2009 dodge journey rear suspension diagram

• Forum Listing
• Marketplace
• Advanced Search
• Dodge Truck, SUV and Van Forums
• Dodge Ram Truck 4th Gen (09 – 19) Forums
• 4G Dodge RAM - General Talk

Rear Suspension, Axle, and Differential Diagram

• Add to quote

What cha doing with it?  

Looking at a cheaper way to replace the entire back end with either 3.92 or 4.10 gears with the mopar LSD from a salvage yard. I just needed to know what I need to get so I don't end up getting screwed. It's about half the price, but haven't decided if I want to go this route yet.  

Unless it is coming out of an '09, you are going to have to fab all the brackets for the rear suspension.  

no questions about it. it MUST be out of a 09' or 10'.  

That's what was suggested by the dealer parts guy if I wanted a cheaper option then spending $1,800+. Go find a '09 or '10 that had only front end damage that was considered wrecked. I know I can pick it all up for $1,200 from a discount parts area but can't beat same parts for $600. Now to wonder if the 12k or 12 month warranty is worth the extra cost.  

where did you find it for 1200  

http://www.trademotion.com/partlocator/index.cfm?action=getJointLocator&siteid=214996&chapter=&sectionids=23,0&groupid=10047&subgroupid=60083&make=8&model=Ram%201500&year=2009&catalogid=1&displayCatalogid=0  

Depending on how hard of an impact, the crush collar that locates the pinion gear could also be damaged. Make sure when you look at the junk yard rear, that you give the pinion a good tug to see if there is any play.  

There's no way it should cost that much to re-gear even with an LSD. Call some local offroad shops and see what they would charge. I had my Grand Cherokee regeared front and rear with an LSD in the front for $800. That included the gears and install kits.  

How long ago was that?I will call arround here local but I bet it is over 1k without the parts.  

It was about 3 years ago, but R&P sets haven't gone up that much. Dealer's will rob you for re-gearing, but offroad shops do it pretty routinely and are really good at it.  

Ya my dealer wants 5k to do the gear swap on my truck for 4.56's.There is noway I will let them touch it for that price.  

Hell I'm getting my rear gear swap "Done Dirt Cheap!" I'm getting a brand new Detroit True Trac for $320 from a friend, a brand new set of Motive 4.56's with master install kit for $140 shipped and the install itself for $250 from a friends gear shop. Not bad for a high performance upgrade from my weak sauce 3.21 open diff combo.  

Wow that is awesome!!! Hook me up bro!! :rck:  

2500 better cover it! LOL, thats nuts  

I will call Chux today and see what place they use.I hope it is't that high but I was just saying the high side would be around 2500.00.I hope not though lol.  

It was mentioned that for us with the 3.21 gears, it's not as simple as replacing the gears and the Diff., the trucks just have a dinky back end with those tiny 3.21 gears. That's why I was looking at swapping out the entire back end. I'm kind of dumb to the way of gears but it seemed a safe bet to do an entire swap.  

I wonder if the carrier is a different size for the 3.21 and 4.11, that could be what he is talking about... any reputable rear end service should have no problem doing it, I paid $600 per axle when I put junkyard dana 44's on my jeep, and that was with ox lockers (a real pita to install).....It really shouldnt cost you more than $600... the only problem I see with the 9.25 is the c-clips, but they are pleanty strong for what these trucks are being used for...I'd say just do the re-gear, and if it requires the next size carrier get an aftermarket LSD....  

??Dinky back end?? Huh? The chrysler 9.25 tear axle is plenty strong. Thats why they've been using it virtually untouched for over 30 years. As for the gear swap its not that big of a deal and shouldn't cost more then $350 for the labor on a 2wd truck.  

You would know better than me. When I brought it up at the dealership they mentioned that it wasn't as easy as replacing the gears and the differential. It took more work than that, but then again it is the dealership.  

My truck is getting the 4.56's and DTT installed as we speak. As far as i or the installer is concerned it's the same as a 02-08.  

• ?            
• 291.5K members

Top Contributors this Month

• Dodge Manuals
• 2009 Journey
• Owner's manual

Dodge JOURNEY 2009 Owner's Manual

• Owner's manual (523 pages)
• Features manual (9 pages)
• Quick reference manual (6 pages)
• page of 523 Go / 523

Table of Contents

• Troubleshooting

Things to Know before Starting Your Vehicle

• Introduction 3
• How to Use this Manual
• Introduction
• Vehicle Identification Number
• Warnings and Cautions
• Vehicle Modifications/Alterations
• Wireless Ignition Node (WIN)
• FOB with Integrated Key
• Tip Start Feature
• Ignition Key Removal
• Key-In-Ignition Reminder
• Things to Know before Starting Your Vehicle 9
• Replacement Keys
• Customer Key Programming
• General Information
• Rearming of the System
• To Arm the System
• To Disarm the System
• Illuminated Entry System
• To Unlock the Doors and Liftgate
• To Lock the Doors and Liftgate
• Using the Panic Alarm
• Programming Additional Transmitters
• Transmitter Battery Service
• How to Use Remote Start
• Manual Door Locks
• Power Door Locks
• Child Protection Door Lock System (Rear Doors)
• Power Windows
• Wind Buffeting
• Lap/Shoulder Belts
• Lap/Shoulder Belt Untwisting Procedure
• Seat Belt Pretensioners
• Enhanced Seat Belt Reminder System (Beltalert )
• Automatic Locking Mode
• Seat Belts and Pregnant Women
• Seat Belt Extender
• Driver and Front Passenger Supplemental
• Restraint System (SRS) - Airbag
• Event Data Recorder (EDR)
• Child Restraint
• Engine Break-In Recommendations
• Transporting Passengers
• Lock Your Vehicle
• Exhaust Gas
• Safety Checks You Should Make Inside the Vehicle
• Periodic Safety Checks You Should Make Outside the Vehicle

Understanding the Features of Your Vehicle

• Inside Day/Night Mirror
• Automatic Dimming Inside Mirror - if Equipped
• Outside Mirrors
• Outside Mirrors Folding Feature - if Equipped
• Power Remote Control Mirrors
• Heated Remote Control Mirrors - if Equipped
• Illuminated Vanity Mirrors - if Equipped
• Parkview Rear Backup Camera - if Equipped
• Phone Call Features
• Uconnect System Features
• Advanced Phone Connectivity
• Things You Should Know about Your Uconnect System
• Voice Recognition System (VR) Operation
• Voice Training
• Manual Front Seat Adjustments
• Power Seat - if Equipped
• Head Restraints
• Heated Seats - if Equipped
• 60/40 Split Second-Row Passenger Seats
• 50/50 Split Third-Row Passenger Seats with Fold-Flat Feature - Seven Passenger Models
• To Open and Close the Hood
• Exterior and Interior Lighting Control
• Headlights and Parking Lights
• Automatic Headlights - if Equipped
• Headlights with Wipers (Available with Auto Headlights Only)
• Headlight Time Delay - if Equipped
• Daytime Running Lights (DRL) - if Equipped
• Lights-On Reminder
• Fog Lights - if Equipped
• Turn Signals
• Highbeam/Lowbeam Select Switch
• Flash to Pass
• Interior Lights
• Intermittent Wiper System
• Mist Feature
• Windshield Washers
• Adding Washer Fluid
• Tilt/Telescoping Steering Column - if Equipped
• Electronic Speed Control Operation
• To Activate
• To Set at a Desired Speed
• To Deactivate
• To Resume Speed
• To Vary the Speed Setting
• To Accelerate for Passing
• Courtesy/Reading Lights
• Sunglasses Storage
• Interior Observation Mirror
• Power Sunroof Switch - if Equipped
• Programming Homelink
• Gate Operator/Canadian Programming
• Using Homelink
• Reprogramming a Single Homelink Button
• Troubleshooting Tips
• Opening Sunroof - Manually
• Opening Sunroof - Express
• Closing Sunroof - Manually
• Closing Sunroof - Express
• Pinch Protect Feature
• Pinch Protect Override
• Venting Sunroof - Express
• Sunshade Operation
• Sunroof Maintenance
• Ignition off Operation
• Sunroof Fully Closed
• Electrical Outlet Use with Engine off
• Power Inverter - if Equipped
• Bottle Holders
• Beverage Cooler/Storage Compartment - if Equipped
• Instrument Panel Storage Compartment - if Equipped
• Center Console Storage
• Flip 'N Stow™ Front Passenger Seat Storage - if Equipped
• Second-Row Passenger Seat Temporary Storage bin
• Second-Row Map Pocket and Grocery Retainers
• 184 Understanding the Features of Your Vehicle
• In-Floor Storage bin with Removable Liner
• Rechargeable Flashlight - if Equipped
• Cargo Management System
• Rear Window Wiper/Washer - if Equipped
• Rear Window Defroster - if Equipped
• Roof Luggage Rack - if Equipped

Understanding Your Instrument Panel

• Instrument Panel Features
• Instrument Cluster
• Instrument Cluster Descriptions
• Electronic Vehicle Information Center (EVIC) Displays
• Oil Change Required
• Trip Functions
• Compass Display
• Personal Settings (Customer Programmable Features)
• Radio Broadcast Signals
• Two Types of Signals
• Electrical Disturbance
• AM Reception
• FM Reception
• Operating Instructions - Satellite Radio (if Equipped)
• Operating Instructions - Voice Recognition
• System (VR) (if Equipped)
• Operating Instructions - Hands-Free
• Communication (Uconnect ) (if Equipped)
• Clock Setting Procedure
• Operating Instructions - Radio Mode
• Operation Instructions - (Disc Mode for CD and MP3/WMA Audio Play, DVD-Video)
• Notes on Playing MP3/WMA Files
• List Button (Disc Mode for MP3/WMA Play)
• Info Button (Disc Mode for MP3/WMA Play)
• Operation Instructions - CD Mode for CD and MP3 Audio Play
• Notes on Playing MP3 Files
• List Button (CD Mode for MP3 Play)
• Info Button (CD Mode for MP3 Play)
• Operating Instructions - Satellite Radio
• System Activation
• Electronic Serial Number/Sirius Identification Number (ESN/SID)
• Selecting Satellite Mode
• Satellite Antenna
• Reception Quality
• Operating Instructions - Satellite Mode
• Operating Instructions - Hands-Free Phone
• Operating Instructions - Video Entertainment
• System (VES ) (if Equipped)
• Video Entertainment System - if Equipped
• Connecting the Ipod Device
• Controlling the Ipod Using Radio Buttons
• List or Browse Mode
• Right-Hand Switch Functions
• Left-Hand Switch Functions for Radio Operation
• Left-Hand Switch Functions for Media (I.e., CD) Operation
• CD/DVD Maintenance
• General Climate Control Functions - All Systems
• Radio Operation and Cellular Phones
• Single-Zone Manual Air Conditioning and Heating System
• Two- and Three-Zone Manual Air Conditioning and Heating Systems - if Equipped
• Two- and Three-Zone Automatic Temperature Control (ATC) Systems - if Equipped
• Operating Tips

Starting and Operating

• Automatic Transaxle
• Normal Starting (Tip Start)
• Extremely Cold Weather
• (Below 20°F or 29°C)
• If Engine Fails to Start
• After Starting
• Brake/Transaxle Interlock System
• Automatic Transaxle Ignition Interlock System
• 4-Speed or 6-Speed (Autostick ) Automatic Transaxle
• Engine Block Heater - if Equipped
• Autostick Operation
• Autostick General Information
• All Wheel Drive (AWD) - if Equipped
• Acceleration
• Flowing/Rising Water
• Parking Brake
• Anti-Lock Brake System (ABS)
• Brake Assist System (BAS)
• Traction Control System (TCS)
• Electronic Roll Mitigation (ERM)
• Electronic Stability Program (ESP)
• Indicator Light
• Trailer Sway Control (TSC)
• Power Steering
• Tire Markings
• Tire Loading and Tire Pressure
• Tire Pressure
• Tire Chains
• Base System - if Equipped
• Premium System - if Equipped
• (Except California Emission States)
• Ethanol Fuel (E-85)
• Fuel Requirements for FFV Vehicles
• Engine Block Heater (if Equipped)
• Selection of Engine Oil for Flexible Fuel Vehicles (E-85) and Gasoline Vehicles
• Cruising Range
• Replacement Parts
• Maintenance
• 2.4L and 2.7L Engines
• 3.5L Engine
• Reformulated Gasoline
• Gasoline/Oxygenate Blends
• MMT in Gasoline
• Materials Added to Fuel
• Fuel System Cautions
• Carbon Monoxide Warnings
• Fuel Filler Cap (Gas Cap)
• Loose Fuel Filler Cap Message
• Starting and Operating 367
• Vehicle Certification Label
• Gross Vehicle Weight Rating (GVWR)
• Gross Axle Weight Rating (GAWR)
• Overloading
• Common Towing Definitions
• Trailer Hitch Classification
• Trailer Towing Weights (Maximum Trailer Weight Ratings)
• Trailer and Tongue Weight
• Towing Requirements
• Towing Tips
• Towing this Vehicle Behind Another Vehicle

Advertisement

Quick Links

• Things to Know before Starting Your Vehicle 11
• Understanding the Features of Your Vehicle 81
• Understanding Your Instrument Panel 199
• Starting and Operating 301
• What to Do in Emergencies 391
• Maintaining Your Vehicle 415
• If You Need Consumer Assistance 487

Related Manuals for Dodge JOURNEY 2009

Summary of Contents for Dodge JOURNEY 2009

• Page 2 VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name This manual illustrates and describes the operation of Chrysler LLC shall be deemed to be deleted and the features and equipment that are either standard or op- name Chrysler Canada Inc.

Page 3: Introduction 3

• Page 5 INTRODUCTION CONTENTS Introduction ......4 Vehicle Identification Number ....6 How To Use This Manual .

Page 6: Introduction

• Page 7 INTRODUCTION 5...

Page 8: Warnings And Cautions

Page 9: vehicle modifications/alterations, page 11: table of contents.

• Page 12 10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Using The Panic Alarm ....24 Wind Buffeting ......37 Programming Additional Transmitters .
• Page 13 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 Event Data Recorder (EDR) ....62 Exhaust Gas ......75 Child Restraint .

Page 14: Things To Know Before Starting Your Vehicle 9

Page 15: fob with integrated key, page 16: tip start feature, page 17: key-in-ignition reminder, page 18: replacement keys, page 19: customer key programming, page 20: general information, page 21: to arm the system, page 22: illuminated entry system, page 23: to unlock the doors and liftgate.

• Page 24 22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles not equipped with the EVIC, perform the Flash Lights with Remote Key Lock following steps: This feature will cause the turn signal lights to flash when the doors are locked or unlocked with the transmitter. 1.

Page 25: To Lock The Doors And Liftgate

Page 26: using the panic alarm, page 27: programming additional transmitters, page 28: general information.

• Page 29 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 • BRAKE switch inactive (brake pedal not pressed) • The engine can be started two consecutive times (two 15-minute cycles) with the RKE transmitter. However, • Ignition key removed from ignition switch the ignition switch must be cycled to the ON position •...

Page 30: Door Locks

Page 31: power door locks.

• Page 32 30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To prevent you from locking your key in the vehicle, the Automatic Door Locks — If Equipped power door lock switch will not operate when the key is The auto door lock feature can be enabled or disabled by in the ignition and either front door is open.

Page 33: Child Protection Door Lock System (Rear Doors)

• Page 34 32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Engage the Child Protection Door Lock System 3. Repeat Steps 1 and 2 for the opposite rear door. 1. Open the rear door. NOTE: When the Child Protection Door Lock system is engaged, the door can be opened only by using the 2.
• Page 35 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 NOTE: • After engaging the Child Protection Door Lock sys- tem, always test the door from the inside to make certain it is in the desired position. • For emergency exit with the system engaged, move the lock plunger up to the UNLOCKED position, roll down the window, and open the door with the outside door handle.

Page 36: Windows

• Page 37 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 Settings (Customer Programmable Features)” under To open the window part way, press the window switch “Electronic Vehicle Information Center (EVIC)” in to the first detent and release it when you want the Section 4.
• Page 38 36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Window Lockout Switch • If the window runs into any obstacle during Auto- The window lockout switch on the driver’s door trim closure, it will reverse direction and then stop. Remove panel allows you to disable the window control on the the obstacle and use the window switch again to close other doors.

Page 39: Wind Buffeting

Page 40: occupant restraints.

• Page 41 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 • Supplemental front seat mounted side airbags Please pay close attention to the information in this section. It tells you how to use your restraint system • An energy-absorbing steering column and steering properly to keep you and your passengers as safe as wheel possible.

Page 42: Lap/Shoulder Belts

• Page 43 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door. Sit back and adjust the front seat. 2. The seat belt latch plate is along side the pillar near the back of your seat.
• Page 44 42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. When the belt is long enough to fit, insert the latch WARNING! plate into the buckle until you hear a “click.” • A belt that is buckled into the wrong buckle will not protect you properly.
• Page 45 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 4. Position the lap belt across your thighs, below your WARNING! abdomen. To remove slack in the lap belt portion, pull up a bit on the shoulder belt. To loosen the lap belt if it is too •...
• Page 46 44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 6. To release the belt, push the red button on the buckle. Adjustable Upper Shoulder Belt Anchorage The belt will automatically retract to its stowed position. In the driver’s seat and front passenger’s seat, the shoul- If necessary, slide the latch plate down the webbing to der belt can be adjusted upward or downward to posi- allow the belt to retract fully.

Page 47: Lap/Shoulder Belt Untwisting Procedure

Page 48: seat belt pretensioners, page 49: automatic locking mode, page 50: seat belts and pregnant women, page 51: driver and front passenger supplemental.

• Page 52 50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The front airbags have a multistage inflator design. This This vehicle also has supplemental side curtain airbags to may allow the airbag to have different rates of inflation protect the driver and passengers sitting next to a win- that are based on collision severity.
• Page 53 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 NOTE: Airbag covers may not be obvious in the interior WARNING! trim, but they will open to allow airbag deployment. • Do not stack luggage or other cargo up high enough The supplemental front seat mounted side airbags are to block the location of the side curtain airbag.
• Page 54 52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Do not use a clothing bar mounted to the coat Here are some simple steps you can take to minimize hooks in this vehicle. A clothing bar will impede the the risk of harm from a deploying airbag. proper performance of the curtain airbags.
• Page 55 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 3. Older children who do not use child restraints or 7. The driver’s seat and front passenger’s seat should be belt-positioning booster seats should ride properly buck- moved back as far as practical to allow the airbags time to led up in the rear seat.
• Page 56 54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Airbag System Components WARNING! The airbag system consists of the following: • Relying on the airbags alone could lead to more • Occupant Restraint Controller (ORC) severe injuries in a collision. The airbags work •...
• Page 57 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 • Knee Impact Bolsters • The ORC and other systems monitor the readiness of the electronic components whenever the ignition • Front Acceleration Sensors switch is in the START or ON position. These include •...
• Page 58 56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE panel separate and fold out of the way as the bags WARNING! inflate to their full size. The bags fully inflate in about 50 to 70 ms. This is about half of the time that it takes Ignoring the Airbag Warning Light in your instru- to blink your eyes.
• Page 59 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 gas is generated to inflate the side curtain airbag. The seam in the seat’s trim cover and opens into the space inflating side curtain airbag pushes the outside edge of between the occupant and the door. The airbag inflates the headliner out of the way and covers the window.
• Page 60 58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Do not replace the seat cover with an aftermarket WARNING! seat cover. • Do not add a secondary seat cover other than those Unapproved modifications or service procedures to the front seat assembly, its related components, or approved by the manufacturer of this vehicle/ seat cover may inadvertently change the airbag de- Mopar .
• Page 61 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 If a Deployment Occurs However, if you haven’t healed significantly within a The airbag system is designed to deploy when the ORC few days or if you have any blistering, see your doctor detects a moderate to severe collision to help restrain the immediately.
• Page 62 60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Enhanced Accident Response System WARNING! In the event of an impact that causes airbag deployment, with the vehicle communication network intact, and the Deployed airbags and seat belt pretensioners cannot power intact, the Enhanced Accident Response System protect you in another collision.
• Page 63 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 Maintaining Your Airbag System NOTE: Perchlorate Material — special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate. WARNING! Airbag Warning Light You will want to have the airbags ready to • Modifications to any part of the airbag system inflate for your protection in an impact.

Page 64: Event Data Recorder (Edr)

• Page 65 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 • Diagnostic trouble code(s) and warning light status for may be released for incorporation in aggregate crash databases, such as those maintained by the U.S. govern- electronically-controlled safety systems, including the ment and various states. Data of a potentially sensitive airbag system nature, such as would identify a particular driver, ve- •...

Page 66: Child Restraint

• Page 67 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 Infants and Child Restraints “LATCH — Child Seat Anchor System (Lower An- chors and Tether for CHildren)” in this section. • Safety experts recommend that children ride • Rearward-facing child seats must NEVER be used in rearward-facing in the vehicle until they are at least one year old and weigh at least 20 lbs (9 kg).
• Page 68 66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Check belt fit periodically. A child’s squirming or The belt-positioning booster seat is for children weighing more than 40 lbs (18 kg), but who are still too small to fit slouching can move the belt out of position. the vehicle’s seat belts properly.
• Page 69 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 Standards. We also recommend that you make sure WARNING! that you can install the child restraint in the vehicle where you will use it before you buy it. • Improper installation can lead to failure of an •...
• Page 70 68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LATCH — Child Seat Anchor System (Lower connection to the top tether anchors have been available Anchors and Tether for CHildren) for some time. For some older child restraints, many Your vehicle’s second row passenger seats are equipped child restraint manufacturers offer add-on tether strap with the child restraint anchor system called LATCH.
• Page 71 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 Installing the LATCH-Compatible Child Restraint System We urge you to follow the manufacturer’s directions carefully when installing your child restraint. Not all child restraint systems will be installed as described here. Again, carefully follow the installation instructions that are provided with the child restraint system.
• Page 72 70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE In addition, there are tether strap anchors located behind means of adjusting the tension in the strap. Forward- each rear seatback, near to the floor. facing toddler restraints and some rear-facing infant restraints will also be equipped with a tether strap, a hook for attachment to the tether strap anchor and a means of adjusting the tension of the strap.
• Page 73 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 NOTE: WARNING! • Ensure that the tether strap does not slip into the opening between the seatbacks as you remove slack in Improper installation of a child restraint to the the strap. LATCH anchorages can lead to failure of an infant or •...
• Page 74 72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE then allow the belt to retract into the retractor. For To attach a child restraint tether strap: additional information on ALR, refer to “Automatic • Route the tether strap to provide the most direct path Locking Mode”...
• Page 75 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 • If necessary, move the seat forward to provide better NOTE: Ensure that the tether strap does not slip into the access to the tether anchor. opening between the seatbacks as you remove slack in the strap.

Page 76: Engine Break-In Recommendations

Page 77: lock your vehicle, page 78: safety checks you should make inside the vehicle, page 79: periodic safety checks you should make outside the vehicle.

• Page 81 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS Mirrors .......84 Illuminated Vanity Mirrors — If Equipped ..87 Inside Day/Night Mirror .
• Page 82 80 UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information ....116 To Open And Close The Hood ... . . 142 Voice Recognition System —...
• Page 83 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 81 Flash To Pass ......149 To Set At A Desired Speed ....158 Interior Lights .
• Page 84 82 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Using HomeLink ..... 166 Venting Sunroof - Express ....170 Reprogramming A Single HomeLink Sunshade Operation .
• Page 85 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 83 Storage ......178 In-Floor Storage Bin With Removable Liner . . . 184 Beverage Cooler/Storage Compartment —...

Page 86: Mirrors

Page 87: automatic dimming inside mirror - if equipped, page 88: outside mirrors folding feature - if equipped, page 89: heated remote control mirrors - if equipped, page 90: parkview rear backup camera - if equipped, page 91: hands-free communication (uconnect ) - if equipped.

• Page 92 • www.chrysler.com/uconnect purse, pocket, or briefcase), as long as your phone is turned on and has been paired to the vehicle’s • www.dodge.com/uconnect UConnect system. The UConnect system allows up to • www.jeep.com/uconnect seven cellular phones to be linked to the system. Only one linked (or paired) cellular phone can be used with the •...

Page 93: Operation

• Page 94 92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • For certain operations, compound commands can be Help Command used. For example, instead of saying Setup and then If you need assistance at any prompt, or if you want to Phone Pairing, the following compound command know your options at any prompt, say Help following can be said: Setup Phone Pairing.
• Page 95 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93 • For identification purposes, you will be prompted to To complete the pairing process, you will need to refer- ence your cellular phone Owner’s Manual. The give the UConnect system a name for your cellular UConnect website may also provide detailed instruc- phone.
• Page 96 94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Dial by Saying a Number Call by Saying a Name • Press the PHONE button to begin. • Press the PHONE button to begin. • After the Ready prompt and the following beep, say •...
• Page 97 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95 Add Names to Your UConnect Phonebook After you are finished adding an entry into the phone- book, you will be given the opportunity to add more NOTE: Adding names to the phonebook is recom- phone numbers to the current entry or to return to the mended when the vehicle is not in motion.
• Page 98 96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Object Exchange Profile (OBEX). Please see your phone Edit Entries in the UConnect Phonebook Owner’s Manual for specific instructions on how to send NOTE: Editing names in the phonebook is recom- these entries from your phone. mended when the vehicle is not in motion.
• Page 99 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 97 Phonebook Edit can be used to add another phone from which you choose. To select one of the entries number to a name entry that already exists in the from the list, press the “Voice Recognition” button phonebook.

Page 100: Phone Call Features

• Page 101 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 the call, press and hold the PHONE button until you hear Call followed by the phone number or phonebook entry a single beep, indicating that the incoming call was you wish to call. The first call will be on hold while the rejected.
• Page 102 100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Conference Call hold may not become active automatically. This is cell When two calls are in progress (one active and one on phone-dependent. To bring the call back from hold, press hold), press and hold the PHONE button until you hear and hold the PHONE button until you hear a single beep.

Page 103: Uconnect System Features

• Page 104 102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If the phone is not reachable and the UConnect system Your phone must be turned on and paired to the is operational, you may reach the emergency number as UConnect system to allow use of this vehicle feature in follows: emergency situations, when the cell phone has network coverage and stays paired to the UConnect system.
• Page 105 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 Paging When calling a number with your UConnect system To learn how to page, refer to Working with Automated that normally requires you to enter in a touch-tone Systems. Paging works properly except for pagers of sequence on your cellular phone keypad, you can press certain companies, which time out a little too soon to the “Voice Recognition”...
• Page 106 104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE send the corresponding phone number associated with Turning Confirmation Prompts On/Off the phonebook entry, as tones over the phone. Turning confirmation prompts off will stop the system from confirming your choices (e.g., the UConnect sys- NOTE: tem will not repeat a phone number before you dial it).

Page 107: Advanced Phone Connectivity

• Page 108 106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When prompted, say List Phones. from your UConnect paired cellular phone to the UConnect system or vice versa, press the “Voice Recog- • The UConnect system will play the phone names of nition”...

Page 109: Things You Should Know About Your Uconnect System

• Page 110 108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Speak normally, without pausing, just as you would Repeat the words and phrases when prompted by the UConnect system. For best results, the Voice Training speak to a person sitting a few feet/meters away from session should be completed when the vehicle is parked you.
• Page 111 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 • Even though the system is designed for users speaking • The UConnect phonebook nametag recognition rate in North American English, French, and Spanish ac- is optimized for the person who stored the name in the cents, the system may not always work for some.
• Page 112 110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Echo at the far end can sometimes be reduced by Far End Audio Performance lowering the in-vehicle audio volume. • Audio quality is maximized under: • In a convertible vehicle, system performance may be •...
• Page 113 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111...
• Page 114 112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
• Page 115 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113...
• Page 116 114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Commands Voice Commands Primary Alternate(s) Primary Alternate(s) zero call cancel confirmation prompts three continue four delete five dial download seven edit eight emergency nine English star (*) erase all plus (+) Espanol pound (#) Francais add location...
• Page 117 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 Voice Commands Voice Commands Primary Alternate(s) Primary Alternate(s) language redial list names return to main menu return or main menu list phones select phone select mobile send mute set up phone settings or phone set up mute off towing assistance...

Page 118: General Information

Page 119: commands.

• Page 120 118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • PREVIOUS STATION (to select the previous station) Main Menu Start a dialogue by pressing the VR hard-key. You may • RADIO MENU (to switch to the radio menu) say MAIN MENU to switch to the main menu. •...
• Page 121 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 Satellite Radio Disc To switch to satellite radio mode say SAT or SATELLITE To switch to the disc mode say DISC. In this mode, you RADIO. In this mode, you may say the following com- may say the following commands: mands: •...

Page 122: Voice Training

Page 123: seats.

• Page 124 122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be adjusted properly and you could be injured. Adjust any seat only while the vehicle is parked.
• Page 125 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 Lumbar Support — If Equipped WARNING! The control lever is on the outboard side of the seatback. Turn the control lever downward to increase the lumbar • Adjusting a seat while the vehicle is moving is support or upward to decrease the lumbar support as dangerous.
• Page 126 124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Driver’s Seat Height Adjustment — If Equipped Fold Flat Front Passenger Seat — If Equipped The control lever is located on the outboard side of the This feature allows for extended cargo space. When the seat.
• Page 127 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 Pull upward on the lever to fold or unfold the seat. WARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. Adjust any seat only while the vehicle is parked.

Page 128: Power Seat - If Equipped

Page 129: head restraints.

• Page 130 128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Third Row Passenger Seats — Seven Passenger WARNING! Models These head restraints are non-adjustable and non- • Do not sit in a seat or allow a passenger to sit in a removable. However, you can fold them forward when seat without having the head restraint installed they are not in use by passengers.

Page 131: Heated Seats - If Equipped

Page 132: 60/40 split second-row passenger seats.

• Page 133 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 To Fold the Seat WARNING! 1. Locate the control lever on the lower outboard side of • It is extremely dangerous to ride in a cargo area, the seat. inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seri- ously injured or killed.
• Page 134 132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Lift the control lever with the other hand, allow the WARNING! seatback to move forward slightly, and then release the lever. Be certain that the seatback is locked securely into position. Otherwise, the seat will not provide the WARNING! proper stability for child seats and/or passengers.
• Page 135 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 WARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be adjusted properly and you could be injured. Adjust any seat only while the vehicle is parked.
• Page 136 134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Recliner Adjustment WARNING! The control lever is on the outboard side of the seat. To recline the seat, lean back, lift the lever, position the • Adjusting a seat while the vehicle is moving is seatback as desired, and then release the lever.
• Page 137 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 20% Seatback/Armrest — Second Row Passenger Raise the 20% seatback/armrest and lock it in place when Seat not in use or when additional seating area is required. The latch release-loop is located at the top of the 20% WARNING! seatback/armrest.
• Page 138 136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Integrated Child Booster Seat — If Equipped The booster seat latch release-loop is located at the front The Integrated Child Booster Seat is located in each of the seat cushion. Pull the release-loop forward to outboard second-row passenger seat.
• Page 139 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 WARNING! Be certain that the seat cushion is locked securely into position before using the seat. Otherwise, the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat cushion could cause serious injury.
• Page 140 138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Move the control lever on the upper outboard side of the seatback forward, and in one fluid motion, the seat cushion flips upward and the seat moves forward on its tracks. Tip n Slide Seat™ Tip ’n Slide™...
• Page 141 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 NOTE: A hand-grip is molded into the front of each WARNING! quarter trim panel near the door opening to assist entry and exit from the third-row passenger seats. Do not drive the vehicle with the seat in this posi- tion, as it is only intended for entering and exiting the third row seats.

Page 142: 50/50 Split Third-Row Passenger Seats With Fold-Flat Feature - Seven Passenger Models

• Page 143 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 To Unfold the Seat The seatback can also be locked in a reclined position. To Grasp the assist strap loop on the seatback and pull it do so, pull the latch release-loop located at the top of the toward you to raise the seatback.

Page 144: To Open And Close The Hood

• Page 145 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 Use the hood prop rod to secure the hood in the open To prevent possible damage: position. Place the upper end of the prop rod in the hole • Before closing hood, make sure the hood prop rod is on the underside of the hood.

Page 146: Lights

Page 147: automatic headlights - if equipped, page 148: daytime running lights (drl) - if equipped, page 149: turn signals, page 150: highbeam/lowbeam select switch, page 151: flash to pass.

• Page 152 150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Cargo Light This light is mounted in the liftgate trim panel. It turns on when you press the UNLOCK button on the RKE trans- mitter, open a door or the liftgate, or turn the Dimmer Control completely upward to the second detent.

Page 153: Windshield Wipers And Washers

• Page 154 152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rotate the end of the lever to the first detent past the CAUTION! intermittent settings for low speed wiper operation, or to the second detent past the intermittent settings for high • Turn the windshield wipers OFF when driving speed wiper operation.

Page 155: Intermittent Wiper System

Page 156: headlights with wipers (available with auto headlights only), page 157: adding washer fluid, page 158: tilt/telescoping steering column - if equipped, page 159: electronic speed control - if equipped, page 160: to set at a desired speed, page 161: to vary the speed setting, page 162: overhead console, page 163: courtesy/reading lights.

• Page 164 162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The HomeLink buttons that are located in the sun visor WARNING! designate the three different HomeLink channels. Your motorized door or gate will open and close while you are training the Universal Transceiver. Do not train the transceiver if people or pets are in the path of the door or gate.

Page 165: Programming Homelink

• Page 166 164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: If the indicator light stays on constantly, programming is • Some gate operators and garage door openers may complete and the garage door (or device) should activate require you to replace Step 3 with procedures noted in when the HomeLink button is pressed.

Page 167: Gate Operator/Canadian Programming

Page 168: using homelink, page 169: security, page 170: power sunroof - if equipped, page 171: opening sunroof - manually, page 172: closing sunroof - express, page 173: sunshade operation, page 174: sunroof fully closed.

• Page 175 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 A third fused 12-Volt power outlet is located on the back A fourth fused 12-Volt power outlet is located on the left of the center console. This outlet has power available quarter trim panel in the cargo area. This outlet has when the ignition switch is in the LOCK, ON or ACC power available when the ignition switch is in the ON or position.

Page 176: Electrical Outlet Use With Engine Off

• Page 177 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 The control switch for the outlet is located in the switch NOTE: Due to built-in overload protection, the power bank above the climate control. outlet will shut down if the 115 Volt AC (150 Watt maximum) power rating is exceeded.

Page 178: Cup And Bottle Holders

Page 179: bottle holders, page 180: storage.

• Page 181 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 Press and release the button on the door to open it. The large door swings upward to allow easy access to the compartment’s contents. Beverage Cooler Operation The blower speed setting on the climate control sets the rate at which air flows into the compartment.

Page 182: Instrument Panel Storage Compartment - If Equipped

Page 183: center console storage, page 184: flip 'n stow™ front passenger seat storage - if equipped, page 185: second-row passenger seat temporary storage bin, page 186: second-row map pocket and grocery retainers.

• Page 187 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185 The liner can be removed for easy cleaning by lifting on the notches as shown. In-Floor Storage Bin To access the bin, position the floor mat aside (if equipped). Pull the door latch release-loop upward to Removable Liner release the latch and then forward to open the bin door.

Page 188: Cargo Area Features

• Page 189 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 187 • A retractable cargo area cover (if equipped). Cargo Tie-Downs Cargo tie-downs are located on both rear trim panels. Seven Passenger System Features These tie-downs should be used to secure loads safely • A large built-in storage bin with a hinged hardcover when the vehicle is moving.
• Page 190 188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Always place cargo evenly on the cargo floor. Put WARNING! heavier objects as low and as far forward as possible. • Cargo tie-downs are not safe anchors for a child • Place as much cargo as possible in front of the rear seat tether strap.
• Page 191 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189 Retractable Cargo Area Cover (If Equipped) — Five the left or the right spring-loaded post (located on the Passenger Models ends of the cover housing) into the left attachment point or the right attachment point (shown). NOTE: The purpose of this cover is for privacy, not to secure loads.
• Page 192 190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Next, grab the cover handle and pull the cover toward WARNING! you. As the cover nears the liftgate opening, guide the rear attachment posts (on both ends of the cover) into the A cargo cover that is unsecured in the vehicle could notches in the trim panels.

Page 193: Rear Window Features

• Page 194 192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Adding Washer Fluid CAUTION! NOTE: Refer to the “Engine Compartment” diagram in • Turn the rear wiper OFF when driving through an Section 7 for the location of the washer fluid reservoir. automatic car wash. Damage to the rear wiper may The windshield washer and rear window washer share result if the REAR WIPER switch is left in the ON the same fluid reservoir.

Page 195: Rear Window Defroster - If Equipped

Page 196: roof luggage rack - if equipped.

• Page 197 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 195 2. Relocate the cross rails, aligning the cross rail stan- NOTE: • To help control wind noise when installing the cross chions (end pieces) with one of the vertical marks on the outboard surface of the side rail for proper positioning. rails, make sure the arrows marked on the underside There are four frontward marks for the front cross rail of the cross rails face the front of the vehicle.
• Page 198 196 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! WARNING! • Cross rails should remain equally spaced or parallel at Cargo must be securely tied before driving your any luggage rack position for proper function. Noncom- vehicle. Improperly secured loads can fly off the pliance could result in damage to the roof rack, cargo, vehicle, particularly at high speeds, resulting in per- and vehicle.

Page 199: Understanding Your Instrument Panel

• Page 200 198 UNDERSTANDING YOUR INSTRUMENT PANEL Sales Code REN — Multimedia System — If Notes On Playing MP3/WMA Files ..245 Equipped ......232 List Button (Disc Mode For Operating Instructions —...
• Page 201 UNDERSTANDING YOUR INSTRUMENT PANEL 199 Sales Code REU — Multimedia System — If Operating Instructions - Satellite Mode ..269 Equipped ......262 Operating Instructions - Hands-Free Phone (If Operating Instructions —...
• Page 202 200 UNDERSTANDING YOUR INSTRUMENT PANEL Left-Hand Switch Functions For Radio Single-Zone Manual Air Conditioning And Operation ......278 Heating System .

Page 203: Instrument Panel Features

Page 204: instrument cluster, page 205: instrument cluster descriptions.

• Page 206 204 UNDERSTANDING YOUR INSTRUMENT PANEL turn it off. Also, shift the transaxle into NEUTRAL and CAUTION! idle the vehicle. If the temperature reading does not return to normal, turn the engine off immediately and Driving with a hot cooling system could damage call for service.
• Page 207 UNDERSTANDING YOUR INSTRUMENT PANEL 205 7. Turn Signal Indicator Light WARNING! The left or right arrow will flash in unison with the corresponding front and rear turn signal lights when A hot engine cooling system is dangerous. You or the turn signal switch is operated. (See page 147 for more others could be badly burned by steam or boiling information.) coolant.
• Page 208 206 UNDERSTANDING YOUR INSTRUMENT PANEL 10. Vehicle Security Alarm (VSA) Indicator Light — If When blinking: The AWD system is temporarily dis- Equipped abled due to overload condition. This light will flash rapidly for approximately 12. Tachometer 16 seconds when the vehicle Security system is This gauge measures engine revolutions per minute arming and then flash slowly when the system (RPM x 1000).
• Page 209 UNDERSTANDING YOUR INSTRUMENT PANEL 207 15. Odometer/Trip Odometer (ESP in partial off mode), “NoFUSE” (IOD fuse out), The odometer shows the total distance the vehicle has “HotOIL” (2.4L engine oil temp too hot), or “CHANgE been driven. The trip odometer shows individual trip OIL”...
• Page 210 208 UNDERSTANDING YOUR INSTRUMENT PANEL off the message. If the problem persists, the message will Unless reset, this message will continue to display each appear the next time the vehicle is started. time you turn the ignition switch to the ON position. To turn off the message temporarily, press and release the A loose, improperly installed, or damaged fuel filler cap TRIP ODOMETER button on the instrument cluster.
• Page 211 UNDERSTANDING YOUR INSTRUMENT PANEL 209 16. Electronic Throttle Control (ETC) Warning Light — Also, have the system checked by an authorized dealer if If Equipped the light does not turn on during starting. This light will turn on briefly as a bulb check 17.
• Page 212 210 UNDERSTANDING YOUR INSTRUMENT PANEL 18. Charging System Warning Light Resetting the Trip Odometer This light shows the status of the electrical charg- Display the trip mileage that you want to reset, “Trip A” ing system. The light should turn on when the or “Trip B.”...
• Page 213 UNDERSTANDING YOUR INSTRUMENT PANEL 211 As an added safety feature, your vehicle has been operating properly. The TPMS malfunction indicator is equipped with a tire pressure monitoring system (TPMS) combined with the low tire pressure telltale. When the that illuminates a low tire pressure telltale when one or system detects a malfunction, the telltale will flash for more of your tires is significantly under-inflated.
• Page 214 212 UNDERSTANDING YOUR INSTRUMENT PANEL 22. Anti-Lock Brake System (ABS) Warning Light CAUTION! This light monitors the Anti-Lock Brake System (ABS). The light will turn on when the ignition The TPMS has been optimized for the original switch is turned to the ON position and may equipment tires and wheels.
• Page 215 UNDERSTANDING YOUR INSTRUMENT PANEL 213 23. Electronic Stability Program (ESP)/Traction stays on through several of your typical driving cycles. In Control System (TCS) Indicator Light most situations, the vehicle will drive normally and will If this indicator light flashes during accelera- not require towing.
• Page 216 214 UNDERSTANDING YOUR INSTRUMENT PANEL 25. Electronic Stability Program (ESP)/Brake Assist 26. Brake System Warning Light System (BAS) Malfunction Indicator Light – If This light monitors various brake functions, Equipped including brake fluid level and parking brake The yellow ESP/BAS Malfunction Indicator application.
• Page 217 UNDERSTANDING YOUR INSTRUMENT PANEL 215 NOTE: The light may flash momentarily during sharp Warning Light and the ABS Light will turn on in the cornering maneuvers due to a change in fluid level. If so, event of an EBD failure. Immediate repair of the ABS is the vehicle should have service performed and the brake required in the event of an EBD failure.
• Page 218 216 UNDERSTANDING YOUR INSTRUMENT PANEL 27. Airbag Warning Light On vehicles equipped with a Mid Line Cluster, this This light will turn on for four to six seconds as display shows the compass heading (N, S, E, W, NE, NW, a bulb check when the ignition switch is first SE, and SW) and the outside temperature.
• Page 219 UNDERSTANDING YOUR INSTRUMENT PANEL 217 NOTE: • Magnetic materials should be kept away from the top of the instrument panel, as this is where the compass sensor is located. • The shift lever must be in PARK to enter the variance setting mode.

Page 220: Electronic Vehicle Information Center (Evic) - If Equipped

• Page 221 UNDERSTANDING YOUR INSTRUMENT PANEL 219 • Compass display, • Outside temperature display, • Trip computer functions, • System status, including vehicle information warning message displays, and Tire Pressure Monitor System (TPMS) displays (if equipped), and, • Personal Settings (customer programmable features). EVIC...
• Page 222 220 UNDERSTANDING YOUR INSTRUMENT PANEL The system allows the driver to select information by Press and release this button and the mode pressing the following buttons mounted on the steering displayed will change between Compass/ wheel. Outside Temperature, Trip Functions, System Status, and Personal Settings.

Page 223: Electronic Vehicle Information Center (Evic) Displays

Page 224: oil change required, page 225: trip functions.

• Page 226 224 UNDERSTANDING YOUR INSTRUMENT PANEL The Trip Functions mode displays the following informa- NOTE: Significant changes in driving style or vehicle tion. loading will greatly affect the actual drivable distance of the vehicle, regardless of the DTE displayed value. • Average Fuel Economy •...

Page 227: Compass Display

• Page 228 226 UNDERSTANDING YOUR INSTRUMENT PANEL Manual Compass Calibration Compass Variance If the compass appears erratic or is inaccurate, you can Compass Variance is the difference between magnetic calibrate the compass manually by performing the fol- North and geographic North. To allow the compass lowing steps.

Page 229: Personal Settings (Customer Programmable Features)

• Page 230 228 UNDERSTANDING YOUR INSTRUMENT PANEL Use the SCROLL button to display one of the following “RKE UNLOCK” choices. When Driver Door 1st Press is selected, only the driver’s door will unlock on the first press of the Remote Keyless “LANGUAGE” Entry (RKE) UNLOCK button.
• Page 231 UNDERSTANDING YOUR INSTRUMENT PANEL 229 “FLASH LAMP WITH LOCK” ON. The headlights will also turn off when the wipers are When ON is selected, the front and rear turn signals will turned OFF if they were turned ON by this feature. To flash when the doors are locked or unlocked with the make your selection, press and release the RESET button RKE transmitter.

Page 232: Radio General Information

Page 233: two types of signals, page 234: sales code ren - multimedia system - if equipped, page 235: operating instructions - voice recognition.

• Page 236 234 UNDERSTANDING YOUR INSTRUMENT PANEL 2. Touch the screen where the time is displayed. The Touch the screen where the words “Show Time if Radio is clock setting menu will appear on the screen. Off” are displayed to change the current setting. 3.

Page 237: Sales Code Req - Am/Fm Stereo Radio And 6-Disc Cd/Dvd Changer (Mp3/Wma Aux Jack)

• Page 238 236 UNDERSTANDING YOUR INSTRUMENT PANEL to seek up and the left switch to seek down. The radio Phone Button (UConnect Hands-Free Phone) — If will remain tuned to the new station until you make Equipped another selection. Holding either button will bypass Press this button to operate the Hands-Free Phone stations without stopping until you release it.
• Page 239 UNDERSTANDING YOUR INSTRUMENT PANEL 237 3. After adjusting the hours, press the right side TUNE/ RW/FF SCROLL control knob to set the minutes. The minutes Pressing the RW (Rewind) or FF (Fast Forward) buttons will begin to blink. causes the tuner to search for the next frequency in the direction of the arrows.
• Page 240 238 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob a third or turning the TUNE/SCROLL control knob within five time and TREBLE will display. Turn the TUNE/SCROLL seconds will allow the program format type to be se- control knob to the right or left to increase or decrease the lected.
• Page 241 UNDERSTANDING YOUR INSTRUMENT PANEL 239 By pressing the SEEK button when the Music Type icon Program Type 16-Digit Character Display is displayed, the radio will be tuned to the next frequency News News station with the same selected Music Type name. The Nostalgia Nostalga Music Type function only operates when in the FM...
• Page 242 240 UNDERSTANDING YOUR INSTRUMENT PANEL • DVD Enter - When the disc is in DVD Menu mode, • Angle – Repeatedly pressing SELECT will change selecting DVD Enter will allow you to play the current the viewing angle if supported by the DVD disc (if highlighted selection.
• Page 243 UNDERSTANDING YOUR INSTRUMENT PANEL 241 • Set Home Clock - Pressing the SELECT button allows Audio Language — If Equipped you to set the clock. Turn the TUNE/SCROLL control Selecting this item allows you to choose a default audio knob to adjust the hours and then press and turn the language (effective only if the language is supported by TUNE/SCROLL control knob to adjust the minutes.
• Page 244 242 UNDERSTANDING YOUR INSTRUMENT PANEL Audio DRC — If Equipped a disc is loaded, changes will not be effective. Also, the defaults are effective only if the disc supports the Selecting this item allows you to limit maximum audio customer-preferred settings. dynamic range.

Page 245: Operation Instructions - (Disc Mode For Cd And Mp3/Wma Audio Play, Dvd-Video)

• Page 246 244 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: The ignition switch must be in the ON or ACC Eject Button — Ejecting Compact Disc(s) position to operate the radio. Press the EJECT button and the pushbutton with the corresponding number (1-6) where the LOAD Button —...

Page 247: Notes On Playing Mp3/Wma Files

• Page 248 246 UNDERSTANDING YOUR INSTRUMENT PANEL • Maximum number of directory levels: 8 If a disc contains multi-formats, such as CD audio and MP3/WMA tracks, the radio will only play the MP3/ • Maximum number of files: 255 WMA tracks on that disc. •...
• Page 249 UNDERSTANDING YOUR INSTRUMENT PANEL 247 Playback of MP3/WMA Files MPEG Sampling Fre- Bit Rate (kbps) When a medium containing MP3/WMA data is loaded, Specification quency (kHz) the radio checks all files on the medium. If the medium 320, 256, 224, contains a lot of folders or files, the radio will take more MPEG-1 Audio 192, 160, 128,...

Page 250: List Button (Disc Mode For Mp3/Wma Play)

• Page 251 UNDERSTANDING YOUR INSTRUMENT PANEL 249 SCAN Button (Auxiliary Mode) Operating Instructions — Voice Recognition No function. System (VR) (If Equipped) For the radio, refer to “Voice Recognition System (VR)” in EJECT Button (Auxiliary Mode) Section 3. No function. For UConnect “Voice Recognition System (VR),” refer to “Hands-Free Communication (UConnect )”...

Page 252: Sales Code Res - Am/Fm Stereo Radio With Cd Player (Mp3 Aux Jack)

Page 253: operating instructions - radio mode.

• Page 254 252 UNDERSTANDING YOUR INSTRUMENT PANEL If your vehicle is not equipped with or this feature is not 2. Adjust the hours by turning the right side Tune/Scroll available on your vehicle, a “Not Equipped With control knob. UConnect” message will display on the radio screen. 3.
• Page 255 UNDERSTANDING YOUR INSTRUMENT PANEL 253 INFO Button Push the rotary Tune/Scroll control knob a second time Press the INFO button for an RDS station (one with call and MID will display. Turn the Tune/Scroll control knob letters displayed). The radio will return a Radio Text to the right or left to increase or decrease the mid-range message broadcast from an FM station (FM mode only).
• Page 256 254 UNDERSTANDING YOUR INSTRUMENT PANEL MUSIC TYPE Button Program Type 16-Digit Character Display Pressing this button once will turn on the Music Type Information Inform mode for five seconds. Pressing the MUSIC TYPE button Jazz Jazz or turning the Tune/Scroll control knob within five News News seconds will allow the program format type to be se-...
• Page 257 UNDERSTANDING YOUR INSTRUMENT PANEL 255 Tune/Scroll control knob to adjust the minutes. Press Program Type 16-Digit Character Display the Tune/Scroll control knob again to save changes. Top 40 Top 40 AM and FM Buttons Weather Weather Press the buttons to select AM or FM modes. By pressing the SEEK button when the Music Type icon is displayed, the radio will be tuned to the next frequency SET Button —...

Page 258: Operation Instructions - Cd Mode For Cd And Mp3 Audio Play

• Page 259 UNDERSTANDING YOUR INSTRUMENT PANEL 257 If you have ejected a disc and have not removed it within CAUTION! 10 seconds, it will be reloaded. If the CD is not removed, the radio will reinsert the CD but will not play it. •...

Page 260: Notes On Playing Mp3 Files

• Page 261 UNDERSTANDING YOUR INSTRUMENT PANEL 259 • Level 2: 31 (including a separator . and a three- files properly and may be unable to play the file nor- mally. UDF and Apple HFS formats are not supported. character extension) The radio uses the following limits for file systems: Multisession disc formats are supported by the radio.
• Page 262 260 UNDERSTANDING YOUR INSTRUMENT PANEL rates (VBR) are also supported. The majority of MP3 files Playback of MP3 Files use a 44.1 kHz sampling rate and a 192, 160, 128, 96 or When a medium containing MP3 data is loaded, the VBR bit rates.

Page 263: List Button (Cd Mode For Mp3 Play)

Page 264: sales code reu - multimedia system - if equipped, page 265: operating instructions - satellite radio.

• Page 266 264 UNDERSTANDING YOUR INSTRUMENT PANEL Changing the Time Zone surrounding the joystick to select the desired time zone setting, and then press and release the joystick. A check NOTE: You can skip Steps 2 and 3 by pressing and mark will display next to the selection. holding the “TIME”...
• Page 267 UNDERSTANDING YOUR INSTRUMENT PANEL 265 turn the knob surrounding the joystick to select “Time NOTE: You can skip Steps 2 and 3 by pressing and Setup,” and then press and release the joystick. holding the “TIME” button on the radio for three sec- onds.
• Page 268 266 UNDERSTANDING YOUR INSTRUMENT PANEL 6. Turn the knob surrounding the joystick to set the hour 1. Turn on the multimedia system. highlighted on the clock on the screen. Press and release 2. Press and release the “SETUP” button on the radio. the joystick when done.

Page 269: Satellite Radio - If Equipped (Ren/Req/Rer/Res/Reu Radios Only)

Page 270: selecting satellite mode, page 271: operating instructions - satellite mode.

• Page 272 270 UNDERSTANDING YOUR INSTRUMENT PANEL RW/FF By pressing the SEEK button when the Music Type Pressing the RW (Rewind) or FF (Fast Forward) buttons function is active, the radio will be tuned to the next causes the tuner to search for the next channel in the channel with the same selected Music Type name.

Page 273: Operating Instructions - Hands-Free Phone

Page 274: video entertainment system - if equipped, page 275: universal consumer interface (uci) - if equipped, page 276: connecting the ipod device.

• Page 277 UNDERSTANDING YOUR INSTRUMENT PANEL 275 RW (Rewind) Button previous track in the list; if you press this button at any Press and hold the RW button to move backward in the other time in the current track it will go back to the current track.

Page 278: List Or Browse Mode

• Page 279 UNDERSTANDING YOUR INSTRUMENT PANEL 277 Radio Preset Buttons LIST Button In the List mode, the radio preset buttons are used as Pressing the LIST button will take to the top level menu shortcuts to the following lists on the iPod device. of the iPod .

Page 280: Remote Sound System Controls - If Equipped

Page 281: left-hand switch functions for media (i.e., cd) operation, page 282: radio operation and cellular phones, page 283: general climate control functions - all systems.

• Page 284 282 UNDERSTANDING YOUR INSTRUMENT PANEL • Bi-Level floor outlet in the right quarter trim panel, unless the Air is directed through the panel and floor out- climate control for the rear passengers is ON and in lets. For vehicles equipped with a three-zone Panel mode.
• Page 285 UNDERSTANDING YOUR INSTRUMENT PANEL 283 • Defrost NOTE: • Only use the Recirculation mode as a temporary Air is directed through the windshield and side window demist outlets. For vehicles equipped means to block out any outside odors, smoke, or dust, with a three-zone system, air is directed through the and to cool the interior rapidly upon initial start up in floor outlet in the right quarter trim panel, unless the...

Page 286: Single-Zone Manual Air Conditioning And Heating System

Page 287: two- and three-zone manual air conditioning and heating systems - if equipped.

• Page 288 286 UNDERSTANDING YOUR INSTRUMENT PANEL 2. Panel Mode Button 7. Right Front Temperature Control Press and release to select. The indicator illuminates Provides right front seat occupant with independent when selected. temperature control. Turn left for cooler or right for warmer temperature settings.
• Page 289 UNDERSTANDING YOUR INSTRUMENT PANEL 287 1. RR Control Turns the climate control in the overhead console above the second row passenger seats ON and OFF. Press and release to change the current setting. 2. Rear Blower Control The blower speed increases as you move the control to the right from the “O”...
• Page 290 288 UNDERSTANDING YOUR INSTRUMENT PANEL 1. Rear Blower Control The blower speed increases as you move the control to the right from the “O” (Off) position. There are three blower speeds. 2. Rear Temperature Control Provides rear seat occupants with independent tempera- ture control.

Page 291: Two- And Three-Zone Automatic Temperature Control (Atc) Systems - If Equipped

• Page 292 290 UNDERSTANDING YOUR INSTRUMENT PANEL 7. Mode Button Note - To prevent window fogging, Recirculation Mode Press the DOWN or UP arrow to change the mode of air will not operate when either Defrost or Mix mode is distribution to Floor, Panel, Bi-Level, or Mix. selected.
• Page 293 UNDERSTANDING YOUR INSTRUMENT PANEL 291 2. Left Front Temperature Control release to select. Refer to “Automatic Operation — Two- Provides left front seat occupant with independent tem- and Three-Zone ATC” for more information. perature control. Turn left for cooler or right for warmer 7.
• Page 294 292 UNDERSTANDING YOUR INSTRUMENT PANEL Note - To prevent window fogging, Recirculation Mode 2. Rear Temperature Control will not operate when either Defrost or Mix mode is Provides independent temperature control for the rear selected. Doing so will cause the indicator to blink and cabin.
• Page 295 UNDERSTANDING YOUR INSTRUMENT PANEL 293 2. Rear Blower Control The blower speed increases as you move the control to the right from the “O” (Off) position. There are 10 blower speeds. 3. Rear Temperature Control Provides rear seat occupants with independent tempera- ture control.
• Page 296 294 UNDERSTANDING YOUR INSTRUMENT PANEL Automatic Operation — Two- and Three-Zone ATC Using all of these inputs, the system automatically ad- The Two- and Three-Zone ATC systems automatically justs airflow temperature, airflow distribution, airflow maintain the climate in the cabin of the vehicle. To volume, and the amount of outside air recirculation.
• Page 297 UNDERSTANDING YOUR INSTRUMENT PANEL 295 the Left Front Temperature Control to dial in the tem- Automatic Operation — Rear-Zone ATC perature that you want the system to maintain for all 1. Press the REAR button on the Three-Zone ATC in the three zones.

Page 298: Operating Tips

• Page 299 UNDERSTANDING YOUR INSTRUMENT PANEL 297 Side Window Demisters A/C Air Filter — If Equipped A side window demister outlet is located at each end of The A/C Air Filter will reduce, but not eliminate, diesel the instrument panel. These non-adjustable outlets direct and agricultural smells.
• Page 300 298 UNDERSTANDING YOUR INSTRUMENT PANEL Control Setting Suggestions for Various Weather Conditions...
• Page 301 STARTING AND OPERATING CONTENTS Starting Procedures ..... 303 Automatic Transaxle ..... 306 Automatic Transaxle .
• Page 302 300 STARTING AND OPERATING All Wheel Drive (AWD) — If Equipped ..314 Electronic Roll Mitigation (ERM) ..326 Driving On Slippery Surfaces ....315 Electronic Stability Program (ESP) .
• Page 303 STARTING AND OPERATING 301 Tire Pressure Monitor System (TPMS) — If Cruising Range ..... . . 362 Equipped ......350 Replacement Parts .
• Page 304 302 STARTING AND OPERATING Adding Fuel ......367 Common Towing Definitions ... . . 372 Fuel Filler Cap (Gas Cap) .

Page 305: Starting Procedures

Page 306: automatic transaxle, page 307: if engine fails to start, page 308: after starting, page 309: brake/transaxle interlock system, page 310: automatic transaxle ignition interlock system.

• Page 311 STARTING AND OPERATING 309 Gear Ranges WARNING! PARK Never use PARK position on an Automatic Transaxle PARK supplements the parking brake by locking the as a substitute for the parking brake. Always apply transaxle. The engine can be started in this range. Never parking brake fully when parked to guard against attempt to use PARK while vehicle is in motion.
• Page 312 310 STARTING AND OPERATING NEUTRAL winds or while towing heavy trailers). Under these The engine may be started in this range. conditions, using the “5” range will improve perfor- mance and extend transaxle life by reducing excessive WARNING! shifting and heat build-up. “D”...
• Page 313 STARTING AND OPERATING 311 in this range. The “3” (Drive) range should also be used CAUTION! when descending steep grades to prevent brake system distress. If the transaxle operating temperature exceeds ac- ceptable limits, the vehicle computer will override NOTE: Using the “3” (Drive) range while operating the “D”...

Page 314: Autostick - If Equipped

Page 315: autostick operation, page 316: all wheel drive (awd) - if equipped, page 317: driving on slippery surfaces, page 318: driving through water.

• Page 319 STARTING AND OPERATING 317 CAUTION! CAUTION! • Always check the depth of the standing water • Driving through standing water may cause dam- before driving through it. Never drive through age to your vehicle’s drivetrain components. Al- standing water that is deeper than the bottom of ways inspect your vehicle’s fluids (i.e., engine oil, the tire rims mounted on the vehicle.

Page 320: Parking Brake

• Page 321 STARTING AND OPERATING 319 When parking on a hill, it is important to apply the parking brake before placing the shift lever in PARK, otherwise the load on the transaxle locking mechanism may make it difficult to move the shift lever out of PARK. As an added precaution, turn the front wheels toward the curb on a downhill grade and away from the curb on an uphill grade.
• Page 322 320 STARTING AND OPERATING The Brake System Warning Light in the instru- WARNING! ment cluster will turn on when the parking brake is applied and the ignition switch is on. • Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a NOTE: This light only shows that the parking brake is number of reasons.

Page 323: Brake System

Page 324: anti-lock brake system (abs), page 325: electronic brake control system.

• Page 326 324 STARTING AND OPERATING All vehicle wheels and tires must be the same size and WARNING! type and tires must be properly inflated to produce accurate signals for the computer. • The ABS contains sophisticated electronic equipment that may be susceptible to interference caused by improperly Anti-Lock Brake Light installed or high output radio transmitting equipment.

Page 327: Brake Assist System (Bas)

Page 328: traction control system (tcs), page 329: electronic stability program (esp).

• Page 330 328 STARTING AND OPERATING active. The ESP/TCS Indicator Light also flashes when ESP Operating Modes TCS is active. If the ESP/TCS Indicator Light begins to The ESP system has two available operating modes. flash during acceleration, ease up on the accelerator and Full On apply as little throttle as possible.

Page 331: Indicator Light

Page 332: trailer sway control (tsc), page 333: power steering, page 334: tire safety information.

• Page 335 STARTING AND OPERATING 333 Tire Sizing Chart TIRE SIZING TERMS Size Designation: P = Passenger Car tire size based on U.S. design standards ..blank..= Passenger Car tire based on European design standards LT = Light Truck tire based on U.S. design standards T = Temporary spare tire 31 = Overall diameter in inches (in) 215 = Section width in millimeters (mm)
• Page 336 334 STARTING AND OPERATING TIRE SIZING TERMS Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions —...
• Page 337 STARTING AND OPERATING 335 TIRE IDENTIFICATION NUMBER (TIN) Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If the TIN is not found on The TIN may be found on one or both sides of the tire, the outboard side, then you will find it on the inboard however, the date code may only be on one side.

Page 338: Tire Loading And Tire Pressure

• Page 339 STARTING AND OPERATING 337 Loading occupants and cargo should never exceed XXX kg or XXX The vehicle maximum load on the tire must not exceed lbs.” on the Tire and Loading Information placard. The the load carrying capacity of the tire on your vehicle. You combined weight of occupants, cargo/luggage and will not exceed the tire’s load carrying capacity if you trailer tongue weight (if applicable) should never exceed...
• Page 340 338 STARTING AND OPERATING 4. The resulting figure equals the available amount of manual to determine how this reduces the available cargo and luggage load capacity. For example, if “XXX” cargo and luggage load capacity of your vehicle. amount equals 1,400 lbs (635 kg) and there will be five NOTE: The following table shows examples on how to 150 lb (68 kg) passengers in your vehicle, the amount of calculate total load, cargo/luggage, and towing capaci-...
• Page 341 STARTING AND OPERATING 339...

Page 342: Tires - General Information

• Page 343 STARTING AND OPERATING 341 3. Ride Comfort and Vehicle Stability— WARNING! Proper tire inflation contributes to a comfortable ride. Over-inflation produces a jarring and uncomfortable •Unequal tire pressures can cause steering problems. ride. You could lose control of your vehicle. •Unequal tire pressures from one side of the vehicle Tire Inflation Pressures The proper cold tire inflation pressure is listed either on...
• Page 344 342 STARTING AND OPERATING CAUTION! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap (if equipped). This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Inflation pressures specified on the placard are always “cold tire inflation pressure.”...
• Page 345 STARTING AND OPERATING 343 Tire pressures change by approximately 1 psi (7 kPa) per loading may be required for high-speed vehicle opera- 12°F (7°C) of air temperature change. Keep this in mind tion. Refer to original equipment or an authorized tire when checking tire pressure inside a garage, especially in dealer for recommended safe operating speeds, loading the Winter.
• Page 346 344 STARTING AND OPERATING Radial Ply Tires vehicle only. Since this tire has limited tread life, the original tire should be repaired (or replaced) and rein- WARNING! stalled at the first opportunity. Combining radial ply tires with other types of tires WARNING! on your vehicle will cause your vehicle to handle •...
• Page 347 STARTING AND OPERATING 345 DO NOT install a wheel cover or attempt to mount a original equipped tire on the front or rear axle of your conventional tire on the compact spare wheel, since the vehicle, but it is not. Installation of this limited-use spare wheel is designed specifically for the compact spare.
• Page 348 346 STARTING AND OPERATING Tire Spinning Tread Wear Indicators When stuck in mud, sand, snow, or ice conditions, DO Tread wear indicators are in the original equipment tires to NOT spin your vehicle’s wheels faster than 30 mph (48 help you in determining when your tires should be replaced. km/h) or for longer than 30 seconds continuously with- out stopping when you are stuck.
• Page 349 STARTING AND OPERATING 347 Many states have laws requiring tire replacement at this Keep dismounted tires in a cool, dry place with as little point. exposure to light as possible. Protect tires from contact with oil, grease, and gasoline. Life of Tire The service life of a tire is dependent upon varying Replacement Tires factors including, but not limited to:...
• Page 350 348 STARTING AND OPERATING WARNING! WARNING! • NEVER use a tire with a smaller load index or DO NOT use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of capacity, other than what was originally equipped unapproved tires and wheels may change suspension on your vehicle.

Page 351: Tire Chains

Page 352: snow tires.

• Page 353 STARTING AND OPERATING 351 The tire pressure will also increase as the vehicle is may need to be driven for up to 10 minutes above 15 driven. This is normal and there should be no adjust- mph (25 km/h) in order for the TPMS to receive this ment for this increased pressure.
• Page 354 352 STARTING AND OPERATING NOTE: CAUTION! • The TPMS is not intended to replace normal tire care and maintenance, or to provide warning of a tire • The TPMS has been optimized for the original failure or condition. equipment tires and wheels. TPMS pressures and warning have been established for the tire size •...

Page 355: Base System - If Equipped

• Page 356 354 STARTING AND OPERATING will repeat, providing the system fault still exists. The NOTE: Tire Pressure Monitoring Telltale light will turn off when 1. The compact spare tire does not have a tire pressure the fault condition no longer exists. A system fault can monitoring sensor.

Page 357: Premium System - If Equipped

• Page 358 356 STARTING AND OPERATING Electronic Vehicle Information Center (EVIC) will display Should this occur, you should stop as soon as possible a graphic showing the pressure values of each tire with and inflate the tires with low pressure (those flashing in the low tire pressure values flashing.
• Page 359 STARTING AND OPERATING 357 1. Jamming due to electronic devices or driving next to facilities emitting the same radio frequencies as the TPMS sensors. 2. Installing some form of aftermarket window tinting that affects radio wave signals. 3. Lots of snow or ice around the wheels or wheel housings.

Page 360: General Information

Page 361: flexible fuel- 2.7l engines only, page 362: ethanol fuel (e-85), page 363: engine block heater (if equipped), page 364: starting, page 365: fuel requirements, page 366: reformulated gasoline, page 367: mmt in gasoline, page 368: materials added to fuel, page 369: carbon monoxide warnings.

• Page 370 368 STARTING AND OPERATING CAUTION! • Damage to the fuel system or emissions control system could result from using an improper fuel tank filler tube cap (gas cap). • A poorly fitting gas cap could let impurities into the fuel system. •...

Page 371: Loose Fuel Filler Cap Message

Page 372: vehicle loading, page 373: overloading, page 374: trailer towing.

• Page 375 STARTING AND OPERATING 373 Gross Trailer Weight (GTW) Gross Axle Weight Rating (GAWR) The Gross Trailer Weight (GTW) is the weight of the The Gross Axle Weight Rating (GAWR) is the maximum trailer plus the weight of all cargo, consumables, and capacity of the front and rear axles.
• Page 376 374 STARTING AND OPERATING Frontal Area of hitches are the most popular on the market today and Frontal area is the maximum height and maximum width they are commonly used to tow small- and medium- of the front of a trailer. sized trailers.
• Page 377 STARTING AND OPERATING 375 WARNING! • An improperly adjusted weight distributing hitch system may reduce handling, stability, braking performance, and could result in an accident. • Weight distributing systems may not be compatible with surge brake couplers. Consult with your hitch and trailer manufacturer or a reputable recreational vehicle dealer for additional information.

Page 378: Trailer Hitch Classification

Page 379: trailer towing weights (maximum trailer weight ratings).

• Page 380 378 STARTING AND OPERATING GCWR (Gross Com- Frontal Engine/Transaxle Max. GTW (Gross Trailer Wt.) Max. Tongue Wt. bined Wt. Rating) Area 40 sq ft 3,500 lbs (1,588 kg) which in- 8,300 lbs (3,765 kg) 350 lbs (159 kg) (3.7 sq m) cludes 1 to 2 persons &...

Page 381: Trailer And Tongue Weight

Page 382: towing requirements.

• Page 383 STARTING AND OPERATING 381 • Safety chains must always be used between your WARNING! vehicle and trailer. Always connect the chains to the frame or hook retainers of the vehicle hitch. Cross the Improper towing can lead to an injury accident. chains under the trailer tongue and allow enough Follow these guidelines to make your trailer towing slack for turning corners.
• Page 384 382 STARTING AND OPERATING 4. Tongue weight rating for the trailer hitch utilized. − Check for signs of tire wear or visible tire damage (This requirement may limit the ability to always before towing a trailer. Refer to “Tires–General Infor- achieve the 10% to 15% range of tongue weight as a mation”...
• Page 385 STARTING AND OPERATING 383 − An electronically actuated trailer brake controller is WARNING! required when towing a trailer with electronically actuated brakes. When towing a trailer equipped with Do not connect trailer brakes to your vehicle’s hy- a hydraulic surge actuated brake system, an electronic draulic brake lines.
• Page 386 384 STARTING AND OPERATING The Trailer Tow Package may include a 4- and 7-pin wiring harness. Use a factory approved trailer harness and connector. NOTE: Do not cut or splice wiring into the vehicles wiring harness. The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector.

Page 387: Towing Tips

• Page 388 386 STARTING AND OPERATING NOTE: Check the 4-speed automatic transaxle fluid Towing Tips — Autostick (If Equipped) level before towing. The 6-speed transaxle is sealed and − By using the Autostick modes and selecting a specific the fluid level cannot be checked. See your authorized gear range, frequent shifting can be avoided.

Page 389: Recreational Towing (Behind Motorhome, Etc.)

Page 391: what to do in emergencies, page 392: hazard warning flasher.

• Page 393 WHAT TO DO IN EMERGENCIES 391 heater core to act as a supplement to the radiator and aids WARNING! in removing heat from the engine cooling system. A hot engine cooling system is dangerous. You or CAUTION! others could be badly burned by steam or boiling coolant.

Page 394: Engine Oil Overheating - 2.4L Gas And 2.0L Diesel Engines Only (If Equipped)

Page 395: jack location, page 396: spare tire removal.

• Page 397 WHAT TO DO IN EMERGENCIES 395 seated on component 2. This will make it easier to rotate 4. Tilt the retainer at the end of the winch cable and the assembly when operating the winch mechanism. remove it from the center of the wheel. 2.

Page 398: Spare Tire Stowage

• Page 399 WHAT TO DO IN EMERGENCIES 397 NOTE: Assemble components 2 and 3 by seating the CAUTION! small ball at the end of component 2 in the small hole at the end of component 3. This will lock these components The winch mechanism is designed for use with the together.

Page 400: Jacking Instructions

• Page 401 WHAT TO DO IN EMERGENCIES 399 1. Remove the spare tire, jack, and jack-handle from WARNING! stowage. Carefully follow these tire changing warnings to help prevent 2. Loosen, but do not remove, the wheel nuts on the personal injury or damage to your vehicle: wheel with the flat tire.
• Page 402 400 WHAT TO DO IN EMERGENCIES Jack Engagement Locations...
• Page 403 WHAT TO DO IN EMERGENCIES 401 4. Raise the vehicle by turning the jack screw clockwise WARNING! with the jack handle. Raise the vehicle until the tire just clears the road surface and enough clearance is obtained To avoid possible personal injury, handle the wheel to install the spare tire.
• Page 404 402 WHAT TO DO IN EMERGENCIES • Refer to “Compact Spare Tire” and to “Limited-Use 9. Finish tightening the wheel nuts. Push down on the Spare” under “Tires — General Information” in Sec- wrench while tightening for increased leverage. Alternate tion 5 for additional warnings, cautions, and informa- wheel nuts until each nut has been tightened twice.
• Page 405 WHAT TO DO IN EMERGENCIES 403 11. Place the deflated (flat) tire in the cargo area. Do not Wheel Nuts stow the deflated tire in the spare tire stowage location. Tighten all wheel nuts occasionally to eliminate the Have the deflated (flat) tire repaired or replaced as soon possibility of wheel studs being sheared or the bolt holes as possible.

Page 406: Jump-Starting Procedures

• Page 407 WHAT TO DO IN EMERGENCIES 405 The battery is stored in a compartment that is located WARNING! behind the left front fender and is accessible through the wheel well. Remote jump-start terminals are located in Do not permit vehicles to touch each other as this the engine compartment.
• Page 408 406 WHAT TO DO IN EMERGENCIES 5. Connect the other cable, first to the negative terminal 6. If the vehicle is equipped with Sentry Key Immobi- of the booster battery and then to the engine ground (-) lizer, turn the ignition switch to the ON position for three of the vehicle with the discharged battery.
• Page 409 WHAT TO DO IN EMERGENCIES 407 WARNING! WARNING! During cold weather when temperatures are below Any procedure other than above could result in: freezing point, electrolyte in a discharged battery 1. Personal injury caused by electrolyte squirting out may freeze. Do not attempt jump-starting because the battery vent;...

Page 410: Freeing A Stuck Vehicle

Page 411: towing a disabled vehicle, page 412: towing this vehicle behind another vehicle, page 413: towing this vehicle behind another vehicle with a tow dolly, page 415: maintaining your vehicle.

• Page 416 414 MAINTAINING YOUR VEHICLE A/C Air Filter — If Equipped ... . 432 Front And Rear Wheel Bearings ... 449 Power Steering —...
• Page 417 MAINTAINING YOUR VEHICLE 415 License Plate Light ....467 Engine ......470 Fluids And Capacities .

Page 418: L Engine Compartment

Page 419: l engine compartment, page 420: l engine compartment, page 421: onboard diagnostic system - obd ii, page 422: emissions inspection and maintenance programs, page 423: replacement parts, page 424: authorized dealer service.

• Page 425 MAINTAINING YOUR VEHICLE 423 The best time to check the engine oil level is about five minutes after a fully warmed engine is shut off. Do not check oil level before starting the engine after it has sat overnight. Checking engine oil level when the engine is cold will give you an incorrect reading.
• Page 426 424 MAINTAINING YOUR VEHICLE Engine Oil Selection CAUTION! For best performance and maximum protection under all types of operating conditions, the manufacturer only Do not overfill the engine. Overfilling the engine recommends engine oils that are API Certified and meet will cause oil aeration, which can lead to loss of oil the requirements of Chrysler Material Standard MS-6395.
• Page 427 MAINTAINING YOUR VEHICLE 425 Engine Oil Viscosity (SAE Grade) — 2.4L and 2.7L The engine oil filler cap also shows the recommended Engines engine oil viscosity for your engine. For information on SAE 5W-20 engine oil is recommended for all operating engine oil filler cap location, refer to the “Engine Com- temperatures.

Page 428: Engine Oil Filter

Page 429: spark plugs.

• Page 430 428 MAINTAINING YOUR VEHICLE Under normal operating conditions, the catalytic con- NOTE: Intentional tampering with emissions control verter will not require maintenance. However, it is im- systems can result in civil penalties being assessed portant to keep the engine properly tuned to assure against you.

Page 431: Maintenance-Free Battery

• Page 432 430 MAINTAINING YOUR VEHICLE WARNING! CAUTION! • Battery fluid is a corrosive acid solution and can • It is essential when replacing the cables on the burn or even blind you. Don’t allow battery fluid battery that the positive cable is attached to the to contact your eyes, skin, or clothing.

Page 433: Air Conditioner Maintenance

Page 434: a/c air filter - if equipped.

• Page 435 MAINTAINING YOUR VEHICLE 433 Glove Box Removal A/C Air Filter Replacement 3. Pivot the glove box downward. 5. Remove the A/C air filter by pulling it straight out of the housing. 4. Disengage the two retaining tabs that secure the filter cover to the HVAC housing and remove the cover.

Page 436: Power Steering - Fluid Check

Page 437: front suspension ball joints, page 438: windshield washers/rear window washer, page 439: exhaust system, page 440: cooling system.

• Page 441 MAINTAINING YOUR VEHICLE 439 Cooling System — Drain, Flush, and Refill CAUTION! The system should be drained, flushed, and refilled at the intervals shown in the Maintenance Schedule in Section 8. • Mixing of coolants other than specified HOAT engine coolants, may result in engine damage and If the solution is dirty or contains a considerable amount may decrease corrosion protection.
• Page 442 440 MAINTAINING YOUR VEHICLE • Use only high purity water such as distilled or deion- Adding Coolant Your vehicle has been built with an improved engine ized water when mixing the water/engine coolant coolant that allows extended maintenance intervals. This solution.
• Page 443 MAINTAINING YOUR VEHICLE 441 The cap should be inspected and cleaned if there is any Disposal of Used Coolant accumulation of foreign material on the sealing surfaces. Used ethylene glycol-based engine coolant is a regulated substance requiring proper disposal. Check with your WARNING! local authorities to determine the disposal rules for your community.
• Page 444 442 MAINTAINING YOUR VEHICLE Six Cylinder Engines — the level of the coolant in the humidity accumulating on the radiator and being vapor- pressurized coolant bottle should be between the ized when the thermostat opens, allowing hot coolant to “COLD” and “FULL” range on the bottle when the enter the radiator.

Page 445: Hoses And Vacuum/Vapor Harnesses

Page 446: fuel system.

• Page 447 MAINTAINING YOUR VEHICLE 445 Ensure nylon tubing in these areas has not melted or immediately. Eventual deterioration of the hose can collapsed. take place, resulting in a possibility of a burst failure. Inspect all hose clamps and couplings to make sure they WARNING! are secure and no leaks are present.
• Page 448 446 MAINTAINING YOUR VEHICLE Clean the top of the master cylinder area before removing WARNING! the cap. If necessary, add fluid to bring the fluid level up to the requirements described on the brake fluid reser- • Overfilling the brake fluid reservoir can result in voir.

Page 449: Automatic Transaxle

• Page 450 448 MAINTAINING YOUR VEHICLE driven at least 15 mi (24 km). Hot fluid cannot be held CAUTION! comfortably between the fingertips. Cold fluid is at a temperature below 80°F (27°C). • Using a transmission fluid other than the manu- facturer’s recommended fluid may cause deterio- 7.

Page 451: Front And Rear Wheel Bearings

• Page 452 450 MAINTAINING YOUR VEHICLE • Salt in the air near seacoast localities. corrosive to the metal in your vehicle. Outside parking, which exposes your vehicle to airborne contaminants, • Atmospheric fallout/industrial pollutants. road surfaces on which the vehicle is operated, extreme hot or cold weather and other extreme conditions will Washing have an adverse effect on paint, metal trim, and under-...
• Page 453 MAINTAINING YOUR VEHICLE 451 • If your vehicle is damaged due to an accident or CAUTION! similar cause, which destroys the paint and protective coating, have your vehicle repaired as soon as pos- Do not use abrasive or strong cleaning materials such sible.
• Page 454 452 MAINTAINING YOUR VEHICLE heavy soil and/or excessive brake dust, use Mopar Mopar Spot & Stain Remover if absolutely necessary. Do Wheel Cleaner (05066247AB) or equivalent or select a not use harsh cleaners or Armorall . Use Mopar Total nonabrasive, non-acidic cleaner. Do not use scouring Clean to clean vinyl upholstery pads, steel wool, a bristle brush, or metal polishes.
• Page 455 MAINTAINING YOUR VEHICLE 453 • For grease stains, apply Mopar Multi-Purpose WARNING! Cleaner to a clean, damp cloth and remove stain. Use a fresh, damp towel to remove soap residue. Do not use volatile solvents for cleaning purposes. • Do not use any solvents or protectants on Yes Essen- Many are potentially flammable, and if used in closed areas they may cause respiratory harm.

Page 456: Cleaning The Cupholders

Page 457: fuses (totally integrated power module).

• Page 458 456 MAINTAINING YOUR VEHICLE Cartridge Mini- Cartridge Mini- Cavity Description Cavity Description Fuse Fuse Fuse Fuse 40 Amp Power Folding Seat 40 Amp Flex Fuel/PZEV Motor - if — — Green Green equipped 30 Amp Transfer Case Module - if 30 Amp (If Equipped) Headlamp —...
• Page 459 MAINTAINING YOUR VEHICLE 457 Cartridge Mini- Cartridge Mini- Cavity Description Cavity Description Fuse Fuse Fuse Fuse 60 Amp Radiator Fan Motor 20 Amp Power Outlet #1/Accessory — — Yellow Yellow (ACC) Rain Sensor 30 Amp Front Windshield Wiper Hi/ 20 Amp Power Outlet #2 (Battery or —...
• Page 460 458 MAINTAINING YOUR VEHICLE Cartridge Mini- Cartridge Mini- Cavity Description Cavity Description Fuse Fuse Fuse Fuse 10 Amp Automatic Temperature 15 Amp Left Park/Side Marker/ — Control (ATC) - if equipped, — Blue Running/Tail Lights, License Underhood Light Lights 30 Amp Radio, Amplifier (AMP) 15 Amp Right Park/Side Marker/...
• Page 461 MAINTAINING YOUR VEHICLE 459 Cartridge Mini- Cartridge Mini- Cavity Description Cavity Description Fuse Fuse Fuse Fuse 20 Amp Fuel Pump/Diesel Lift 10 Amp NGC (Powertrain Control — — Yellow Pump Module) Battery Feed 10 Amp Power MIRRORS Switch/ 10 Amp Power Assist Module, —...

Page 462: Vehicle Storage

• Page 463 MAINTAINING YOUR VEHICLE 461 LIGHT BULBS — Interior Bulb Number LIGHTS BULBS — Outside Bulb No. Courtesy/Reading Lights Low Beam Headlight ..... 9006 (Incandescent) .

Page 464: Bulb Replacement

Page 465: front fog light, page 466: tail/stop light, rear turn signal light, tail light, backup light.

• Page 467 MAINTAINING YOUR VEHICLE 465 4. Rotate the applicable bulb’s electrical connector ⁄ 6. Install the bulb and connector assembly into the turn counterclockwise and remove it from the taillight taillight housing and rotate the connector ⁄ turn clock- housing. wise to lock it in place. 7.
• Page 468 466 MAINTAINING YOUR VEHICLE 4. Rotate the applicable bulb’s electrical connector ⁄ 5. Remove the bulb from the connector socket and install turn counterclockwise and remove it from the housing. the replacement bulb. 6. Install the bulb and connector assembly into the housing and rotate the connector ⁄...
• Page 469 MAINTAINING YOUR VEHICLE 467 License Plate Light 2. Insert a small flat-blade tool between the end of the lens with the locking tab and the surrounding housing 1. Push the small locking tab sticking out of the end of and then pivot the tool to separate the lens from the the lens toward the side of the vehicle and hold it in that housing.
• Page 470 468 MAINTAINING YOUR VEHICLE FLUIDS AND CAPACITIES Component U.S. Metric Fuel (approximate) Front Wheel Drive (FWD) Models with 2.4 Liter PZEV Engine 18.5 gal 70 l FWD Models without 2.4 Liter PZEV Engine 20.5 gal 77.6 l All-Wheel Drive Models 21.1 gal 79.8 l Engine Oil with Filter...
• Page 471 MAINTAINING YOUR VEHICLE 469 Component U.S. Metric 2.7 Liter Engine and Three-Zone Climate Control System (Mopar 12 qts 11.4 l Antifreeze/Coolant 5 Year/100,000 Mile Formula) or equivalent 3.5 Liter Engine and Single- or Dual-Zone Climate Control System (Mo- 9.8 qts 9.3 l par Antifreeze/Coolant 5 Year/100,000 Mile Formula) or equivalent 3.5 Liter Engine and Three-Zone Climate Control System (Mopar...
• Page 472 470 MAINTAINING YOUR VEHICLE FLUIDS, LUBRICANTS, AND GENUINE PARTS Engine Component Fluids, Lubricants, and Genuine Parts Mopar Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Engine Coolant Organic Additive Technology) or equivalent Use API Certified SAE 5W-20 Engine Oil meeting the requirements of Engine Oil (2.4L) Chrysler Material Standard MS-6395.
• Page 473 MAINTAINING YOUR VEHICLE 471 Component Fluids, Lubricants, and Genuine Parts Spark Plugs (2.7L) RE14PMC5 (Gap.050 in [1.27 mm]) Spark Plugs (3.5L) ZFR5LP-13G (Gap.050 in [1.27 mm]) Fuel Selection (2.4L) 87 Octane Fuel Selection (2.7L) 87 Octane Fuel Selection (2.7L - EXCEPT CALI- E-85 Ethanol FORNIA EMISSION STATES) Fuel Selection (3.5L)
• Page 474 472 MAINTAINING YOUR VEHICLE Chassis Component Fluids, Lubricants and Genuine Parts Automatic Transaxle Mopar ATF+4 Automatic Transmission Fluid Power Transfer Unit (PTU) Mopar Gear Lubricant 75W-90 or equivalent Rear Drive Assembly (RDA) Mopar Gear Lubricant 75W-90 or equivalent. Mopar DOT 3, SAE J1703 or equivalent should be used. If DOT 3 brake Brake Master Cylinder fluid is not available, then DOT 4 is acceptable.
• Page 475 MAINTENANCE SCHEDULES CONTENTS Emissions Control System Maintenance ..474 Maintenance Service Schedule ... . 477 Maintenance Schedule ....474...
• Page 476 474 MAINTENANCE SCHEDULES EMISSIONS CONTROL SYSTEM MAINTENANCE MAINTENANCE SCHEDULE The Scheduled Maintenance services listed in bold type, The oil change indicator system will remind you that it is must be done at the times or mileages specified to ensure time to take your vehicle in for scheduled maintenance. the continued proper functioning of the Emissions Con- On Electronic Vehicle Information Center (EVIC) trol System.
• Page 477 MAINTENANCE SCHEDULES 475 NOTE: Your authorized dealer will reset the oil change indicator • The oil change indicator message will not monitor the message after completing the scheduled oil change. If this time since the last oil change. Change your vehicles oil scheduled oil change is performed by someone other if it has been six months since your last oil change, than your authorized dealer, the message can be reset by...
• Page 478 476 MAINTENANCE SCHEDULES At Each Stop for Fuel At Each Oil Change • Check the engine oil level. Refer to “Engine Oil” under • Change the engine oil filter. “Maintenance Procedures” in Section 7. • Inspect the brake hoses and lines. •...
• Page 479 MAINTENANCE SCHEDULES 477 6,000 Miles (10,000 km) or 6 Months 12,000 Miles (20,000 km) or 12 Months 18,000 Miles (30,000 km) or 18 Months Maintenance Service Schedule Maintenance Service Schedule Maintenance Service Schedule Change the engine oil and engine oil filter. Change the engine oil and engine oil filter.
• Page 480 478 MAINTENANCE SCHEDULES 24,000 Miles (40,000 km) or 24 Months 30,000 Miles (50,000 km) or 30 Months 36,000 Miles (60,000 km) or 36 Months Maintenance Service Schedule Maintenance Service Schedule Maintenance Service Schedule Change the engine oil and engine oil filter. Change the engine oil and engine oil filter.
• Page 481 MAINTENANCE SCHEDULES 479 42,000 Miles (70,000 km) or 42 Months 48,000 Miles (80,000 km) or 48 Months 54,000 Miles (90,000 km) or 54 Months Maintenance Service Schedule Maintenance Service Schedule Maintenance Service Schedule Change the engine oil and engine oil filter. Change the engine oil and engine oil filter.
• Page 482 480 MAINTENANCE SCHEDULES 60,000 Miles (100,000 km) or 60 Months 66,000 Miles (110,000 km) or 66 Months Maintenance Service Schedule Maintenance Service Schedule Change the engine oil and engine oil filter. Change power transfer unit (PTU) fluid. Change the engine oil and engine oil filter. Rotate the tires.
• Page 483 MAINTENANCE SCHEDULES 481 72,000 Miles (120,000 km) or 72 Months 78,000 Miles (130,000 km) or 78 Months 84,000 Miles (140,000 km) or 84 Months Maintenance Service Schedule Maintenance Service Schedule Maintenance Service Schedule Change the engine oil and engine oil filter. Change the engine oil and engine oil filter.
• Page 484 482 MAINTENANCE SCHEDULES 90,000 Miles (150,000 km) or 90 Months 96,000 Miles (160,000 km) or 96 Months 102,000 Miles (170,000 km) or Maintenance Service Schedule Maintenance Service Schedule 102 Months Maintenance Service Schedule Change the engine oil and engine oil filter. Change the engine oil and engine oil filter.
• Page 485 MAINTENANCE SCHEDULES 483 108,000 Miles (180,000 km) or 114,000 Miles (190,000 km) or 114 Months 108 Months Maintenance Service Schedule Maintenance Service Schedule Change the engine oil and engine oil filter. Change the engine oil and engine oil filter. Rotate the tires. Rotate the tires.
• Page 486 484 MAINTENANCE SCHEDULES 120,000 Miles (200,000 km) or 120 Months Maintenance Service Schedule Change the engine oil and engine oil filter. Change rear drive assembly (RDA) fluid. Rotate the tires. Change power transfer unit (PTU) fluid. Inspect the brake linings, and replace if necessary. Change the automatic transmission fluid and Replace the air conditioning filter (if equipped).
• Page 487 IF YOU NEED CONSUMER ASSISTANCE CONTENTS Suggestions For Obtaining Service For Customer Assistance For The Hearing Or Your Vehicle ......487 Speech Impaired (TDD/TTY) .
• Page 488 486 IF YOU NEED CONSUMER ASSISTANCE Publication Order Forms ....492 Traction Grades ..... . 493 Department Of Transportation Uniform Temperature Grades .

Page 489: Suggestions For Obtaining Service For Your Vehicle

Page 490: chrysler llc customer center, page 491: in mexico contact, page 492: warranty information (u.s. vehicles only), page 493: mopar parts, page 494: publication order forms, page 495: traction grades, page 496: department of transportation uniform temperature grades.

• Page 497 INDEX...
• Page 498 496 INDEX About Your Brakes ....318,321 Airbag Maintenance ..... . . 61 ABS (Anti-Lock Brake System) .
• Page 499 INDEX 497 Audio Systems (Radio) ....232,262 Auxiliary Electrical Outlet (Power Outlet) ..172 Auto Down Power Windows ....35 Auxiliary Power Outlet .
• Page 500 498 INDEX Brake Assist Warning Light ....214 Camera, Rear ......88 Brake Control System, Electronic .
• Page 501 INDEX 499 Cargo (Vehicle Loading) ....186,370 Cleaning Catalytic Converter ..... . 427 Wheels .
• Page 502 500 INDEX Contract, Service ......489 Cup Holder ......176,454 Converter, Catalytic .
• Page 503 INDEX 501 Disposal Brake Assist System ....325 Antifreeze (Engine Coolant) ....441 Electronic Roll Mitigation .
• Page 504 502 INDEX Block Heater ......306 Overheating ......390 Break-In Recommendations .
• Page 505 INDEX 503 Automatic Transaxle ....449 Fluid Level Checks Engine Oil ......426,470 Automatic Transaxle .
• Page 506 504 INDEX Ethanol ......364 Gas Gauge (Fuel Gauge) ....203 Filler Cap (Gas Cap) .
• Page 507 INDEX 505 Hands-Free Phone (UConnect™) ..89,262,263 Time Delay ......145 Hard Drive (HDD) .
• Page 508 506 INDEX Immobilizer (Sentry Key) ....15 Jack Location ......393 Indicator, Traction Control .
• Page 509 INDEX 507 Latches ....... . 77 Cargo ......150 Hood .
• Page 510 508 INDEX Instrument Cluster ....144,203 Tire Pressure Monitoring (TPMS) ..210,350 Intensity Control ..... . . 150 Traction Control .
• Page 511 INDEX 509 Luggage Rack (Roof Rack) ....194 Exterior Folding ......86 Lumbar Support .
• Page 512 510 INDEX Octane Rating, Gasoline (Fuel) ... . 363,470 Oil Filter, Selection ..... . . 426 Odometer Onboard Diagnostic System .
• Page 513 INDEX 511 Phone, Hands-Free (UConnect™) ..89,262,263 Pregnant Women and Seat Belts ....48 Placard, Tire and Loading Information ..336 Preparation for Jacking .
• Page 514 512 INDEX Rear Seat, Folding ....130,140 Remote Keyless Entry (RKE) ....20 Rear Washer Fluid .
• Page 515 INDEX 513 Safety Defects, Reporting ....491 Reminder ......206 Safety, Exhaust Gas .
• Page 516 514 INDEX Selection of Coolant (Antifreeze) ..439,470 Side Window Demisters (Defrosters) ..297 Selection of Oil ......424 Signals, Turn .
• Page 517 INDEX 515 Starting and Operating ....303 Sway Control, Trailer ....330,374 Starting Procedures .
• Page 518 516 INDEX Tire Markings ......332 Safety ......332,340 Tire Safety Information .
• Page 519 INDEX 517 Traction Control ..... . 213,326 Selection of Lubricant ....472 Trailer Sway Control (TSC) .
• Page 520 518 INDEX Universal Serial Bus (USB) Port ... 232,262 Voice Recognition System (VR) ....116 Universal Transmitter ..... 161 Unleaded Gasoline .
• Page 521 INDEX 519 Window Fogging ......296 Wiper Blade Replacement ....435,436 Windows .
• Page 522 INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this The antenna cable should be as short as practical and vehicle’s electronic system to provide immunity to radio routed away from the vehicle wiring when possible. Use frequency signals. Mobile two-way radios and telephone only fully shielded coaxial cable.
• Page 523 Second Edition Printed in U.S.A.

Rename the bookmark

Delete bookmark, delete from my manuals, upload manual.

• Find a Repair Guide
• Ask the Experts
• Auto Repair Blog

Select your Dodge Journey PDF Download from the list below:

Dodge - journey - workshop manual - (1985), get your hands on the complete dodge factory workshop software, dodge - journey fwd - workshop manual - 1985 - 1985, rvs & accessories - winnebago - 2002 journey dl, rvs & accessories - winnebago - 2002 journey, rvs & accessories - winnebago - 2007 journey, rvs & accessories - winnebago - 2007 journey se, dodge - journey - sales brochure - 2008 - 2008, dodge journey fwd workshop manual (v6-3.5l (2009)), dodge journey awd workshop manual (v6-3.5l (2009)), dodge - journey - owners manual - 2009 - 2009, dodge - journey - sales brochure - 2009 - 2018 (spanish), best ipad holder for car, dodge - journey - sales brochure - 2009 - 2009, dodge - journey fwd - workshop manual - 2009 - 2009, dodge - journey awd - workshop manual - 2009 - 2009, best back seat organizer, dodge - journey - workshop manual - 2010 - 2010, dodge - journey - owners manual - 2010 - 2010, rvs & accessories - winnebago - 2010 journey, rvs & accessories - winnebago - 2010 journey express, dodge - journey - sales brochure - 2010 - 2010, dodge - journey fwd - workshop manual - 2010 - 2010, dodge journey fwd workshop manual (l4-2.4l (2011)), dodge - journey - workshop manual - (2011), dodge - journey - owners manual - 2011 - 2011, dodge - journey - sales brochure - 2011 - 2015, dodge - journey fwd - workshop manual - 2011 - 2011, dodge - journey - owners manual - 2012 - 2012, dodge - journey - sales brochure - 2012 - 2012, dodge - journey - sales brochure - 2012 - 2013, dodge - auto - dodge-journey-2013-manuel-du-proprietaire-90754, dodge - auto - dodge-journey-2013-manuel-du-proprietaire-90754_5d8a7f75326d05a10413981, dodge - journey - sales brochure - 2013 - 2014, dodge - journey - sales brochure - 2013 - 2013 (3), dodge - journey - sales brochure - 2013 - 2013 (2), dodge - journey - sales brochure - 2014 - 2014, dodge - journey - owners manual - 2015 - 2015, dodge - journey - sales brochure - 2015 - 2015, dodge - journey - sales brochure - 2015 - 2015 (2), dodge - journey - sales brochure - 2015 - 2015 (3), dodge - journey - owners manual - 2016 - 2016, dodge - journey - sales brochure - 2016 - 2016, dodge - journey - sales brochure - 2016 - 2016 (3), dodge - journey - sales brochure - 2016 - 2016 (5), dodge - journey - sales brochure - 2016 - 2016 (4), dodge - journey - sales brochure - 2016 - 2016 (2), dodge - journey - owners manual - 2017 - 2017, dodge - journey - sales brochure - 2017 - 2017, dodge - journey - sales brochure - 2017 - 2018 (2), dodge - journey - sales brochure - 2017 - 2017 (2), dodge - journey - sales brochure - 2017 - 2017 (4), dodge - journey - sales brochure - 2017 - 2017 (3), dodge - journey - owners manual - 2018 - 2018 (2), dodge - journey - owners manual - 2018 - 2018, dodge - journey - sales brochure - 2018 - 2018, 53 dodge journey workshop, owners, service and repair manuals, updated - february 24.

We have 53 Dodge Journey manuals covering a total of 33 years of production. In the table below you can see 2 Journey Workshop Manuals,0 Journey Owners Manuals and 25 Miscellaneous Dodge Journey downloads.

Our most popular manual is the Dodge Journey Fwd Workshop Manual (V6-3.5L (2009)) . This (like all of our manuals) is available to download for free in PDF format.

How to download a Dodge Journey Repair Manual (for any year)

These Journey manuals have been provided by our users, so we can’t guarantee completeness. We’ve checked the years that the manuals cover and we have Dodge Journey repair manuals for the following years; 1985, 2002, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018.

Go through the 53 different PDF’s that are displayed below, for example this one. You’ll then be shown the first 10 pages of this specific document, you can then scroll down and click ‘show full PDF’ . Then you can click download you’ve got a totally free car manual, forever!

What topics does the Dodge Journey Service/Repair Manual cover?

In total, that's over 67355 pages of content dedicated to your Dodge Journey . Here’s a non exhaustive list of what’s covered;

• Dodge Journey service manual for roadside repairs
• Dodge Journey owners manual covering weekly checks
• Dodge Journey workshop manual covering Lubricants, fluids and tyre pressures
• Dodge Journey service PDF's covering routine maintenance and servicing
• Detailed Dodge Journey Engine and Associated Service Systems (for Repairs and Overhaul) (PDF)
• Dodge Journey Transmission data Service Manual PDF
• Dodge Journey Brakes and suspension PDF
• Dodge Journey Wiring Diagrams

Looking for a Free Dodge Journey Haynes / Dodge Journey Chilton Manuals?

We get a lot of people coming to the site looking to get themselves a free Dodge Journey Haynes manual. There are two things you need to know; firstly it’s illegal , and secondly - there are much better ways of servicing and understanding your Dodge Journey engine than the Haynes manual. That’s essentially what we’re here for - to give you an alternative to the Haynes and Chilton, online and totally for free.

We'll send you a quick email a new Dodge Journey document is added. Spam free: Maximum of 1 email per month

Get notified when we add a new DodgeJourney Manual

We cover 60 dodge vehicles, were you looking for one of these.

Dodge Ram 1500 4wd Workshop Manual (Truck V8-5.9L VIN Z (2002))

Dodge grand caravan workshop manual (v6-3.3l vin r (2005)), dodge - ram - wiring diagram - 1984 - 1985, dodge caliber workshop manual (l4-2.4l (2009)), 2003 dodge ram factory service manual, 2005 dodge ram truck 1500-2500-3500 service & repair manual, dodge - ram - repair guide - ( 2008), 2006-2008--dodge--charger--6 cylinders r 2.7l mfi dohc--33235903, dodge - charger - wiring diagram - 2006 - 2010, dodge neon workshop manual (l4-2.0l vin f ho (2003)), dodge - dakota - wiring diagram - 1996 - 1998, dodge stratus sedan workshop manual (v6-2.7l (2001)), dodge dakota 4wd workshop manual (v8-4.7l vin n (2000)), dodge - nitro - wiring diagram - 2007 - 2008, dodge challenger workshop manual (v8-5.7l (2010)), dodge avenger workshop manual (v6-3.5l (2008)), dodge - magnum - wiring diagram - 2005 - 2010 (2), dodge intrepid workshop manual (v6-3.2l vin j (1998)), dodge - ramcharger - wiring diagram - 1988 - 1989, dodge durango 4wd workshop manual (v8-4.7l flex fuel (2008)), dodge dakota 2wd workshop manual (v6-239 3.9l magnum (1996)), dodge avenger workshop manual (v6-2.7l flex fuel (2009)), dodge ram 1500 van workshop manual (v8-5.2l vin y (1999)), dodge caravan fwd workshop manual (v6-3.8l vin l (1999)), dodge ram 1500 4wd workshop manual (truck v8-5.7l vin d (2005)), dodge ram 1500 4wd workshop manual (truck v8-4.7l (2008)), dodge b350 1 ton van workshop manual (v8-5.9l vin z (1992)), dodge viper srt-10 workshop manual (v10-8.4l (2008)), dodge ram 1500 2wd workshop manual (truck v8-5.7l vin 2 (2006)), dodge magnum workshop manual (v8-5.7l vin h (2005)), dodge caliber srt-4 workshop manual (l4-2.4l turbo vin f (2007)), 1999-2005--dodge--stratus--6 cylinders r 2.7l mfi dohc--32856807, dodge ram 2500 4wd workshop manual (truck l6-359 5.9l dsl turbo vin d fi (1998)), dodge durango 4wd workshop manual (v8-5.9l vin z (1998)), dodge grand caravan workshop manual (v6-201 3.3l (1994)), 2006-2008--dodge--magnum--6 cylinders v 3.5l fi sohc ho--33246402, dodge ram 2500 4wd workshop manual (truck l6-6.7l dsl turbo vin a (2007)), dodge dynasty workshop manual (v6-181 3.0l sohc (1991)), dodge - ram pick-up - wiring diagram - 1981 - 1985, dodge dakota 2wd workshop manual (v8-4.7l vin n (2001)), dodge grand caravan workshop manual (v6-4.0l (2008)), dodge stratus sedan workshop manual (l4-2.4l vin x (2003)), dodge ram 3500 van workshop manual (v8-5.9l vin z ldc (1998)), dodge - auto - dodge-grand-caravan-2016-manual-del-propietario-101971, dodge durango 2wd workshop manual (v8-5.2l vin y (1999)), dodge ram 1500 van workshop manual (v8-5.9l vin z (1998)), dodge avenger workshop manual (l4-2.0l dohc (1995)), dodge - ram - workshop manual - 1994 - 2015, dodge stratus coupe workshop manual (l4-2.4l vin g (2003)), dodge ram 3500 hd 4wd workshop manual (truck l6-6.7l dsl turbo vin a (2007)), dodge dakota quad cab 4wd workshop manual (v6-3.9l vin x (2001)), dodge ram 2500 4wd workshop manual (truck l6-6.7l dsl turbo (2008)), 2002 dodge caravan workshop manual in pdf, dodge charger workshop manual (v6-2.7l (2008)), dodge durango 4wd workshop manual (v8-5.7l hybrid (2009)), dodge neon workshop manual (l4-122 2.0l dohc vin y sfi (1997)), 2002 dodge ram workshop repair manual, dodge dakota 2wd workshop manual (v6-3.9l vin x (1997)), 2001-2005--dodge--dakota 4wd--6 cylinders x 3.9l fi ohv--32720001, dodge viper workshop manual (v10-488 8.0l (1992)).

2009 Dodge Journey Service and Repair Manual

Online service and repair manual for the 2009 Dodge Journey

Information based on factory service and repair materials

Access from anywhere using your PC or mobile device

100% money-back satisfaction guarantee

Instant access 24/7

Flexible plans

Real-time updates

The convenient, cloud-based 2009 Dodge Journey service and repair manual

The 2009 Dodge Journey service and repair manual from Repair Surge is the ultimate reference guide. It provides accurate, reliable information based on the original service materials from the manufacturer. You'll get procedures, specifications, part numbers, illustrations, wiring diagrams, and more. Whether you're an industry professional or a DIY mechanic, it's the perfect addition to any toolbox.

Covers the following trim packages for the 2009 Journey :

R/T, 3.5L V6 (VIN V) Gas

SE, 2.4L L4 (VIN B, ED3) Gas

SE, 2.4L L4 (VIN B, EDG) Gas

SXT, 3.5L V6 (VIN V) Gas

Everything you need for a successful repair

Service and Repair Procedures

Specifications

Parts Numbers and Illustrations

Component Locations

Fluids and Lubricants

Wiring Diagrams

Technical Service Bulletins

Vehicle and Equipment Recalls

Maintenance Schedules

Estimated Labor Times

Diagnostics and Troubleshooting

Safety Precautions

Other Dodge Journey Years

2020 Dodge Journey Manual

2019 Dodge Journey Manual

2018 Dodge Journey Manual

2017 Dodge Journey Manual

2016 Dodge Journey Manual

2015 Dodge Journey Manual

2014 Dodge Journey Manual

2013 Dodge Journey Manual

2012 Dodge Journey Manual

2011 Dodge Journey Manual

2010 Dodge Journey Manual

Other 2009 Dodge Models

2009 Dodge Avenger Manual

2009 Dodge Caliber Manual

2009 Dodge Challenger Manual

2009 Dodge Charger Manual

2009 Dodge Dakota Manual

2009 Dodge Durango Manual

2009 Dodge Grand Caravan Manual

2009 Dodge Nitro Manual

2009 Dodge Ram 1500 Manual

2009 Dodge Ram 2500 Manual

2009 Dodge Ram 3500 Manual

2009 Dodge Ram 4500 Manual

2009 Dodge Ram 5500 Manual

2009 Dodge Sprinter 2500 Manual

2009 Dodge Sprinter 3500 Manual

2009 Dodge Viper Manual

Dodge Journey Undercarriage Diagram

Knowing the ins and outs of your vehicle’s undercarriage is crucial for any car owner. It not only helps you understand how your Dodge Journey works but also enables you to identify potential problems and take preventive measures. In this comprehensive guide, we will provide you with a detailed diagram of the Dodge Journey undercarriage, highlighting all the important components and their functions.

1. Frame: The frame forms the backbone of your Dodge Journey’s undercarriage. It is a sturdy structure that provides support and rigidity to the entire vehicle. The frame is made of high-strength steel, ensuring durability and safety.

2. Suspension System: The suspension system of your Dodge Journey consists of various components, including the shocks, struts, control arms, and sway bars. These components work together to absorb the impact from the road, providing a smooth and comfortable ride.

3. Drivetrain: The drivetrain of your Dodge Journey is responsible for transmitting power from the engine to the wheels. It consists of the transmission, driveshaft, differential, and axles. Understanding how the drivetrain works can help you diagnose and fix any issues related to power transfer.

4. Exhaust System: The exhaust system of your Dodge Journey is responsible for removing the gases produced during the combustion process. It consists of the exhaust manifold, catalytic converter, muffler, and tailpipe. A properly functioning exhaust system is essential for maintaining fuel efficiency and reducing pollution.

5. Brake System: The brake system of your Dodge Journey is crucial for ensuring your safety on the road. It consists of components such as the brake calipers, rotors, pads, and brake lines. Understanding how the brake system works will enable you to identify any issues and take necessary actions.

By familiarizing yourself with the undercarriage diagram of your Dodge Journey, you can become a more knowledgeable and confident car owner. It will help you identify potential problems and understand how different components work together to provide a smooth and safe driving experience. Regular inspections and maintenance of the undercarriage will ensure the longevity and reliability of your Dodge Journey.

Dodge Journey Undercarriage Diagram: A Complete Guide and Diagrams

The undercarriage of a Dodge Journey is an essential part of the vehicle that provides support and protection. Understanding the components and layout of the undercarriage can help you identify potential issues and perform maintenance tasks efficiently.

Front Undercarriage

The front undercarriage of a Dodge Journey consists of several key components. The engine compartment houses the engine, transmission, and various fluid reservoirs. The front suspension system, including control arms, struts, and sway bars, ensures a smooth and stable ride. The brakes, wheels, and steering components are also located in the front undercarriage.

Rear Undercarriage

The rear undercarriage of a Dodge Journey is primarily focused on supporting the rear suspension system. Similar to the front undercarriage, it includes control arms, struts, and sway bars. The fuel tank and exhaust system are also located in the rear undercarriage. Proper maintenance of these components is essential for optimal performance and safety.

Regular inspections and maintenance of the Dodge Journey undercarriage are crucial to prolonging the lifespan of your vehicle. This includes checking for any signs of damage or wear, ensuring proper lubrication, and addressing any issues promptly. By understanding the undercarriage diagram and its components, you can better maintain and care for your Dodge Journey.

Importance of Understanding the Undercarriage

When it comes to owning and maintaining a Dodge Journey, understanding the undercarriage is of utmost importance. The undercarriage refers to the underside of the vehicle, including the frame, suspension, exhaust system, and many other essential components. Having a good understanding of the undercarriage can help you identify any potential issues and ensure the overall health and safety of your vehicle.

One of the main reasons why understanding the undercarriage is crucial is because it houses several important components that contribute to the vehicle’s performance and safety. For example, the suspension system plays a critical role in providing a smooth and comfortable ride, while also ensuring proper handling and stability. By knowing how the suspension system works and what to look for, you can identify any signs of wear or damage and take appropriate action to address them.

Another vital component located in the undercarriage is the exhaust system. The exhaust system is responsible for removing harmful gases from the engine and reducing noise levels. By understanding how the exhaust system is designed and what to inspect, you can identify any leaks or damage that may compromise its performance and overall functionality.

Additionally, the undercarriage houses the transmission system, which is responsible for transferring power from the engine to the wheels. Understanding how the transmission system operates and what to look for can help you detect any issues early on and prevent costly repairs down the line.

Regular inspection and maintenance of the undercarriage is also important for ensuring the longevity of your Dodge Journey. By regularly inspecting key undercarriage components, such as the brakes, steering system, and fuel system, you can identify any signs of wear or deterioration and address them before they become major problems. This proactive approach can save you time, money, and potential safety hazards.

In conclusion, understanding the undercarriage of your Dodge Journey is vital for maintaining its performance, safety, and longevity. By familiarizing yourself with the various components and systems located in the undercarriage, you can detect any issues early on and take the necessary steps to address them. Whether it’s conducting regular inspections or seeking professional help, prioritizing the understanding of your vehicle’s undercarriage can go a long way in ensuring a smooth and trouble-free driving experience.

Exploring the Various Components of the Undercarriage

The undercarriage of a Dodge Journey is composed of several important components that work together to ensure the vehicle’s stability and safety. Understanding these components can help you better maintain and troubleshoot your vehicle.

The frame is the foundation of the undercarriage and provides structural support for the entire vehicle. It is typically made of steel and is designed to withstand various impacts and stresses. Regular inspections should be done to check for any signs of damage or corrosion to ensure the frame remains strong and secure.

Suspension System

The suspension system plays a critical role in providing a smooth and comfortable ride. It consists of various components, including control arms, bushings, springs, shocks, and struts. These components work together to absorb shocks from the road and maintain contact between the tires and the road surface.

Regular inspections and maintenance are essential to ensure the suspension system is working properly. Signs of a faulty suspension system include uneven tire wear, abnormal noises while driving, and a rough ride.

Exhaust System

The exhaust system is responsible for routing and removing the exhaust gases from the engine. It consists of several components, including the exhaust manifold, catalytic converter, muffler, and tailpipe. It is crucial to keep the exhaust system in good condition to ensure proper engine performance and reduce harmful emissions.

Regular inspections are necessary to check for any leaks, damage, or excessive rusting in the exhaust system. Signs of a faulty exhaust system include loud noises, reduced fuel efficiency, and the smell of exhaust fumes inside the vehicle.

The drivetrain is responsible for transmitting power from the engine to the wheels. It consists of various components, including the transmission, driveshaft, differential, and axles. Regular maintenance and inspections are essential to ensure the drivetrain is functioning properly and to prevent any potential issues that may arise.

Signs of a faulty drivetrain include slipping gears, unusual noises during acceleration, vibrations while driving, and difficulty accelerating.

The undercarriage of a Dodge Journey is made up of various components that work together to ensure the vehicle’s stability and safety. Regular maintenance and inspections are necessary to identify any potential issues and to keep the undercarriage in good condition. By understanding the different components and their functions, you can better care for your vehicle and address any problems that may arise.

The Frame: The Backbone of the Undercarriage

When it comes to the undercarriage of a Dodge Journey, the frame is one of the most important components. Serving as the backbone of the entire undercarriage system, the frame provides structural support and helps distribute the weight of the vehicle.

The frame of the Dodge Journey is typically made of high-strength steel, designed to withstand the various stresses and strains that the vehicle may encounter on the road. It is constructed in a way that provides rigidity and durability, ensuring the safety and performance of the vehicle.

Not only does the frame provide structural stability, but it also houses important components such as the suspension system, fuel tank, and exhaust system. These components are securely attached to the frame, making it a crucial part of the undercarriage assembly.

In addition to its functional role, the frame also contributes to the overall design of the vehicle. It helps determine the ride height and ground clearance of the Dodge Journey, which can affect its off-road capabilities and overall handling.

It is important to regularly inspect the frame for any signs of damage or corrosion. Exposure to road salt, moisture, and other environmental factors can cause the frame to rust or weaken over time. Any compromises to the integrity of the frame can significantly impact the safety and performance of the vehicle.

In conclusion, the frame is an integral component of the Dodge Journey’s undercarriage. It provides structural support, houses important components, and contributes to the overall design of the vehicle. Regular maintenance and inspection of the frame are essential for ensuring its longevity and preserving the safety of the vehicle.

Suspension System: Ensuring a Smooth Ride

The suspension system of a Dodge Journey plays a crucial role in ensuring a smooth and comfortable ride. It is responsible for minimizing the impact of bumps and uneven road surfaces, providing stability, and improving handling. Understanding how the suspension system works can help you appreciate its importance and know when it needs maintenance or repairs.

Components of the Suspension System

The suspension system of a Dodge Journey consists of several key components, including:

Maintaining the Suspension System

To ensure optimal performance and longevity of the suspension system, regular maintenance is necessary. Here are some tips:

• Inspect the suspension system for any signs of damage or wear, such as leaking shock absorbers, worn-out bushings, or cracked control arms.
• Check the tire pressure regularly, as underinflated or overinflated tires can affect the suspension system.
• Get regular wheel alignments and balancing to maintain proper alignment and prevent premature wear of suspension components.
• Follow the manufacturer’s recommendations for replacing shock absorbers and other suspension components.

By taking care of your Dodge Journey’s suspension system, you can ensure a smooth and comfortable ride, as well as prolong the lifespan of the various components.

Steering System: Controlling the Movement

The steering system of the Dodge Journey is responsible for controlling the movement of the vehicle. It allows the driver to easily navigate through various road conditions and make turns with precision.

At the heart of the steering system is the steering wheel, which the driver uses to manipulate the direction of the wheels. When the steering wheel is turned, it activates a series of components that work together to turn the wheels accordingly. These components include the steering column, steering gearbox, and tie rods.

Steering Column

The steering column is the part that connects the steering wheel to the steering gearbox. It consists of a series of shafts and joints that allow for the transmission of motion from the steering wheel to the wheels. The steering column also houses various electrical components, such as the ignition switch and the cruise control module.

Steering Gearbox

The steering gearbox is responsible for converting the rotational motion of the steering wheel into lateral motion of the wheels. It contains a set of gears that help to increase or decrease the force applied by the driver to turn the wheels. The steering gearbox also provides a mechanical advantage, making it easier for the driver to turn the wheels.

Within the steering gearbox, there is a power steering system that helps to further assist the driver in turning the wheels. The power steering system uses hydraulic or electric assistance to reduce the effort required to turn the wheels, especially during low-speed maneuvers or when parking.

The tie rods are the components that connect the steering gearbox to the wheels. They are responsible for transmitting the motion from the gearbox to the wheels, allowing for precise control and alignment. The tie rods are crucial for maintaining proper wheel alignment and ensuring that the vehicle tracks straight.

Overall, the steering system of the Dodge Journey plays a vital role in controlling the movement of the vehicle. It allows for precise steering and maneuverability, ensuring a smooth and safe driving experience.

Brake System: Stopping and Slowing Down

The brake system in a Dodge Journey is crucial for stopping and slowing down the vehicle. It consists of various components working together to ensure safe and efficient braking.

Brake Pedal

The brake pedal is located on the driver’s side footwell and is used to activate the braking system. When the brake pedal is pressed, it transmits the force to the brake master cylinder.

Brake Master Cylinder

The brake master cylinder is an essential part of the brake system. It is responsible for converting the force applied on the brake pedal into hydraulic pressure. This pressure is then sent to the brake calipers or wheel cylinders to initiate braking.

Brake Calipers and Wheel Cylinders

The brake calipers and wheel cylinders are responsible for applying pressure to the brake pads or shoes, which in turn creates friction against the rotors or drums. This friction slows down and eventually stops the vehicle.

Brake Fluid

Brake fluid is a hydraulic fluid that plays a vital role in the brake system. It serves as a medium for transmitting the force from the brake master cylinder to the brake calipers or wheel cylinders. It also helps in transferring heat away from the braking components.

Brake Pads and Shoes

The brake pads and shoes are the components that directly contact the rotors or drums, creating friction to slow down the vehicle. Over time, these components wear out and need to be replaced to maintain optimum braking performance.

Brake Rotors and Drums

Brake rotors and drums are the components that provide a surface for the brake pads and shoes to contact. They are essential for dissipating heat generated during braking and ensuring smooth operation.

Brake Lines

The brake lines are the channels through which brake fluid flows. They connect the brake master cylinder to the brake calipers or wheel cylinders and allow for the transfer of hydraulic pressure.

In conclusion, the brake system in a Dodge Journey is a complex system that works together to ensure safe and efficient stopping and slowing down of the vehicle. Regular maintenance and inspection of these components are essential to maintain optimum braking performance.

Exhaust System: Managing the Emissions

The exhaust system plays a crucial role in managing the emissions produced by the Dodge Journey. It is responsible for safely removing harmful gases and pollutants from the engine and expelling them into the environment. Understanding how the exhaust system works is essential for maintaining the vehicle’s efficiency and reducing its impact on air quality.

Components of the Exhaust System

The exhaust system of the Dodge Journey consists of several key components:

• Exhaust Manifold: Collects the exhaust gases from the engine cylinders and directs them into the exhaust pipe.
• Catalytic Converter: Converts harmful gases, such as carbon monoxide and nitrogen oxides, into less harmful substances through a chemical reaction.
• Muffler: Reduces the noise produced by the exhaust gases as they exit the tailpipe.
• Exhaust Pipe: Transports the exhaust gases from the engine to the rear of the vehicle.
• Resonator: Further reduces the noise generated by the exhaust gases and helps maintain optimal backpressure.
• Tailpipe: Releases the treated exhaust gases into the atmosphere.

Functioning of the Exhaust System

Once the engine combustion process occurs, the resulting gases and pollutants must be safely expelled from the vehicle. The exhaust manifold collects the gases from each cylinder and channels them into the exhaust pipe. Along the way, the gases pass through the catalytic converter, where harmful substances are converted into less harmful ones.

From there, the treated gases continue through the muffler and resonator, which reduce noise and maintain backpressure for optimal engine performance. Finally, the tailpipe releases the exhaust gases into the air.

Tackling Emissions and Pollution Control

The exhaust system plays a critical role in managing emissions and ensuring compliance with environmental regulations. The catalytic converter is particularly crucial in reducing harmful emissions, as it converts pollutants into more environmentally friendly substances. Regular inspection and maintenance of the exhaust system are essential to ensure its proper functioning and optimal pollution control.

The Dodge Journey’s exhaust system is a complex network of components that work together to manage emissions and minimize the vehicle’s impact on the environment. Understanding how the system functions and recognizing its importance can help drivers take the necessary steps to maintain their vehicle’s efficiency and reduce pollution.

Fuel System: Supplying the Engine

The fuel system in the Dodge Journey plays a crucial role in supplying the engine with the necessary fuel for combustion. Understanding how the fuel system works is essential for ensuring the proper functioning of the engine.

The fuel tank is where the gasoline is stored in the vehicle. It is typically located towards the rear of the vehicle, underneath the car body. The fuel tank has a capacity of several gallons and is made of sturdy materials to prevent leaks and ensure the safety of the occupants.

The fuel pump is responsible for drawing fuel from the tank and delivering it to the engine. It is typically an electric pump located inside the fuel tank. The fuel pump maintains a constant supply of fuel to the engine, ensuring that it has the necessary amount for combustion. It operates at a specific pressure to meet the engine’s requirements.

Fuel Filter

The fuel filter is an essential component of the fuel system that helps clean the fuel before it reaches the engine. It removes any impurities, debris, or contaminants present in the fuel. A clean fuel filter ensures that only clean fuel enters the engine, promoting optimal combustion and preventing damage to the engine components.

Fuel Injectors

The fuel injectors are responsible for delivering the precise amount of fuel into the combustion chamber. They are electronically controlled valves that spray fuel in a fine mist, allowing for efficient combustion. The fuel injectors work in sync with the engine’s control module to determine the optimal fuel-air mixture for combustion.

Throttle Body

The throttle body controls the amount of air that enters the engine, in conjunction with the fuel being delivered by the fuel injectors. The amount of air and fuel mixture is crucial for proper combustion. The throttle body regulates the airflow and ensures that the engine receives the right amount of air-fuel mixture for efficient combustion.

In summary, the fuel system in the Dodge Journey comprises various components, including the fuel tank, fuel pump, fuel filter, fuel injectors, and throttle body. These components work together to ensure a consistent supply of clean fuel to the engine, allowing for efficient combustion and optimal performance of the vehicle.

Drivetrain: Transmitting Power to the Wheels

The drivetrain of a Dodge Journey is responsible for transmitting power from the engine to the wheels, allowing the vehicle to move. It plays a crucial role in determining how the vehicle performs and handles in various driving conditions.

The drivetrain of a Dodge Journey consists of several components that work together to transmit power to the wheels:

Transmission:

The transmission is a key component of the drivetrain. It takes the rotational power generated by the engine and converts it into torque, which is then sent to the wheels. The Dodge Journey can be equipped with either a manual or automatic transmission, depending on the model and trim level.

In vehicles with a manual transmission, a clutch is used to engage and disengage the engine from the transmission. It allows the driver to change gears and control the power delivery to the wheels. When the clutch is pressed, the power flow to the wheels is temporarily interrupted, allowing the driver to shift gears.

Transfer Case:

The transfer case is found in all-wheel drive (AWD) or four-wheel drive (4WD) vehicles and is responsible for distributing power to the front and rear wheels. It allows the driver to switch between different driving modes, such as 2WD for everyday driving or 4WD for off-road conditions. The transfer case ensures that power is evenly distributed to all wheels for enhanced traction and stability.

Differential:

The differential is a component that allows the wheels to rotate at different speeds, especially when turning corners. It is located between the two drive wheels and is responsible for distributing power between them. This helps prevent wheel slippage and provides better handling and control.

Overall, the drivetrain of a Dodge Journey is a complex system that works seamlessly to deliver power to the wheels, ensuring optimal performance and handling. Understanding how these components function together can help drivers make informed decisions and properly maintain their vehicles.

Maintenance and Troubleshooting Tips for the Undercarriage

The undercarriage of your Dodge Journey is an important component of the vehicle that requires regular maintenance to ensure optimal performance and longevity. Here are some maintenance and troubleshooting tips to help you keep your undercarriage in great condition:

1. Inspect for Rust and Corrosion

Regularly inspect the undercarriage of your Dodge Journey for any signs of rust or corrosion. Rust can weaken the structural integrity of the undercarriage components, leading to potential safety hazards. If you notice any rust or corrosion, it is important to address the issue immediately to prevent further damage. Consider using rust inhibitors or protective coatings to help prevent future rusting.

2. Check for Leaks

Periodically inspect the undercarriage for any leaks, such as oil, coolant, or brake fluid. Leaks can indicate a problem with your vehicle’s engine or other systems. If you notice any leaks, it is important to identify and fix the source of the problem as soon as possible to avoid further damage and potential safety issues.

3. Clean and Remove Debris

Regularly clean the undercarriage to remove any dirt, mud, or debris that may accumulate. Accumulated debris can trap moisture and promote rust and corrosion. Use a high-pressure hose or pressure washer to thoroughly clean the undercarriage, paying close attention to hard-to-reach areas. Additionally, remove any stuck-on debris using a plastic scraper or brush.

4. Lubricate Moving Parts

Properly lubricate the moving parts of the undercarriage, such as the suspension components and drive shaft, as per the manufacturer’s recommendations. Lubrication helps reduce friction and wear, extending the lifespan of these components. Be sure to use the recommended lubricants and follow the recommended intervals for lubrication.

5. Perform Regular Inspections

Regularly inspect the undercarriage for any signs of damage or wear. Check for loose or damaged components, such as exhaust system parts, fuel lines, or suspension components. Identify any issues and address them promptly to prevent further damage and potential safety hazards.

By following these maintenance and troubleshooting tips, you can ensure that your Dodge Journey’s undercarriage remains in good condition, promoting optimal performance and prolonging the lifespan of your vehicle.

What is the undercarriage diagram of the Dodge Journey?

The undercarriage diagram of the Dodge Journey shows the various components that make up the underside of the vehicle, including the suspension system, exhaust system, fuel system, and drivetrain.

Where can I find a complete undercarriage diagram for the Dodge Journey?

You can find a complete undercarriage diagram for the Dodge Journey in the owner’s manual or by searching online on the Dodge website or other automotive websites. These diagrams provide a detailed view of the various components and their placement on the vehicle.

What are the important components of the undercarriage of the Dodge Journey?

The important components of the undercarriage of the Dodge Journey include the suspension system, which includes the shocks, struts, and control arms; the exhaust system, which includes the muffler and catalytic converter; the fuel system, which includes the fuel tank and fuel lines; and the drivetrain, which includes the transmission, driveshaft, and differential.

Why is it important to understand the undercarriage diagram of the Dodge Journey?

Understanding the undercarriage diagram of the Dodge Journey is important for several reasons. Firstly, it allows you to better understand the structure and layout of the vehicle, which can be useful when performing maintenance or repairs. Additionally, it can help you identify any potential issues or areas of concern, such as rust or damage, that may need attention. Lastly, having a thorough understanding of the undercarriage diagram can make it easier to communicate with mechanics or automotive professionals if you need assistance.

Are there any specific maintenance tasks that should be performed on the undercarriage of the Dodge Journey?

Yes, there are several maintenance tasks that should be performed on the undercarriage of the Dodge Journey. This includes regular inspections of the suspension system for signs of wear or damage, checking the exhaust system for leaks or corrosion, and inspecting the fuel system for any signs of leaks or damage. Additionally, it’s important to keep the undercarriage clean and free of dirt and debris, as this can help prevent rust and corrosion.

What is the purpose of the undercarriage diagram for the Dodge Journey?

The undercarriage diagram for the Dodge Journey serves as a visual representation of the components and layout of the vehicle’s undercarriage. It helps in identifying and understanding the different parts and their functions, which is useful for maintenance, repairs, and troubleshooting.

How can I use the undercarriage diagram to locate specific components?

Using the undercarriage diagram, you can identify the specific components of the Dodge Journey’s undercarriage and their positions. By referring to the diagram, you can easily locate and identify parts such as the exhaust system, suspension components, fuel tank, and more. This can be helpful when performing repairs or inspections on your vehicle.

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Shopping Cart 0

Questions and Answers

FREE SHIPPING on most orders of $35+ & FREE PICKUP IN STORE

2009 Dodge Journey

2009 Dodge Journey - Suspension Knuckle Bushing/Insert

• Dorman OE Solutions
• Precision Chassis
• Rubber, Steel

Dorman OE Solutions Knuckle Bushing

Precision chassis knuckle bushing.

• 1-888-511-3595
• Chrysler Parts
• Dodge Parts
• Accessories
• Login/Register
• Track Order
• Help Center

Crossmember - Front Suspension fit your 2009 Dodge Journey

You have selected

• Crossmember - Front Suspension
• Front Stabilizer Bar
• Suspension - Front

Other Categories

• Fitting Vehicle Options : 49 - HATCHBACK TYPE #2, D - DODGE, DEF, E - DODGE AWD
• Replaced By : 5006926AC

• Fitting Vehicle Options : 49 - HATCHBACK TYPE #2, D - DODGE, E - DODGE AWD
• Replaced By : 5085819AJ

• Require Quantity : 4
• Package Quantity : 1
• Require Quantity : 2

• Replaced By : 6509057AA

• Require Quantity : 3
• Replaced By : 5168149AB