issue Timeframe

Pullman Radio

  • [ April 30, 2024 ] UI Looking To Expand Campus Housing To Accommodate Growing Student Population News
  • [ April 30, 2024 ] Spring Chinook Salmon Fishing Opens Next Week On Snake River In Washington News
  • [ April 30, 2024 ] Today Last Day For Studded Snow Tire Season In Idaho News
  • [ April 30, 2024 ] LISTEN: Morning News Interview With Developer Of Controversial Windfarm Proposed For Near Kamiak Butte Morning News Podcast
  • [ April 29, 2024 ] Whitman County Commissioners Express Concerns Regarding Wind Farm Moratorium News

Six Candidates Now Running For Three Moscow City Council Seats-Friday Last Day For Candidate Filing In Idaho

September 7, 2023 Evan Ellis News

Friday is the last day for candidate filing in Idaho for seats up for a vote this fall.

The race for Moscow City Council seats is getting more crowded as two candidates filed on Thursday.  Incumbent Drew Davis filed for re-election and Evan Holmes filed for a seat.  There are three Moscow City Council seats up for election in November.  Incumbent Sandra Kelly is running for re-election.  Bryce Blankenship, Joe Campbell and Nathan Tupper are also running for a seat.  The top three vote getters will earn seats on Moscow City Council.  One of the posts up for election is currently held by Maureen Laflin.

Elsewhere in Latah County Genesee Mayor John Hermann has filed for re-election.

There are dozens of small taxing district seats up for a vote this fall locally in Idaho.  No candidates have filed yet for mayor in Bovill, Deary, Onaway, Potlatch and Troy.  Positions up for a vote include school boards, city council seats, fire district commissions, parks and recreation district boards and cemetery boards.  Candidate filing is done with each small taxing district office.

  • Daily Deals
  • Brand Outlet
  • Help & Contact
  • Watchlist Expand Watch List Loading... Sign in to see your user information
  • Recently Viewed
  • Bids/Offers
  • Purchase History
  • Saved Searches
  • Saved Sellers
  • Collection beta
  • The eBay vault
  • Notification
  • Expand Cart Loading... Something went wrong. View cart for details.

There seems to be a problem serving the request at this time

Seats for 2000 Ford Expedition

Find parts that fit, we need more information about your vehicle to confirm fit..

  • Time: ending soonest
  • Time: newly listed
  • Price + Shipping: lowest first
  • Price + Shipping: highest first
  • Distance: nearest first
  • Gallery View

831 Results

  • Placement on Vehicle
  • All Listings filter applied
  • All Filters

2000, 2001 Ford Expedition Eddie Bauer Driver Lean Back Leather Seat Cover Tan (Fits: 2000 Ford Expedition)

2000 ford expedition eddie bauer xlt driver bottom leatherette seat cover gray (fits: 2000 ford expedition), 2000-2001 ford expedition eddie bauer lean back driver side vinyl tan color, 2000 ford expedition eddie bauer driver bottom leather seat cover parchment tan (fits: 2000 ford expedition), beige pu leather car front seat cushion pad interior universal for car truck usa (fits: 2000 ford expedition), car seat covers front & rear full coverage black luxury pu leather universal usa (fits: 2000 ford expedition), passenger front seat bucket captain chair leather fits 00-02 expedition 183864 (fits: 2000 ford expedition), 1997 1998 1999 2000 2001 2002 ford expedition top lean back seat cover in tan (fits: 2000 ford expedition), fits ford expedition1997 1998 1999 2000 2001 2002 driver bottom seat cover tan (fits: 2000 ford expedition), fit 1997-02 ford expedition eddie bauer syn leather driver bottom seat cover tan (fits: 2000 ford expedition), driver front seat bucket captain chair cloth fits 00-02 expedition 382767 (fits: 2000 ford expedition), for 1997-02 ford excursion eddie bauer driver bottom replacement seat cover tan (fits: 2000 ford expedition).

  • Sellers with highest buyer ratings
  • Returns, money back
  • Ships in a business day with tracking

Fits 1997-2002 Ford Expedition Synthetic Leather Driver Bottom Seat Cover Tan (Fits: 2000 Ford Expedition)

2000-2002 ford expedition eddie bauer passenger bottom leather seat cover tan (fits: 2000 ford expedition), 2000, 2001 ford expedition eddie bauer driver lean back vinyl seat cover tan (fits: 2000 ford expedition), 2000 2001 ford expedition eddie bauer -driver side bottom leather seat cover tan (fits: 2000 ford expedition), automotive black front seat covers protector cloth for ford expedition ab (fits: 2000 ford expedition), 1999 2000 ford expedition xlt driver bottom leather seat cover gray (fits: 2000 ford expedition), power seat switch fit for ford f150 f250 f350 ford expedition excursion explorer (fits: 2000 ford expedition), 2000 2001 2002 ford expedition eddie bauer driver bottom leather seat cover tan (fits: 2000 ford expedition), 1998-2002 oem ford expedition & f-150 6-way power driver seat track |w567 (fits: 2000 ford expedition), 1998 1999 2000 2001 ford expedition driver side bottom leather seat cover tan (fits: 2000 ford expedition), 2000-2002 ford expedition headrest head rest rear seat tan ngtrd (fits: 2000 ford expedition), for 1997-2002 ford excursion xlt front bottom driver side leather seat cover tan (fits: 2000 ford expedition), new oem 2000 ford expedition navigator front left driver seat lumbar adjuster (fits: 2000 ford expedition), 1998-2002 ford expedition lh left driver power seat rail track oem, 98 99 00 01 02 ford expedition eddie bauer memory power seat track driver lh (fits: 2000 ford expedition), 98 99 00 01 02 ford expedition power seat track driver lh (fits: 2000 ford expedition), 2000 ford expedition eddie bauer xlt -driver side bottom leather seat cover gray (fits: 2000 ford expedition), 2000 ford expedition eddie bauer -passenger side bottom leather seat cover tan (fits: 2000 ford expedition), 2000 ford expedition driver side lean back leather seat cover gry (fits: 2000 ford expedition), 2000-2002 ford expedition eddie bauer, xlt passenger bottom vinyl seat cover tan (fits: 2000 ford expedition), 97 98 99 00 01 ford expedition eddie bauer driver bottom leather seat cover gray (fits: 2000 ford expedition), 1998-2002 oem ford expedition & f-150 6-way power driver seat track |x376 (fits: 2000 ford expedition), 98 99 00 01 02 ford expedition power seat conversion kit passenger rh (fits: 2000 ford expedition), for 97-02 ford excursion eddie bauer front driver bottom leather seat cover tan (fits: 2000 ford expedition), 98 99 00 01 02 ford expedition eddie bauer power seat track driver lh (fits: 2000 ford expedition), 97 98 99 ford expedition driver side bottom vinyl seat cover prairie tan (fits: 2000 ford expedition), 2000 ford expedition rims lifted lift kit -driver bottom leather seat cover tan (fits: 2000 ford expedition), 2000 ford expedition xlt sport utility driver lean back leather seat cover tan (fits: 2000 ford expedition), 2000 to 2002 ford expedition eddie bauer xlt, 2wd driver armrest cover tan (fits: 2000 ford expedition), 2000 2001 2002 ford expedition eddie bauer xlt driver side armrest cover gray (fits: 2000 ford expedition), 1997-1999 ford expedition passenger bottom vinyl seat cover medium prairie tan (fits: 2000 ford expedition), for 97-02 ford excursion xlt front driver bottom replacement seat cover med tan (fits: 2000 ford expedition), 2000 2001 2002 ford expedition eddie bauer driver bottom leather seat cover gray (fits: 2000 ford expedition), for 1997-2002 ford excursion eddie bauer driver bottom leather seat cover tan (fits: 2000 ford expedition), 2000, 2001, 2002 ford expedition eddie bauer xlt driver side armrest cover tan (fits: 2000 ford expedition), 1999 2000 ford expedition -- eddie bauer passenger bottom leather seat cover tan (fits: 2000 ford expedition), 2000 2001 2002 ford expedition driver lean back vinyl seat cover parchment tan (fits: 2000 ford expedition), driver side replacement bottom seat cover leather tan for 97-02 ford excursion (fits: 2000 ford expedition), 98 99 00 01 02 ford expedition heated power seat conversion kit passenger rh (fits: 2000 ford expedition), for ford excursion eddie bauer 1997-2002 left front driver bottom seat cover tan (fits: 2000 ford expedition), for 1997-02 ford excursion xlt driver bottom leather replacement seat cover tan (fits: 2000 ford expedition), driver side bottom leather seat cover 02 compatible with ford expedition eddie (fits: 2000 ford expedition), 97 compatible with ford expedition eddie driver side bottom vinyl seat cover (fits: 2000 ford expedition), for 1997-2002 ford excursion driver bottom leather seat cover med parchment tan (fits: 2000 ford expedition), for 1997-02 ford excursion eddie bauer xlt driver bottom leather seat cover tan (fits: 2000 ford expedition), 1997 1998 1999 ford expedition eddie bauer driver bottom leather seat cover tan (fits: 2000 ford expedition), 1997-1999 2000 ford expedition passenger side lean back leather seat cover gray (fits: 2000 ford expedition), 2000 ford expedition xlt driver bottom leather perforated vinyl seat cover gray (fits: 2000 ford expedition).

  • Classifieds
  • Real Estate
  • Manage Your Account
  • Saved items

Lapwai, ID (83501)

Showers early then scattered thunderstorms developing later in the day. High 54F. Winds W at 5 to 10 mph. Chance of rain 50%..

Considerable cloudiness. A few flurries or snow showers possible. Low 38F. Winds light and variable.

Updated: April 30, 2024 @ 1:46 am

  • Full Forecast
  • Copy article link

Sandra Kelly

Bryce Blankenship

Joe Campbell

Evan Holmes

Nathan Tupper

  • Liesbeth Powers/Daily News

In Moscow, six vying for three city council seats

Incumbents going against four aspiring newcomers.

  • By Anthony Kuipers, for the Tribune
  • Oct 31, 2023
  • Oct 31, 2023 Updated Oct 31, 2023

Three Moscow City Council seats are open for election this fall and six candidates are asking for the public’s vote.

Sandra Kelly and Drew Davis are the incumbents hoping to continue representing Moscow residents. They are competing against Bryce Blankenship, Joe Campbell, Evan Holmes and Nathan Tupper. Residents will be asked to vote for three candidates at the polls Nov. 7.

The Lewiston Tribune and Moscow-Pullman Daily News sent all of them a questionnaire to let them share details about themselves and their perspectives on the future of Moscow. All but Tupper replied.

Why did you decide to run for office?

Moscow is a community where people can thrive and feel connected to others and the land of the Palouse in meaningful and intentional ways. And it is for these continued connections, both past and present, that I hope to represent our community on the City Council. I’ve wanted to continue to invest in this town that has given me so much, and I am excited to give back by offering my unique perspective and skillset on Council.

What unique qualities would you bring to the table as a city councilor?

My skillset as a philosopher and educator make me well-positioned to be an effective and encompassing City Councilor. I pride myself on being an intentional listener and learner — being patient and effective when it comes to decision-making and communicating those decisions effectively. As a senior instructor at the University of Idaho, I believe I am in a unique position to act as a conduit between students, faculty and the city. I will intentionally help grow the relationship between the University of Idaho and the city and be an active voice in various pockets throughout the community.

What are the most pressing issues Moscow needs to address?

The city must think about how to manage growth and development in sustainable, effective, and thoughtful ways. This means paying close attention to decisions surrounding fair and affordable housing, access to water, and various infrastructure issues. I will prioritize solution-based water management from insights and guidance from organizations like the Palouse Basin Aquifer Committee. I will focus on data-driven metrics to help inform how to plan sustainably for the future. Additionally, I hope to be passionate about preserving and fostering the depth of our community connections —celebrating our unique intergenerational collective that makes Moscow so special.

If elected, what do you hope to accomplish by the end of your first term?

First, I will always advocate for the city — I will be an effective and thoughtful voice as we are mindful of the present but look to the future. I will strengthen the partnership and relationship between the city and the university. I will support small businesses throughout the community and be active and intentional in the decision-making processes of issues listed in the question above. Lastly, I aim to bring people together and celebrate diverse viewpoints and perspectives in all corners of our town — all of which will contribute to moving Moscow forward.

I’ve always had an interest in politics and community service. Growing up, my family spent much of the time below the poverty level. Toward the end of my teaching career I developed an interest in political theory, viewing the concept of liberty in broad and varied ways.

Our life choices are a function of our abilities and our opportunities, but not all opportunities are equal. I want to help create opportunities in education, housing, transportation and health care. Equality of opportunity helps citizens become self-sufficient, and self-sufficiency makes for a better democracy.

I’ve had a successful, fortunate, and diverse life. Growing up in a single-parent household, with a wheelchair-bound sister, I went to high school in a town that was 40% Jewish, and graduated from a college that was 40% Black. While earning degrees, I waited tables, made deliveries and washed dishes. I eventually earned teaching awards, and I’m editing my 10th book.

I appreciate complex problems and diverse points of view. My experience organizing forums will be put to use. I can help Moscow have the important conversations we need to have to have the future we want to have.

According to the Climate Action Plan, we need to reduce emissions by over 50% by 2035, obtaining net-zero emissions by 2050. Transportation is the third-largest sector in the plan. To reduce emissions, we need increased options in public transportation and active transportation such as walking and cycling. Public transportation is a Catch-22 since as transportation options increase usage will grow but we need usage to grow in order for transportation options to increase. To begin, we need to familiarize people with existing public transit options and seek input about which options they would use if given the choice.

Our progress on transportation in four years will be a gauge for progress toward net-zero emissions. One goal of the CAP is to encourage employers to develop alternative transportation incentives. For our efforts to be sustainable we need to work with businesses and developers. Business and homes need to be close for walkability and rideability to be options. Working together as a community, there are multiple ways to incentivize transportation options. I retired last spring as a professor after teaching 26 years at WSU. I have a unique ability to use my experience in academia for the benefit of our community.

In December 2022 I was appointed by Mayor (Art) Bettge to the City Council because of my professional background on planning and zoning, infrastructure, water planning and architecture. I decided to run again because I believe my perspective paired with my professional background is still needed on the Council.

I work in the western United States in several different cities where I get to see firsthand how they operate, and I’d like to be able to take the lessons learned and apply them back to our city here in Moscow.

Currently I’m the only one on the Council and candidate running who has a young family. The perspective of a young family is needed in our city when making decisions. We have incredible amenities and services for our residents such as recreation facilities and the parks, pathways, and rec programs. I always want to represent the young family perspective on issues and decision making. Moscow is a great place to raise a family, I want to ensure for years to come.

Frequently important matters are brought before the City Council that aren’t in the city council’s jurisdiction. I would like to have meetings and information sessions that are recorded and written information that helps instruct citizens what City Council does have jurisdiction over.

Refresher class of local, county and state government responsibilities. I could see this being an hour’s class twice a year where citizens could attend and be informed of the best path to resolve problems issues they see. I think this would be best if the class was taught by members of council, county and state elected official. Citizens could interact more effectively with the elected officials.

If elected, what do you hope to accomplish by the end of your first full term?

I want to start a housing submit for the Palouse like the water summit. This would educate the public and bring different stakeholders such as financial institutions, universities, the city’s contractors, engineers, architects together to proposed solutions for our city. This would allow us to find alternatives for our city and region

Gratitude motivates me to run for office. For more than 30 years I’ve observed and participated in the machinery that runs Moscow. I’m winding down my contracting business, and now have time to use my accumulated knowledge and skills as part of a team of people who share my desire to make this the best place possible. I know the reward of public service from many years working for the National Park Service. In Moscow, Nancy and I learned the real value of community as we raised kids, operated businesses, volunteered where needed, and embraced its pace and quality of life.

— My business management experience, especially an understanding of contracts, budgets, deliverables, and timelines.

— My participation, over the past 30 years, in local public hearings (e.g., annual city budget), workshops (e.g., Moscow’s Comprehensive Plan), community organizations (e.g., Moscow Food Co-op), government boards (e.g., Zoning Board of Adjustment) and attendance at more than 200 city council meetings.

— My wife Nancy’s perspective, as a UI alum with expertise in public surveys and program evaluation; founder/owner of Beginning With Music; past member of ACMS and other boards; current member of Moscow Interfaith Association; and recent retiree from UI’s Office of Research and Economic Development.

— The short-term ripple effects stemming from a diminishing pool of affordable housing for rent or purchase: workforce pressures, food insecurity, transportation shortcomings, childcare deficits and deferred health maintenance are some effects that immediately come to mind.

— Measurable steps toward a permanent solution to our water supply issue.

— The 2025 budget will be a challenge. Taxes, fees, programs, revenues, needs, planning, etc., will require close examination, evaluation, and prioritization.

— “We,” not I, will have a road map for resolving the water dilemma, including a funding budget and timeline. Long-term development, property values, business planning, revenue structure, etc. are compromised by this uncertainty.

— “We,” not I, will have identified land and initiated a process for zoning, platting and preliminary design for residential development that allows smaller lot sizes for single-story starter homes and/or manufactured home installations.

— “We,” not I, will have forged stronger two-way dialogues with taxpayers, businesses, and overlooked/underserved populations, using creative social media approaches; a bolstered public input process at government hearings/meetings; and greater outreach to community organizations and neighborhood associations.

Four years ago, I decided to run for City Council because I wanted to take a bigger step into community service. At that time (2019), I had been with Palouse-Clearwater Environmental Institute (PCEI) for four years, had immersed myself into the nonprofit world, and wanted more. At the time I was a member of the City of Moscow Historic Preservation Commission, the City Human Rights Commission, President of the board for the 1912 Center, Heart of the Arts, an active leader in the League of Women Voters, on the board of the Humane Society of the Palouse, the film committee chairperson for the Kenworthy, a docent and volunteer with the Latah County Historical Society, and on the leadership team for the Alternative Giving Market of the Palouse (AGMP). I may be leaving things out, but you can see, it’s a lengthy list. I was also active on the Moscow Nonprofit Roundtable group, which all allowed me to be very active within the Moscow community. The next natural step, at least to me, was the run for City Council.

I was fortunate to be elected, and my reasons for wanting to continue to serve are much the same.

I am still very active in the community. I left PCEI and went to work at Washington State University for the Center for Civic Engagement where I was the community programs coordinator and I helped create the Cougar Food Pantry. I worked there for two years, and when a similar position at the University of Idaho emerged, I jumped at the chance to work for the best land-grant university in the world. I am now the coordinator for the volunteer and civic action programs at the University of Idaho and I run the Vandal Food Pantry.

I continue to serve in many capacities in Moscow. In addition to being a liaison for several city commissions, I am on the Palouse Basin Aquifer Committee, on the board of directors for Inland Oasis, on the board for the Latah County Human Rights Task Force (though due to some scheduling conflicts, I may have to take on a nonvoting status there), I continue to serve on the AGMP leadership team, I am still a member of the League of Women Voters, and I am on the board of directors for the Latah County Historical Society. I served as President of the Council and as chairperson of the Public Works and Finance committee.

I have the capacity, knowledge and desire to serve, and that is why I want to continue serving as a city councilor.

As mentioned before, I have served in various leadership and board positions, and I have a 20+ year career as a journalist. These experiences have allowed me to not only hone my listening skills, but I know how to work with, and listen to, and help a variety of people. I am not afraid of hard work and long hours, and my only goal is to help our community members and to help our beautiful, eclectic city grow and prosper.

We certainly are struggling with affordable housing. This is not a unique problem in our state, or even in our country, but it is a real and growing problem.

Water is an issue, and while PBAC is celebrating its 20th year as an organization and has worked diligently to come up with long-term solutions to our shrinking aquifer, we must continue to seek alternatives to water conservation, and for that matter, to climate issues other than water. I think there are workable water plans that we can build on, but we must continue to focus on water and be able to move forward, but also pivot, if need be.

In terms of climate change, the city has been working with a focus for years on building a workable and robust climate action plan, and we are committed to battling climate change. I am proud of the work our climate team has put in and I value their insights and suggestions.

Always at issue is making sure we have the city resources to help our citizens. We have a comprehensive plan that we continue to update and implement, and we must continue to work within our means to make sure we have the structures, equipment and facilities to help our city and our citizens have a safe and healthy place to call home.

If elected, what do you hope to accomplish by the end of your next term?

This is an awkward question. I don’t have an agenda that states, “if elected I will …” and then have a list of things I want to implement and accomplish. The simple answer is I hope that by the end of my next term the city is continuing to maintain its streets, sewers, growth and management within budget, and in such a way people are happy and thriving in our town. I will work tirelessly to make this happen.

Naturally, to do this we must make sure the city is living within its means. We must make sure our growth is reasonable yet meeting the demands of people. I hope that in four years we have made a recognizable dent regarding affordable housing, and that people are not as stressed about housing. However, much of that depends on the Idaho Legislature, too. I hope that we are making strides in water conservation and carbon emissions, and I hope our downtown is thriving and diverse.

The Moscow-Pullman Daily News sent all of them a questionnaire to let them share details about themselves and their perspectives on the future of Moscow. Tupper did not reply.

Kuipers can be reached at [email protected] .

  • The Economy
  • School Systems
  • Transportation
  • Business And Commercial Law
  • Computer Science
  • Construction Industry

Sign Up For a Tribune Newsletter

  • Daily Headlines
  • Daily Obituaries
  • Business News
  • Weekly Refresh (General Interest)
  • Local Deals and Promotions

Income opportunity

Deliver the Tribune

Event calendar

The region's best source for events, arts, culture ... everything.

Tribune archives

Digital archives: 1877 to present

Breaking news text alerts

Text LMT to 55678 to receive breaking news alerts/links to your phone. Message and data rates may apply. Text STOP to stop.

Online Poll

How are you following the trump hush money trial.

Sorry , an error occurred.

Account processing issue - the email address may already exist

Sign up with

You're all set!

Thank you .

Your account has been registered, and you are now logged in.

Check your email for details.

Invalid password or account does not exist

Sign in with

Reset Password

Submitting this form below will send a message to your email with a link to change your password.

Forgot Password

An email message containing instructions on how to reset your password has been sent to the email address listed on your account.

Email me a log in link

Promotional offers.

No promotional rates found.

Purchase Gift Purchase Access

Secure & Encrypted

Secure transaction. Secure transaction. Cancel anytime.

Your gift purchase was successful! Your purchase was successful, and you are now logged in.

A receipt was sent to your email.

An error occurred

IMAGES

  1. 2000 Ford Excursion Limited 4dr 4WD 3rd Row Seats 110,XXXMiles V10 Eng

    2000 ford excursion seats

  2. Ford Excursion FAQ Review (2000-2005)

    2000 ford excursion seats

  3. 2000 Ford Excursion Limited 4dr 4WD 3rd Row Seats 110,XXXMiles V10 Eng

    2000 ford excursion seats

  4. 2000 Ford Excursion Limited 4dr 4WD 3rd Row Seats 110,XXXMiles V10 Eng

    2000 ford excursion seats

  5. 2000 Ford Excursion Limited 4dr 4WD 3rd Row Seats 110,XXXMiles V10 Eng

    2000 ford excursion seats

  6. 2000 Ford Excursion Limited 4dr 4WD 3rd Row Seats 110,XXXMiles V10 Eng

    2000 ford excursion seats

VIDEO

  1. 2000 Ford excursion

  2. 2000 Ford Excursion 4x4 Rough Country dual steering stabilizer install & review. F250, F350 V10 6.8

  3. 2000 Ford Excursion satisfying before and after #autodetailing 

  4. 2000 Ford Excursion 329,000 Miles Rev

  5. 2000 Ford Excursion

  6. 2000 Ford Excursion Payload Capacity Broken Down

COMMENTS

  1. Seats for 2000 Ford Excursion for sale

    For 2000 2001 Ford Excursion Limited Front Leather Seat Cover Tan (Fits: 2000 Ford Excursion) Brand New. $133.18. Top Rated Plus. Was: $140.19. or Best Offer. Free shipping.

  2. Genuine OEM Seats for Ford Excursion for sale

    For 2000 2001 Ford Excursion Limited Passenger Lean Back Leather Seat Cover Gray (Fits: Ford Excursion) Brand New: Seat. $199.99. Was: $209.99. or Best Offer. Free shipping.

  3. 1999-2005 Ford Excursion Custom Real Leather Seat Covers (Front)

    Ford. 1999-2005 Ford Excursion Front leather seat covers are manufactured using superior cow leather. These seats are primarily used as replacements for the factory seats cover. If you are looking to replace new seats cover on your car, then you will need to remove the old cover first. The installation does not require any additional sewing.

  4. 2000 Ford Excursion Ford OEM Seats

    Genuine OEM Ford part made to fit your vehicle perfectly Designed to restore OEM performance for a safe ride. $41.50 - $515.41. Ford OE Restraint Systems - Front Seat Belts (40/20/40 Bench Seat) 0. # 2459749132. Ford Excursion 2000, Restraint Systems - Front Seat Belts (40/20/40 Bench Seat) by Ford OE. If you want to keep your Ford performing ...

  5. Used Front Seats for 2000 Ford Excursion

    This is an original used OEM Front Seat that's guaranteed to fit a 2000 Ford Excursion with the applicable vehicle manufacturer's specifications (). LIMITED, 6DR, 56, TAN, LEA BUCKET, CAPTAINS, LTHR, MAN, R. Buy in monthly payments with Affirm on orders over $50.

  6. 2000 Ford Excursion Seats

    Ford Excursion 2000, CPA1011 Series Carbon Fiber Racing Seats by Cipher Auto®. Seat Quantity: Pair. Includes: Driver/Passenger Side Seats, Single-lock Sliders. Cover Color: Black and Gray. Cover Material: Carbon Fiber. Shell Type:... $399.00 Save: 5%. $379.05.

  7. 2000 FORD EXCURSION Seats

    Find 2000 FORD EXCURSION Seats and get Free Shipping on Orders Over $109 at Summit Racing! $5 Off Your $100 Mobile App Purchase - Get the App. ... 2000 FORD EXCURSION Individual Parts. Part Groups. Results 1 - 25 of 135 25 Records Per Page Default Sort . WeatherTech Seat Protectors SPB002CH ...

  8. 2000 Ford Excursion Parts

    Procar Rally Bucket Seats with Headrests; Black Vinyl. 0.0. (0) MSRP $978.99 pr. Classic $889.99 pr. VIEW DETAILS. Classic Industries offers a wide selection of Seats for your 2000 Ford Excursion. Classic Industries offers 2000 Ford Excursion Custom Seat Packages.

  9. Ford Excursion Katzkin Leather Seats, 2000, 2001 (2 passenger front

    Buy a Katzkin Leather seat kit for your Ford Excursion and replace your worn upholstery. FREE SHIPPING. Shop online or Call 888-500-5133 TODAY! (YFO80) ... 2000 - 2001 Ford Excursion Katzkin Leather Upholstery Kit (fits 2 passenger front seat) (3 row set) Katzkin Photo Not Available :

  10. Genuine Ford Excursion Seat Cushion

    Shop wholesale-priced OEM Ford Excursion Seat Cushions at FordPartsGiant.com. All fit 2000-2005 Ford Excursion and more. ... 2000 Ford Excursion | 10 Cyl 6.8L, 8 Cyl 5.4L, 8 Cyl 7.3L | 4AT 4R100; Less Info. View related parts. Ford Excursion Seat Cushion Pad. Part Number: YC3Z-78632A23-BA.

  11. 2000 2001 Ford Excursion Limited Leather Seat Cover Replacement, Ford

    2000 2001 Ford Excursion Leather & Synthetic Leather Seat Cover This is a variant item & you can choose your position, side, & material. Our colors are original factory colors. Please check the 3-digit trim color code on the sticker inside your Glove Box to choose the correct color for your car (Bottom right number).

  12. 2000

    The Seat Shop. 2000 - 2001 Ford Excursion Limited Edition, Driver Side Bottom Replacement Original Cushion SKU: C-EXC-01-FOAM-D. In Stock. Regular price $151.99 USD Regular price Sale price $151.99 USD Unit price / per Sale Out of stock Exception. This original cushion may experience some shipping delays from our regular shipping policy due to ...

  13. 2002 Excursion seats

    Likes: 21. Received 14 Likes on 8 Posts. 11'-16' seats will fit in front and are significantly more comfortable than the stock seats. Super Duty variants are a direct fit, but will need to be wired in. F-150 variants are slightly smaller (better fit for those under 225lbs), and will fit with seat base modification.

  14. Genuine Ford Excursion Seat Belt

    Shop wholesale-priced OEM Ford Excursion Seat Belts at FordPartsGiant.com. All fit 2000-2005 Ford Excursion and more. ... 2000 Ford Excursion | 10 Cyl 6.8L, 8 Cyl 5.4L, 8 Cyl 7.3L | 4AT 4R100; Less Info. View related parts. Ford Excursion Seat Belt Assembly. Part Number: 5C3Z-78611B09-AAB.

  15. Excursion seat swaps

    I have some 1999-2004 seats that will drop in. 250/100s, Carillo rods, Delipped Pistons, Stage 2 Colt cam, ARP Studs, KC38R, CNC Fab Stg 2 HPOP, Sump, Walbro, AFE BHAF,Full billet transmission, Leveled, 4'' straight to 7'' tip, 08 mirrors, 6.0 front end ect... 250/100s at 205k. windowed block at 207k. Share.

  16. City Council

    Regular Meetings. 7 p.m. 1st and 3rd Mondays of every month. City Hall Council Chambers. 206 E 3rd Street. Moscow, ID 83843.

  17. Six Candidates Now Running For Three Moscow City Council Seats-Friday

    There are three Moscow City Council seats up for election in November. Incumbent Sandra Kelly is running for re-election. Bryce Blankenship, Joe Campbell and Nathan Tupper are also running for a seat. The top three vote getters will earn seats on Moscow City Council. One of the posts up for election is currently held by Maureen Laflin.

  18. Seats for 2000 Ford Expedition for sale

    Universal Recline Black Racing Seat + Dual Slider Yellow Plaid Buckle Belt x2 (Fits: 2000 Ford Expedition) Brand New. $399.99. Was: $531.00. or Best Offer. Free shipping. 29 watching.

  19. In Moscow, six vying for three city council seats

    In Moscow, six vying for three city council seats Incumbents going against four aspiring newcomers. By Anthony Kuipers, for the Tribune; Oct 31, 2023 Oct 31, 2023 Updated Oct 31, 2023;

  20. About Us

    Moscow City Symphony "Russian Philharmonic" is one and only official orchestra of the Moscow Government, deservedly won the love of Muscovites, Russians, and became a world famous music brand. Critics note the special energetics of the orchestra concerts, which does not leave anyone indifferent among thousands of listeners of all ages.