honeywell voyager 1250g barcode scanner manual

Honeywell Voyager 1250g manual

manual Honeywell Voyager 1250g

View the manual for the Honeywell Voyager 1250g here, for free. This manual comes under the category barcode reader and has been rated by 9 people with an average of a 8.4. This manual is available in the following languages: English. Do you have a question about the Honeywell Voyager 1250g or do you need help?  Ask your question here

• Table of Contents
• About This Manual
• Unpacking Your Device
• Connecting with USB
• Connecting with Keyboard Wedge
• Connecting with RS232 Serial Port
• Connecting with RS485
• Reading Techniques
• Menu Bar Code Security Settings
• Setting Custom Defaults
• Resetting the Custom Defaults
• Introduction
• Keyboard Wedge
• IBM PS2 Keyboard
• RS232 Serial Port
• USB IBM SurePos
• IBM Secondary Interface
• USB PC or Macintosh Keyboard
• HID Fallback Mode
• USB Serial Emulation
• CTS/RTS Emulation
• ACK/NAK Mode
• Communication Timeout
• NAK Retries
• Support BEL/CAN in ACK/NAK
• Verifone® Ruby Terminal Default Settings
• Gilbarco® Terminal Default Settings
• Honeywell Bioptic Aux Port Configuration
• Datalogic™ Magellan© Bioptic Aux Port Configuration
• NCR Bioptic Aux Port Configuration
• Wincor Nixdorf Terminal Default Settings
• Wincor Nixdorf Beetle™ Terminal Default Settings
• Wincor Nixdorf RS232 Mode A
• Keyboard Country Layout
• Keyboard Style
• Keyboard Conversion
• Keyboard Modifiers
• Inter-Scan Code Delay
• <F0> Break Character
• Keyboard Wedge Defaults
• RS232 Baud Rate
• RS232 Word Length: Data Bits, Stop Bits, and Parity
• RS232 Handshaking
• RS232 Timeout
• RS232 Defaults
• NCR ACK/NAK
• Block Check Character
• NCR Prefix/Suffix
• NCR NOF (Not-on-File) Error
• Scanner-Bioptic Packet Mode
• Power Up Beeper
• Beep on BEL Character
• Beeper – Good Read
• Beeper Volume – Good Read
• Beeper Pitch – Good Read
• Beeper - Transmit Order
• Beeper Pitch – Error
• Beeper Duration – Good Read
• Number of Beeps – Good Read
• Number of Beeps – Error
• LED Settings
• LED Brightness
• In-Stand and Out-of-Stand Defaults
• Presentation Modes
• Manual Activation Mode
• End Manual Activation After Good Read
• Manual Activation Laser Timeout - Trigger Settings
• Object Detection Mode
• End Object Detection After Good Read
• Object Detection Laser Timeout
• Object Detection Distance
• Activation Character
• End Character Activation After Good Read
• Character Activation Laser Timeout
• Deactivation Character
• Reread Delay
• User-Specified Reread Delay
• Output Sequence Editor
• To Add an Output Sequence
• Other Programming Selections
• Sequence Timeout
• Sequence Match Beeper
• Partial Sequence
• Require Output Sequence
• To Add a Prefix or Suffix:
• To Clear One or All Prefixes or Suffixes
• To Add a Carriage Return Suffix to All Symbologies
• Prefix Selections
• Suffix Selections
• Transmit Alternate Extended ASCII Characters
• Function Code Transmit
• Communication Check Character
• Intercharacter Delay
• User Specified Intercharacter Delay
• Interfunction Delay
• Intermessage Delay
• Data Format Editor Introduction
• Terminal ID Table
• Move Commands
• Search Commands
• Miscellaneous Commands
• Data Format Non-Match Error Tone
• Single Scan Data Format Change
• All Symbologies
• Message Length Description
• Codabar Concatenation
• Code 32 Pharmaceutical (PARAF)
• Interleaved 2 of 5
• Straight 2 of 5 Industrial (three-bar start/stop)
• Straight 2 of 5 IATA (two-bar start/stop)
• Matrix 2 of 5
• UPC-A Number System 4 Addenda Required
• UPC-A Number System 5 Addenda Required
• EAN-13 Beginning with 2 Addenda Required
• EAN-13 Beginning with 290 Addenda Required
• EAN-13 Beginning with 378/379 Addenda Required
• EAN-13 Beginning with 414/419 Addenda Required
• EAN-13 Beginning with 434/439 Addenda Required
• EAN-13 Beginning with 977 Addenda Required
• EAN-13 Beginning with 978 Addenda Required
• EAN-13 Beginning with 979 Addenda Required
• ISBN Translate
• ISSN Translate
• Plessey Code
• GS1 DataBar Omnidirectional
• GS1 DataBar Limited
• GS1 DataBar Expanded
• Trioptic Code
• GS1 Emulation
• China Post (Hong Kong 2 of 5)
• Keyboard Function Relationships
• Supported Interface Keys
• To Add a Test Code I.D. Prefix to All Symbologies
• Show Software Revision
• Show Data Format
• Installing EZConfig-Scanning from the Web
• Resetting the Factory Defaults
• Conventions
• Menu Command Syntax
• Read Time-Out
• Resetting the Standard Product Defaults
• Menu Commands
• Voyager 1250g Scanner Product Specifications
• Typical Performance
• Serial Output
• RS485 Output
• Cleaning the Device:
• Inspecting Cords and Connectors
• Replacing an Interface Cable
• Troubleshooting a Voyager Scanner
• Technical Assistance
• Symbology Charts
• ASCII Conversion Chart (Code Page 1252)
• Lower ASCII Reference Table
• ISO 2022/ISO 646 Character Replacements
• Unicode Key Maps
• Sample Symbols
• Programming Chart

Do you have a question about the Honeywell and is the answer not in the manual?

• Receive updates on solutions
• Get answers to your question

Question and answer

I put it in manual activation mode off and the laser no longer comes out, how can I reset it to factory settings, the equipment is Honeywell Voyager 1250g.

Does the Honeywell Voyager 1250g barcode reader skip two spaces (in the case of Excel spreadsheets) when scanning? Is there a way to change this configuration to only have one line break?

Reg the Program Keyboard Country bar code. Where can I find the code for Lithuania?

how do I program a honeywell 1250g to read I2of5 Symbology?

Scanner strip has come out..

Honey well 1250g barcode scanner jumb scan

The Honeywell Voyager 1250g barcode reader is a device that is capable of decoding 1D and GS1 barcode standards. With an input voltage of 5 V, it consumes approximately 140 mA of power. The device is designed to be shockproof, ensuring its durability and reliability in various environments. In terms of dimensions, the Honeywell Voyager 1250g measures 168 millimeters in width, 60 millimeters in depth, and 74 millimeters in height. It also weighs approximately 133 grams, making it lightweight and easy to handle. Additionally, it has been rated with an International Protection (IP) code of IP41, which indicates its resistance to solid objects larger than 1 millimeter and protection against dripping water. The Honeywell Voyager 1250g is specifically engineered to provide efficient and accurate barcode scanning capabilities. Its decoding capabilities allow it to read various types of barcodes, ensuring compatibility with different products and applications. By utilizing the device, users can easily scan and capture barcode information, enhancing operational efficiency and productivity. Moreover, the compact and ergonomic design of the Honeywell Voyager 1250g enables comfortable usage, minimizing strain during prolonged scanning tasks. Its sturdy construction and shockproof feature make it suitable for use in rugged environments, increasing its longevity and potential for diverse applications. Overall, the Honeywell Voyager 1250g barcode reader offers a reliable and accurate solution for barcode scanning needs. Its durability, versatility, and decoding capabilities make it an efficient tool for businesses in various industries that require fast and accurate data capture.

Ports & interfaces

Other features, weight & dimensions, performance, operational conditions, logistics data.

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Honeywell Voyager 1250g below.

What is the weight of the Honeywell Voyager 1250g?

The Honeywell Voyager 1250g has a weight of 133 g.

How do I turn on the Honeywell Voyager 1250g barcode reader?

Press the power button located on the top of the device to turn it on.

How do I change the scanning mode of the Honeywell Voyager 1250g?

To change the scanning mode, there is a specific button you can press that will cycle through the available modes.

How can I adjust the beeper volume of the Honeywell Voyager 1250g?

You can adjust the beeper volume by accessing the settings menu and locating the option for adjusting sound preferences.

Can I change the scan angle of the Honeywell Voyager 1250g?

Yes, you can adjust the scan angle by following the instructions in the device's settings menu to find the scan angle adjustment feature.

How do I connect the Honeywell Voyager 1250g to my computer?

You can connect the barcode reader to your computer using the provided USB cable. Simply plug one end of the cable into the reader and the other end into an available USB port on your computer.

Does the Honeywell Voyager 1250g support 1D and GS1 barcode decoding standards?

Yes, the Honeywell Voyager 1250g supports both 1D and GS1 barcode decoding standards. This means that it can read a wide range of barcode types, making it versatile for different applications.

What is the input voltage required for the Honeywell Voyager 1250g?

The input voltage required for the Honeywell Voyager 1250g is 5 V. This means that it can be powered by a standard USB connection or a compatible power adapter.

How much power does the Honeywell Voyager 1250g consume?

The Honeywell Voyager 1250g consumes 140 mA of power. This is relatively low power consumption, which is beneficial for portable or battery-powered applications.

Is the Honeywell Voyager 1250g shockproof?

Yes, the Honeywell Voyager 1250g is shockproof. This means that it can withstand accidental drops or impacts without being damaged, ensuring the durability and reliability of the device.

What is the International Protection (IP) code rating of the Honeywell Voyager 1250g?

The Honeywell Voyager 1250g has an IP41 rating. This means that it is protected against solid objects larger than 1 mm in diameter and not fully protected against water. While it is not highly water-resistant, it offers sufficient protection in most indoor environments.

Is the manual of the Honeywell Voyager 1250g available in English?

Yes, the manual of the Honeywell Voyager 1250g is available in English .

Is your question not listed? Ask your question here

Honeywell Voyager 1200g

Honeywell Voyager 1450g

Honeywell Voyager XP 1472g

Honeywell Voyager 1202G

Honeywell Voyager 1400g

Honeywell Voyager XP 1470g

Honeywell Voyager 1452g

Honeywell Voyager 1602g

Honeywell Voyager MS9520

Honeywell Xenon XP 1950g

Barcode Scanner

Honeywell VOYAGER 1250G User Manual

About honeywell voyager 1250g user manual.

This Honeywell VOYAGER 1250G User’s Guide provides installation and programming instructions for the Voyager 1250g single-line laser scanner. Product specifications, dimensions, warranty, and customer support information are also included.

Honeywell bar code scanners are factory programmed for the most common terminal and communications settings. If you need to change these settings, programming is accomplished by scanning the bar codes in this guide. An asterisk (*) next to an option indicates the default setting.

Honeywell VOYAGER 1250G Unpacking

After you open the shipping carton containing the product, take the following steps:

• Check for damage during shipment. Report damage immediately to the carrier who delivered the carton.
• Make sure the items in the carton match your order.
• Save the shipping container for later storage or shipping.

Honeywell VOYAGER 1250G Connecting the Device

Honeywell voyager 1250g connecting with usb.

A scanner can be connected to the USB port of a computer.

• Connect the appropriate interface cable to the scanner first, then to the computer.
• The scanner beeps.
• Verify the scanner operation by scanning a bar code from the Sample Symbols in the back of this manual

The unit defaults to a USB PC Keyboard. Refer to page 2-5 for other USB terminal settings.

For additional USB programming and technical information, refer to “USB Application Note,” available at www.honeywel laidc.com.

Honeywell VOYAGER 1250G Connecting with Keyboard Wedge

A scanner can be connected between the keyboard and PC as a “keyboard wedge,” plugged into the serial port, or connected to a portable data termi- nal in wand emulation or non decoded output mode. The following is an example of a keyboard wedge connection:

• Turn off power and disconnect the keyboard cable from the back of the terminal/computer.
• Connect the appropriate interface cable to the scanner and to the terminal/computer.
• Turn the terminal/computer power back on. The scanner beeps.
• Verify the scanner operation by scanning a bar code from the Sample Symbols in the back of this manual. The scanner beeps once.

The unit defaults to an IBM PC AT and compatibles keyboard wedge inter- face with a USA keyboard. A carriage return (CR) suffix is added to bar code data.

Honeywell VOYAGER 1250G Connecting with RS232 Serial Port

• Turn off power to the terminal/computer.
• Connect the appropriate interface cable to the scanner.
• Plug the serial connector into the serial port on your computer. Tighten the two screws to secure the connector to the port.
• Once the scanner has been fully connected, power up the computer.

This interface programs 9600 baud, 8 data bits, no parity, and 1 stop bit.

Honeywell VOYAGER 1250G Connecting with RS485

A scanner can be connected for an IBM POS terminal interface.

• Connect the appropriate interface cable to the device, then to the computer
• Turn the terminal/computer power back on. The scanner beeps

For further RS485 settings, refer to RS485, page 2-2.

Readmore and Download Honeywell VOYAGER 1250G User Manual PDF

Latest Manuals

• Honeywell RTH7600 Operating Manual
• Honeywell VisionPRO® IAQ Installation Manual
• Honeywell RTH8500 Wi-Fi Series Manual
• Honeywell RTH2300/RTH221 Installation Guide
• ADEMCO VISTA SERIES VISTA-20P / VISTA-20PSIA VISTA-15P / VISTA-15PSIA Manual
• Honeywell RCT8102A Series Programmable Thermostat Manual
• Honeywell RLV4300 5-2 Programmable Thermostat Manual
• Honeywell T4 T4R T4M Thermostat User Manual
• Honeywell Remote Heating Controller DHC Manual
• Honeywell CT87N Manual
• Honeywell RTH230B Programmable Electronic Thermostat Installation Manual and User Guide
• Honeywell Lyric Round™ Wi-Fi Thermostat Manual
• Honeywell RTH9590 Wi-Fi With Voice Control Manual
• Honeywell RTH7400 Programmable Thermostat Owners Guide
• Honeywell RTH8500 Operating Manual

Popular Manuals

• Honeywell RTH221B1039 Operating Manual
• Honeywell T4 pro Series Thermostat Manual
• Honeywell TH8321WF1001 Installation Guide
• Honeywell RTH2310B Owners Manual
• Honeywell RTH2300B1038 Operating Manual
• Honeywell TH6110D1005 Owner's Manual
• Honeywell TH3110D1008 Owner's Manual
• Honeywell TH6220D1028 Owner's Manual
• Honeywell Pro 4000 Series/TH4110D1007 Owner's Manual
• Honeywell TH5220D1003 Owner's Manual
• Honeywell CM921 User Manual
• Honeywell RTH111B1024 Quick Installation Guide
• Privacy Policy

• Honeywell Manuals
• Barcode Reader
• VOYAGER 1250G
• Quick start manual

Honeywell Voyager 1250g Quick Start Manual

• User manual (240 pages)
• User manual (246 pages)
• User manual (222 pages)
• page of 14 Go / 14

Table of Contents

• Quick Start Guide
• Getting Started
• Power Supply Assembly (if Included)
• Connecting the Scanner
• Reading Techniques
• Standard Product Defaults
• Keyboard Country
• Reread Delay
• Add Code ID Prefix to All Symbologies
• Data Format Editor Instructions
• Programming Chart
• Technical Assistance
• Limited Warranty

Advertisement

Quick Links

• 1 Quick Start Guide
• 2 Getting Started
• 3 Reading Techniques
• 4 Keyboard Country
• 5 Programming Chart
• Download this manual

Related Manuals for Honeywell Voyager 1250g

Summary of Contents for Honeywell Voyager 1250g

• Page 1 For Help Call 1.800.241.6264 Honeywell Voyager 1250g Quick Start More information available at POSMicro.com QUESTIONS? BULk DISCOUNTS SE HaBLa Ask the experts at POSMicro.com. ESpañOL FREE SHIPPING* 1.800.241.6264 Live Chat Now [email protected] Monday - Friday 6 AM to 5 PM Pacific Time...

Page 2: Quick Start Guide

Page 3: getting started.

• Page 4 Serial (RS232): RS485: Keyboard Wedge:...

Page 5: Reading Techniques

Page 6: keyboard country, page 7: reread delay, page 8: data format editor instructions, page 9: programming chart.

• Page 10 Save...

Page 11: Technical Assistance

• Page 12 This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of HII. © 2011 Honeywell International Inc. All rights reserved. Web Address: www.honeywellaidc.com...

This manual is also suitable for:

Rename the bookmark, delete bookmark, delete from my manuals, upload manual.

Honeywell Voyager 1250G Users Manual Single Line Laser Scanner User's Guide

1250g to the manual 4582b8f5-d515-497b-a852-ed9a0aed1e1f.

: Honeywell Honeywell-Voyager-1250G-Users-Manual-261778 honeywell-voyager-1250g-users-manual-261778 honeywell pdf

• About This Manual
• Unpacking Your Device
• Connecting with USB
• Connecting with Keyboard Wedge
• Connecting with RS232 Serial Port
• Connecting with RS485
• Reading Techniques
• Menu Bar Code Security Settings
• Setting Custom Defaults
• Resetting the Custom Defaults
• Resetting the Factory Defaults
• Introduction
• Keyboard Wedge
• IBM PS2 Keyboard
• RS232 Serial Port
• USB IBM SurePos
• IBM Secondary Interface
• USB PC or Macintosh Keyboard
• HID Fallback Mode
• USB Serial Emulation
• CTS/RTS Emulation
• ACK/NAK Mode
• Communication Timeout
• NAK Retries
• Support BEL/CAN in ACK/NAK
• Verifone® Ruby Terminal Default Settings
• Gilbarco® Terminal Default Settings
• Honeywell Bioptic Aux Port Configuration
• Datalogic™ Magellan© Bioptic Aux Port Configuration
• NCR Bioptic Aux Port Configuration
• Wincor Nixdorf Terminal Default Settings
• Wincor Nixdorf Beetle™ Terminal Default Settings
• Keyboard Country Layout
• Keyboard Style
• Keyboard Conversion
• Keyboard Modifiers
• Inter-Scan Code Delay
• <F0> Break Character
• Keyboard Wedge Defaults
• RS232 Baud Rate
• RS232 Word Length: Data Bits, Stop Bits, and Parity
• RS232 Handshaking
• RS232 Timeout
• RS232 Defaults
• NCR ACK/NAK
• Block Check Character
• NCR Prefix/Suffix
• NCR NOF (Not-on-File) Error
• Scanner-Bioptic Packet Mode
• Power Up Beeper
• Beep on BEL Character
• Beeper – Good Read
• Beeper Volume – Good Read
• Beeper Pitch – Good Read
• Beeper - Transmit Order
• Beeper Pitch – Error
• Beeper Duration – Good Read
• Number of Beeps – Good Read
• Number of Beeps – Error
• LED Settings
• LED Brightness
• In-Stand and Out-of-Stand Defaults
• Presentation Modes
• Manual Activation Mode
• End Manual Activation After Good Read
• Manual Activation Laser Timeout - Button Settings
• Object Detection Mode
• End Object Detection After Good Read
• Object Detection Laser Timeout
• Object Detection Distance
• Activation Character
• End Character Activation After Good Read
• Character Activation Laser Timeout
• Deactivation Character
• Reread Delay
• User-Specified Reread Delay
• Require Output Sequence
• Output Sequence Editor
• To Add an Output Sequence
• Other Programming Selections
• Sequence Timeout
• Sequence Match Beeper
• Partial Sequence
• To Add a Prefix or Suffix:
• To Clear One or All Prefixes or Suffixes
• To Add a Carriage Return Suffix to All Symbologies
• Prefix Selections
• Suffix Selections
• Transmit Alternate Extended ASCII Characters
• Function Code Transmit
• Communication Check Character
• Intercharacter Delay
• User Specified Intercharacter Delay
• Interfunction Delay
• Intermessage Delay
• Data Format Editor Introduction
• Terminal ID Table
• Move Commands
• Search Commands
• Miscellaneous Commands
• Data Format Non-Match Error Tone
• Single Scan Data Format Change
• All Symbologies
• Message Length Description
• Codabar Concatenation
• Code 32 Pharmaceutical (PARAF)
• Interleaved 2 of 5
• Straight 2 of 5 Industrial (three-bar start/stop)
• Straight 2 of 5 IATA (two-bar start/stop)
• Matrix 2 of 5
• UPC-A Number System 4 Addenda Required
• UPC-A Number System 5 Addenda Required
• EAN-13 Beginning with 2 Addenda Required
• EAN-13 Beginning with 290 Addenda Required
• EAN-13 Beginning with 378/379 Addenda Required
• EAN-13 Beginning with 414/419 Addenda Required
• EAN-13 Beginning with 434/439 Addenda Required
• EAN-13 Beginning with 977 Addenda Required
• EAN-13 Beginning with 978 Addenda Required
• EAN-13 Beginning with 979 Addenda Required
• ISBN Translate
• ISSN Translate
• Plessey Code
• GS1 DataBar Omnidirectional
• GS1 DataBar Limited
• GS1 DataBar Expanded
• Trioptic Code
• GS1 Emulation
• China Post (Hong Kong 2 of 5)
• Keyboard Function Relationships
• Supported Interface Keys
• To Add a Test Code I.D. Prefix to All Symbologies
• Show Software Revision
• Show Data Format
• Installing EZConfig-Scanning from the Web
• Conventions
• Menu Command Syntax
• Read Time-Out
• Resetting the Standard Product Defaults
• Menu Commands
• Voyager 1250g Scanner Product Specifications
• Serial Output
• RS485 Output
• Cleaning the Device:
• Inspecting Cords and Connectors
• Replacing an Interface Cable
• Troubleshooting a Voyager Scanner
• Customer Support
• Symbology Chart
• ASCII Conversion Chart (Code Page 1252)
• Code Page Mapping of Printed Barcodes
• Sample Symbols
• Programming Chart

Navigation menu

• Upload a User Manual

Versions of this User Manual:

• Download & Help
• User Manual
• Discussion / Help
• © 2024 UserManual.wiki