time to travel 75 km

Speed Distance Time Calculator

Please enter the speed and distance values to calculate the travel time in hours, minutes and seconds.

About Speed Distance Time Calculator

This online calculator tool can be a great help for calculating time basing on such physical concepts as speed and distance. Therefore, in order to calculate the time, both distance and speed parameters must be entered. For the speed , you need to enter its value and select speed unit by using the scroll down menu in the calculator. For distance , you should enter its value and also select the proper length measurement unit from the scroll down menu. You'll receive the result in standard time format (HH:MM:SS).

Time Speed Distance Formula

Distance is equal to speed × time. Time is equal Distance/Speed.

Calculate Time from Distance and Speed Examples

Recent comments.

One of the best tools I've found for the calculations.

Going 65mph for 30 seconds how far would you get? None of these formulas work without distance. How would I find the distance from time and speed?

if i travel 0.01 inches per second and I need to travel 999999999 kilometers, it takes 556722071 Days and 20:24:34 WHAT

4. How long does it take to do 100m at 3kph ? No I thought you would just divide 100 ÷ 3 = which 33.33333 so 33 seconds or so I thought. But apparently it 2 mins.

This was the best tool ive ever used that was on point from speed to distance and time Calculator

This was somewhat unhelpful as I know the time and distance, but not the speed. Would be helpful if this calculator also could solve the other two as well.

If a total distance of 2 miles is driven, with the first mile being driven at a speed of 15mph, and the second mile driven at a speed of 45 mph: What is the average speed of the full 2 mile trip?

hi sorry im newly introduced to this and i dont understand how to use it but in need to find the distance if i was travelling in the average speed of 15km/hr in 4 hours how far would i travel

D= 697 km T= 8 hours and 12 minutes S= ?

if a train is going 130 miles in 50 minutes, how fast is it going in miles per hour ??

whats the speed if you travel 2000 miles in 20hours?

How long would it take me to drive to Mars at 100 miles per hour and how much gas would I use in a 2000 Ford Mustang000000/ Also, how much CO2 would I release into the air?

great tool helped me alot

A car can go from rest to 45 km/hr in 5 seconds. What is its acceleration?

Guys how much time will a cyclist take to cover 132 METRES With a speed of 8 km/ph

@Mike Depends on how fast that actually is. For every 10 mph above 60, but below 120, you save 5 seconds a mile. But between the 30-60 area, every ten saves 10 seconds a mile (if I am remembering correctly), and every 10 between 15-30 is 20 seconds. Realistically, it isn't likely isn't worth it, unless it is a relatively straight drive with no stops, in which case you will likely go up a gear for the drive and thus improve gas efficiency for the trip. Only really saves time if it is over long trips 300+ miles (in which case, assuming you were on the interstate) that 5 seconds a mile would save you 25 minutes from the drive, making it go from 4h35m to 4h10m. For me, I have family across the U.S., so family visits are usually 900-1400 miles. Even only driving 5 above usually saves me 90-150 minutes or so (since I often have stretches where I drive on US highways which have 55 mph speed limits)

I would like to know if driving fast is worth it for short trips. If I drive 10 MPH over the speed limit for 10 miles, how much time do i save ? Is there an equation for that ?

it helps me in lot of stuff

awesome, helped me notice how long my taiga (electric seedoo) is going to last.

Drive Time Calculator to Calculate Driving Times, Trip Distances, ETAs, and More!

This free online Driving Times Calculator will calculate the number of hours and minutes it will take you to arrive at your destination based on the number of miles or kilometers you plan to drive, combined with the average speed (MPH or KMH) you expect to drive and the number and lengths of stops you expect to make.

The calculator also includes an optional Driving Distance Calculator that will calculate the distance between two cities, addresses, or points, plus map your route and give you turn-by-turn directions.

And finally, this car and truck driving time calculator will estimate your fuel costs, tell you what date and time you will arrive at your destination -- including any time zone variations, plus show you what effect driving faster or slower will have on your arrival time.

Also on the page:

• What Time To Leave Calculator
• Driving Hours Calculator

Drive Time Calculator

Calculate distance, driving times, ETA, and trip fuel-costs based on average speed and optional stops and time zones.

Selected Data Record:

A Data Record is a set of calculator entries that are stored in your web browser's Local Storage. If a Data Record is currently selected in the "Data" tab, this line will list the name you gave to that data record. If no data record is selected, or you have no entries stored for this calculator, the line will display "None".

Destination address:

Enter the address of the destination location.

After clicking the Get Distance button the address will be added to the dropdown menu and to your web browser's memory (if you browser supports Local Storage) for later use.

Note that the address you enter will be replaced by the address returned by Google Maps.

To clear a previously entered address, select it from the menu and click the Delete (X) button.

To clear all previously entered addresses, tap the Del Delete Delete All Delete All Addresses button in the button row.

Distance Calculator Button Row:

After entering the starting and destination addresses, click the Get Distance button (you may need to click a second time if map fails to appear). Once the map has appeared you can select Show Map, Show Directions, Show Both, or Show Neither.

Note that you can drag the address markers to new locations, at which time the distance, map, and directions should update automatically.

To clear all saved addresses, click the Del Delete Delete All Delete All Addresses button.

Map driving distance:

This is the driving distance according to Google Maps. For your convenience it will be added to the distance field in the Drive Time Calculator.

Map's estimated drive time:

This is the estimated drive time according to Google Maps. You can use this to compare with the results generated by the Drive Time Calculator.

Map's average speed:

This is the estimated average speed according to Google Maps. You can use this to compare with your own estimate.

Trip distance:

If you used the optional Driving Distance Calculator, and it worked correctly, this field should already be filled in. If not, enter the number of units (miles or kilometers) you plan on driving.

Average speed (MPH or KPH):

Select the average speed you plan to drive in miles per hour (MPH) or kilometers per hour (KPH).

Or, if you want to estimate travel times for speeds greater than 200 (jet, future commuter rail, Amtrak, high speed trains, etc.), enter the higher speed in the other field on this line.

Or, if one or more segements of your trip have significantly different speed limits, be sure you have entered the Trip distance in the previous row, and then tap the grid icon next to the selection menu to open the Average Speed Calculator . There you can enter up to 6 different distances, each with their own separate speed limits.

Change the distance and speed starting with the first row and working from top row to bottom row. After changing and tabbing out of one distance row, the next row will be filled-in with the total distance remaining to be allocated to a speed limit.

Once you are done allocating distances to speeds, tap the Close button at the bottom to close this mini-calculator. This will automatically set the average speed selection menu to the calculated average speed.

Departure date and time:

If you want to have the drive time calculator calculate your estimated date and time of arrival, select your departure date and time.

Optional Entries & Settings:

Click the plus (+) button to expand the optional settings. These include stop times, time zone, fuel cost, and speed comparison settings.

If you would like to adjust the drive time based on any expected stops, you can:

• Enter the total number of minutes in the far right-hand field.
• Select the number of stops and the average hours and minutes for each.
• Tap the Stops button in this row to open a custom stops form where you can customize each individual stop time (hour and minutes).

Note that changing the average hours and minutes will reset the custom stop fields to the average hours and minutes.

Compare average speed:

The results will include a chart comparing the driving and arrival times at speeds above and below the average speed you entered. Change the select menus in this row if you wish to customize the chart.

Destination time zone (DTZ):

If your trip will cover more than one time zone, select the number of hours the destination time zone is ahead or behind the time zone of the starting location.

Fuel cost factors:

If you would like the calculator to estimate your fuel cost for the trip, enter your vehicle's fuel usage rating and the cost per unit of fuel. Both fields must be filled in for the fuel cost to calculate.

MPG: Miles Per Gallon.

KPL: Kilometers Per Liter.

Drive time:

Based on your entries, this is the estimated number of hours and minutes it will take you to reach your destination.

Arrival date and time:

Based on your entries, this the estimated date and time you will arrive at your destination. If you indicated your destination is in a different time zone, this field will include the Destination Time Zone (DTZ) date and time in parenthesis.

Trip fuel cost:

If you completed the fuel related fields optional entry section of the calculator, this line will show the estimated cost of fuel for the trip.

If you would like to save the current entries and results to the device you are using, tap or click on the Data tab and then tap or click on the Save button. If you upgrade your Basic, Local Storage subscription to the Cloud Storage acess level, you can save multiple sets of entries for this calculator to the secure online database, which makes them accessable from any device.

Related Calculators

Help and tools, what time to leave calculator and a driving hours calculator., what time do i have to leave to get there on time.

Once you have used the travel time calculator on this page to get the hours and minutes of your journey, use the following calculator to estimate what time you will have to leave by to get to your destination by a specified time and date.

Note that for every hour you expect to encounter metropolitan rush hour traffic (6am to 10pm or 4pm to 8pm), you may want to add at least 1 hour to your drive time.

Actual Drive Time Calculator

Use the following calculator to total up your actual driving hours for your trip. You can enter start and stop times using am and pm or using military time (leave am/pm blank), or you can enter just the hours and minutes for each segment between stops.

If you have any suggestions for other bonus calculators for this page, please let me know using the expandable feedback form beneath the Drive Time Calculator.

Adjust Calculator Width:

Move the slider to left and right to adjust the calculator width. Note that the Help and Tools panel will be hidden when the calculator is too wide to fit both on the screen. Moving the slider to the left will bring the instructions and tools panel back into view.

Also note that some calculators will reformat to accommodate the screen size as you make the calculator wider or narrower. If the calculator is narrow, columns of entry rows will be converted to a vertical entry form, whereas a wider calculator will display columns of entry rows, and the entry fields will be smaller in size ... since they will not need to be "thumb friendly".

Show/Hide Popup Keypads:

Select Show or Hide to show or hide the popup keypad icons located next to numeric entry fields. These are generally only needed for mobile devices that don't have decimal points in their numeric keypads. So if you are on a desktop, you may find the calculator to be more user-friendly and less cluttered without them.

Stick/Unstick Tools:

Select Stick or Unstick to stick or unstick the help and tools panel. Selecting "Stick" will keep the panel in view while scrolling the calculator vertically. If you find that annoying, select "Unstick" to keep the panel in a stationary position.

If the tools panel becomes "Unstuck" on its own, try clicking "Unstick" and then "Stick" to re-stick the panel.

Travel Time Calculator

Estimated travel time.

These average speeds are based on typical urban travel conditions. Your travel time may vary.

Add this Calculator to Your Site

Understanding Travel Time Calculator: A Comprehensive Guide

Travel planning is an integral part of our daily lives, whether it involves commuting to work, delivering goods, or planning a vacation. A critical aspect of this planning is estimating travel time. The Travel Time Calculator is an invaluable tool in this respect, offering detailed time estimations based on different modes of transportation.

Decoding the Travel Time Calculator

A travel time calculator is a dynamic tool designed to calculate estimated travel time considering various factors such as distance, mode of transport, speed, and possible stops. It takes the hassle out of travel planning by providing accurate time estimates, transforming the way we plan our journeys.

From Sundials to Digital Calculators: A Historical Overview

The idea of calculating time has its roots in antiquity, with traders and explorers estimating their travel times to strategize their journeys. The digitization of this concept came much later with the advent of the internet. Now, we have evolved from simplistic models that considered constant speeds to more sophisticated calculators accounting for variable speeds, different modes of transport, and additional factors that influence travel times.

Step-by-Step Guide: How to Use a Travel Time Calculator?

Using a travel time calculator is easy and intuitive. Here's a quick guide:

• Select your mode of transport: Options typically include walking, cycling, driving, or using public transport.
• Input the total distance to your destination.
• Click the "Calculate" button.
• The tool instantly provides an estimated travel time.

Example Calculations

Let's look at some example calculations using a travel time calculator:

• Walking: If the total distance to your destination is 5 kilometers and your walking speed is 5 km/h, your estimated travel time will be 1 hour.
• Cycling: If the total distance to your destination is 10 kilometers and your cycling speed is 15 km/h, your estimated travel time will be approximately 40 minutes.
• Driving: If the total distance to your destination is 60 kilometers and your average driving speed is 60 km/h, your estimated travel time will be 1 hour.

The Business Perspective: An Indispensable Tool

The travel time calculator has wide-ranging applications in the business world. Logistics companies use it to estimate delivery times, improving their service efficiency. Ride-hailing services utilize it to predict travel times, which are crucial for fare calculations. Travel and tourism businesses use it to design optimal itineraries. Thus, it's a vital tool for businesses requiring any form of travel planning.

Educational Implications: A Learning Tool

In education, travel time calculators can facilitate interactive learning. They serve as practical tools for teaching the concept of speed, distance, and time. Using these calculators, students can solve problems and apply their understanding in real-world contexts, thereby improving their mathematical and logical skills.

Applications in Daily Life

For the everyday user, the travel time calculator is a godsend. It enables efficient journey planning, helps manage time effectively, and reduces the uncertainty associated with travel times. In a time-crunched world, it makes life simpler and travel planning a breeze.

Limitations and Future Potential

While the travel time calculator is an excellent tool, it's not without limitations. The accuracy of travel times can be affected by variable factors such as traffic, weather conditions, and unforeseen delays. However, the future holds promise with advances in artificial intelligence and machine learning that could enable these calculators to consider these variables, providing even more accurate time estimations.

The travel time calculator, despite some limitations, continues to be invaluable for businesses, educational institutions, and individual users. Harness its potential to make your travel planning more efficient and hassle-free.

Drive Time To Distance Calculator

Introduction.

The Drive Time To Distance Calculator is a practical tool that helps individuals and businesses plan their trips and schedules more effectively. By simply inputting the distance to your destination and the average driving speed, this calculator offers you a realistic estimate of the time it will take to get there. Whether you’re a traveler, a logistics manager, or someone planning a daily commute, this tool can be a game-changer in time management.

The formula for calculating drive time based on distance and speed is straightforward:

Drive Time (in hours) = Distance (in miles or kilometers) / Speed (in miles per hour or kilometers per hour)

Here’s a breakdown of the components:

• Distance: This refers to the total distance you need to travel to reach your destination, typically measured in miles or kilometers.
• Speed: The average driving speed at which you intend to travel. It’s essential to use consistent units, either miles per hour or kilometers per hour, to ensure accuracy.

How to Use?

Using the Drive Time To Distance Calculator is a breeze:

• Input Data: Start by entering the distance you need to cover and the average driving speed you intend to maintain.
• Choose Units: Be sure to use consistent units for distance and speed (e.g., miles and miles per hour or kilometers and kilometers per hour).
• Calculate: Click the “Calculate” button, and the tool will instantly provide you with the estimated drive time.
• Plan Accordingly: With the drive time in hand, you can now plan your journey, schedule, or logistics operations with confidence.

Let’s walk through a practical example:

Suppose you need to travel a distance of 300 miles at an average speed of 60 miles per hour. Using the formula:

Drive Time = 300 miles / 60 miles per hour = 5 hours

In this case, the Drive Time To Distance Calculator will inform you that it will take approximately 5 hours to reach your destination.

1. Can this calculator account for traffic or road conditions? No, this calculator provides a basic estimation of drive time based on distance and average speed. It does not consider factors like traffic, road conditions, or stops during the journey.

2. Can I use this calculator for international distances (in kilometers)? Yes, you can use this calculator with distances and speeds measured in kilometers, as long as the units are consistent.

3. How accurate is this calculator in real-world situations? The accuracy of this calculator depends on the accuracy of the data provided and the assumption of a constant driving speed. In real-world scenarios, variations in speed and conditions may affect the actual travel time.

Conclusion:

The Drive Time To Distance Calculator is a valuable tool for anyone looking to estimate the time it takes to reach their destination based on distance and speed. While it provides a simplified estimate, it’s a practical starting point for planning trips, schedules, or logistics. Keep in mind that real-world factors such as traffic and road conditions may influence the actual travel time. Nonetheless, this calculator can significantly aid in better time management and efficient planning, making it an essential tool for those on the go.

Leave a Comment Cancel reply

Save my name, email, and website in this browser for the next time I comment.

• Conversions
• Construction

Calculators » Fun » Travel Time Calculator

Travel Time Calculator

You chose the *Basic version of the Travel Time Calculator.

Create a free account to access the embed code for the Basic version of this calculator!

User information, select additional packages to add to your calculator., lead generation, get this calculator for your site:, travel time formula:, travel time definition.

The Travel Time Calculator will instantly calculate the travel time it takes to get anywhere if you enter the distance to your destination and the average speed you plan to travel. The default units are miles and miles per hour, but the calculator will also work if you use kilometers and kilometers per hour.

If you already know how long it takes (or took) to get to your destination, try our average speed calculator to see what your average speed was.

How to Calculate Travel Time

Let's be honest - sometimes the best travel time calculator is the one that is easy to use and doesn't require us to even know what the travel time formula is in the first place! But if you want to know the exact formula for calculating travel time then please check out the "Formula" box above.

Add a Free Travel Time Calculator Widget to Your Site!

You can get a free online travel time calculator for your website and you don't even have to download the travel time calculator - you can just copy and paste! The travel time calculator exactly as you see it above is 100% free for you to use. If you want to customize the colors, size, and more to better fit your site, then pricing starts at just $29.99 for a one time purchase. Click the "Customize" button above to learn more!

Love our Calculators? Donate to CalculatorPro!

• Privacy Policy

© 2024 Calculator Pro Calculators All Rights Reserved.

Velocity Calculator

What is velocity – velocity definition, the average velocity formula and velocity units, how to calculate velocity – speed vs. velocity, terminal velocity, escape velocity and relativistic velocity.

This velocity calculator is a comprehensive tool that enables you to estimate the speed of an object. If you have ever wondered how to find velocity, here you can do it in three different ways .

• The first one relies on the basic velocity definition that uses the well-known velocity equation.
• The second method calculates what is velocity change caused by acceleration over a specific time interval.
• Finally, the third part of the velocity calculator makes use of the average velocity formula, which may be useful if you need to analyze journeys with various velocities over different distances .

We've also prepared a brief but informative article about velocity itself. Keep reading to learn what is velocity formula and what are the most common velocity units. Did you know that there is an essential difference between speed vs velocity? We've written about it from the point of view of a physicist in the text below.

Velocity definition states that it is the rate of change of the object's position as a function of time. It is one of the fundamental concepts in classical mechanics that considers the motion of bodies. If you want to put this rule down in the form of a mathematical formula, the velocity equation will be as follows:

velocity = distance / time

Keep in mind that this velocity formula only works when an object has a constant speed in a constant direction or if you want to find the average velocity over a certain distance (as opposed to the instantaneous velocity). You have probably noticed that we use the words speed and velocity interchangeably, but you can't do it every time. To learn more about it, head to the speed vs. velocity section.

Aside from the linear velocity, to which we devoted this calculator, there are also other types of velocity, such as rotational or angular velocity with corresponding physical quantities: rotational kinetic energy, angular acceleration, or mass moment of inertia. When an object has only angular velocity, it doesn't displace linearly, and you can't use the average velocity formula, as it only applies to linear movement.

The average velocity formula describes the relationship between the length of your route and the time it takes to travel. For example, if you drive a car for a distance of 70 miles in one hour, your average velocity equals 70 mph. In the previous section, we have introduced the basic velocity equation, but as you probably have already realized, there are more equations in the velocity calculator. Let's list and organize them below:

Simple velocity equation:

Velocity after a certain time of acceleration:

final velocity = initial velocity + acceleration × time

Average velocity formula — the weighted average of velocities:

average velocity = (velocity₁ × time₁ + velocity₂ × time₂ + …) / total time

You should use the average velocity formula if you can divide your route into few segments. For example, you drive a car with a speed of 25 mph for 1 h in the city and then reach 70 mph for 3 h on the highway. What is your average velocity? With the velocity calculator, you can find that it will be about 59 mph .

From the above equations, you can also imagine what are velocity units . British imperial units are feet per second ft/s and miles per hour mph . In the metric SI system, the units are meters per second m/s and kilometers per hour km/h . Remember you can always easily switch between all of them in our tool!

Before we explain how to calculate velocity, we'd like to note that there is a slight difference between velocity and speed. The former is determined by the difference between the final and initial position and the direction of movement, while the latter requires only the distance covered. In other words, velocity is a vector (with the magnitude and direction), and speed is a scalar (with magnitude only).

It's time to use the average velocity formula in practice. Provided an object traveled 500 meters in 3 minutes , to calculate the average velocity, you should take the following steps:

Change minutes into seconds (so that the final result would be in meters per second):

3 minutes = 3 × 60 = 180 seconds

Divide the distance by time:

velocity = 500 / 180 = 2.78 m/s

Let's try another example. You want to participate in a race with your brand-new car that can change its speed with an acceleration of about 6.95 m/s² . The competition just started. What will be your velocity after 4 seconds ?

Set initial velocity to zero; you're not moving at the beginning of the race.

Multiply the acceleration by time to obtain the velocity change:

velocity change = 6.95 × 4 = 27.8 m/s

Since the initial velocity was zero, the final velocity is equal to the change in speed.

You can convert units to km/h by multiplying the result by 3.6:

27.8 × 3.6 ≈ 100 km/h

You can, of course, make your calculations much easier by using the average velocity calculator. All you'll need to do is type in distance and time. One of the advantages of using this calculator is that you don't have to convert any units by hand . Our tool will do it all for you!

Velocity is present in many aspects of physics, and we have created many calculators about it! The first velocity is the so-called terminal velocity , which is the highest velocity attainable by a free-falling object. Terminal velocity occurs in fluids (e.g., air or water) and depends on the fluid's density.

Do you ever wonder what speed is necessary to leave a planet? This speed is called escape velocity and is defined as the smallest speed required for an object to escape the gravitational pull generated by a celestial body, such as a planet, a moon, or a star. Escape velocity is a concept of fundamental importance in astrophysics and in the context of space travel.

In the high energy region, there is another important velocity — relativistic velocity . It results from the fact that no object with a non-zero mass can reach the speed of light. Why? When it approaches light speed, its kinetic energy becomes unattainable, very large, or even infinite. Moreover, this is a cause of other phenomena like relativistic velocity addition, time dilation, and length contraction. Also, Albert Einstein's famous E = mc² formula is based on the relativistic velocity concept.

We hope we've convinced you that velocity plays an essential role in everyday life and not just science, and we hope that you've enjoyed our velocity calculator.

What is the airspeed velocity of an unladen swallow?

Well, that depends if you are talking about the European or African variety. For the European sort, it would seem to be roughly 11 m/s, or 24 mph . If it's our African avian acquaintance you’re after, well, I'm afraid you're out of luck; the jury's still out.

How do you find instantaneous velocity?

• Find an equation that describes how distance ( x ) changes with respect to time ( t ) .
• Differentiate the formula with respect to time.
• Let dx/dt = instantaneous velocity .
• Input the desired time into the differentiated formula. The result is the instantaneous speed at time t .

How long does it take to reach terminal velocity?

It will take the average human approximately 15 seconds to reach 99% of terminal velocity with their belly facing the Earth. Reaching 100% terminal velocity is very difficult, if not impossible, as acceleration drops exponentially as an object approaches its terminal velocity. This time will change if the person changes body position.

Can velocity be negative?

Yes, velocity can be negative . Velocity is directional speed, so if the object is moving opposite to the direction defined as the positive direction, it will be negative. Two objects with equal but opposite velocities have the same speed, but are just moving in opposite directions.

How do you find initial velocity?

To find the initial velocity:

Work out which of the displacement ( s ), final velocity ( v ), acceleration ( a ), and time ( t ) you have to solve for initial velocity (u).

If you have v , a , and t , use:

If you have s , v , and t , use:

u = 2(s/t) — v

If you have s , v , and a , use:

u = √(v² − 2as)

If you have s , a , and t , use:

u = (s/t) − (at/2)

How do you find final velocity?

To compute the final velocity:

Work out which of the displacement ( s ), initial velocity ( u ), acceleration ( a ), and time ( t ) you have to solve for the final velocity ( v ).

If you have u , a , and t , use:

If you have s , u , and t , use:

v = 2(s/t) − u

v = (s/t) + (at/2)

What is escape velocity?

Escape velocity is the minimum speed an object needs to escape another object's gravitational pull . The most common example of this is the speed a spacecraft requires to leave Earth for distant planets, which is approximately 11.2 km/s.

What is the difference between velocity and acceleration?

Velocity is the speed and direction with which an object is moving, while acceleration is how the speed of that object changes with time. The units for velocity are m/s, while for acceleration, they are m/s².

What causes a change in velocity?

Interactions with other objects cause velocity to change . When a moving object collides with another object in its path, it will slow down (if it collides with something smaller, e.g., an air particle) or stop (if it hits a wall). If an object expels matter behind it, it will speed up like a rocket. An object will also accelerate towards other objects via gravity .

How do I calculate escape velocity?

To calculate the escape velocity:

Find the object's mass in kilograms, m , and its radius in meters, r .

Multiply m by the gravitational constant (6.674 × 10 −11 ) and then by 2.

Divide the result of step 2 by r .

Raise the result of step 3 by 0.5. The result is the escape velocity.

Flat vs. round Earth

Helium balloons, porosity and permeability, rocket thrust.

• Biology (100)
• Chemistry (100)
• Construction (144)
• Conversion (295)
• Ecology (30)
• Everyday life (262)
• Finance (570)
• Health (440)
• Physics (510)
• Sports (105)
• Statistics (182)
• Other (182)
• Discover Omni (40)

Average Speed Calculator

Use this speed calculator to easily calculate the average speed of a vehicle: car, bus, train, bike, motorcycle, plane etc. with a given distance and travel time. Returns miles per hour, km per hour, meters per second, etc.

Related calculators

• Average Speed formula
• How to calculate the average speed of a car?
• Finding average speed examples
• Average speed vs Average velocity

    Average Speed formula

The average speed calculation is simple: given the distance travelled and the time it took to cover that distance, you can calculate your speed using this formula:

Speed = Distance / Time

The metric unit of the result will depend on the units you put in. For example, if you measured distance in meters and time in seconds, your output from the average speed calculator would be ft/s. If distance was measured in miles and time in hours, then output will be in miles per hour (mph, mi/h), and so on for km/h, m/s, etc. - all supported by our tool.

    How to calculate the average speed of a car?

Let us say that you travelled a certain distance with your car and want to calculate its average speed. The easiest way to do that would be by using the speed calculator above, but if you prefer, you can also do the math yourself. Either way, one needs to know the distance. If you have noted the distance on your odometer then you can use that number. Other options are to use a map (e.g. Google Maps) and measure the distance travelled based on your actual path (not via a straight line, unless you travelled by air in which case that would be a good approximation), or to use a GPS reading if you used navigation during the whole trip. Then you need to know the travel time. Make sure to subtract any rests or stops made from the total trip duration.

As you can see, to work out your speed in km/h or mph just apply the speed formula with the relevant units for distance and time. This is how to calculate average speed of a car, bike, boat, or any other vehicle or object.

    Finding average speed examples

Example 1: Using the equation above, find the speed of a train which travelled 120 miles in 2 hours and 10 minutes while making four stops, each lasting approximately 2.5 minutes. First, subtract the time spent at the train stops: 2.5 x 4 = 10 minutes. 2:10 minus 10 minutes leaves 2 hours of travel time. Then, apply the avg speed formula to get 120 miles / 2 hours = 60 mph (miles per hour).

Example 2: A cyclist travels to and from work, covering 10 km each way. It took him 25 minutes on the way to work and 35 minutes on the way back. What is the cyclist's average speed? First, add up the time to get 1 hour total. Also add up the distance: 5 + 5 = 10 kilometers. Finally, replace in the formula to get 10 / 1 = 10 km/h (kilometers per hour) on average in total.

    Average speed vs Average velocity

Average speed (what this calculator computes) and average velocity are not necessarily the same thing though they may coincide in certain scenarios. This is basic physics, but a lot of people find it confusing. Here are the differences in short.

Speed is a scalar value whereas velocity is the magnitude of a vector. Speed does not indicate direction whereas velocity does. The two coincide only when the journey from the start point to the end point happens on a straight line, such as in a drag race. If the movement path is not a straight line then the average velocity will be smaller than the mean speed.

Cite this calculator & page

If you'd like to cite this online calculator resource and information as provided on the page, you can use the following citation: Georgiev G.Z., "Average Speed Calculator" , [online] Available at: https://www.gigacalculator.com/calculators/average-speed-calculator.php URL [Accessed Date: 27 Apr, 2024].

     Transportation calculators

• Skip to main content
• Skip to primary sidebar

Distance and Time Taken to Average Speed Calculator

Click save settings to reload page with unique web page address for bookmarking and sharing the current tool settings

✕ clear settings

Flip tool with current settings and calculate total distance or time

Related Tools

• Estimate travel time
• Travel distance calculator
• Convert speed into different units
• Convert distance into different units
• Convert time duration into different units

Calculate average speed of a moving object from the total distance travelled and the time taken from start to finish.

Once you have entered a distance and a time period the average speed will appear in the answer box and two conversion scale will also show a range of values for distance versus speed and time versus speed.

This tool calculates average speed using the following formula:

• d = Distance

Distance Travelled

Enter the actual distance that is travelled by a moving object in any unit of distance measurement.

Enter the time taken to complete the distance travelled in any measurement unit of time.

Average Speed

This is the speed that a moving object would need to maintain without variation, in order to complete the distance travelled in the same period of time.

Applications

Examples of types of average speed calculations:

• Convert a journey distance in kilometres and the time taken in hours, to an average speed in mph.
• Determine the average speed of a runner in mph, from a track run distance in metres, and the stopwatch time in minutes or seconds.
• Calculate a training speed to complete a cycling route within a target period of time.

• Calculators
• Construction Math
• Interior Finishing
• Roofing Materials
• Siding - Cladding
• Lumber and Timber
• Orchard and Vineyard
• Tanks and Containers
• Area & Perimeter
• Pools & Ponds
• Turf & Top Soil
• Fractions & Decimals

Conversions

• Fuel & Distance
• Inch Related Calculators
• Tools & Equipment
• Volume and Surface Area
• Getting Started
• Footing & Foundation
• Exterior Finishing
• Tables & Lists

Time from a Distance in Nautical Miles and Speed in Knots

Calculate the time it takes to travel a certain distance in nautical miles based on a speed in knots. A knot is a unit of speed equal to one nautical mile per hour. The symbol used for a knot is kn or kt.

Time from Speed and Distance Knots/Nautical Miles

• enter the distance in nautical miles
• the speed in knots
• the distance in nautical miles converted to kilometres
• the distance in nautical miles converted to miles
• knots converted to metres per second
• knots converted to feet per second
• the time in seconds
• the time in minutes
• the time in decimal hours
• the time in an hour, minute, and second format

Example Calculation

Time from speed and distance calculators.

• Kilometres and Speed in Feet per Minute
• Kilometres and Speed in Feet per Second
• Kilometres and Speed in Kilometres per Hour
• Kilometres and Speed in Knots
• Kilometres and Speed in Metres per Minute
• Kilometres and Speed in Metres per Second
• Kilometres and Speed in Miles per Hour
• Miles and Speed in Feet per Minute
• Miles and Speed in Feet per Second
• Miles and Speed in Kilometres per Hour
• Miles and Speed in Knots
• Miles and Speed in Metres per Minute
• Miles and Speed in Metres per Second
• Miles and Speed in Miles per Hour
• Nautical Miles and Speed in Feet per Second
• Nautical Miles and Speed in Knots
• Nautical Miles and Speed in Metres per Second

Mileage Calculator

Use the following mileage calculator to determine the travel distance, in terms of miles, and time taken by car to travel between two locations in the United States, disregarding traffic conditions.

Advertisement

Supported by

A Brief Guide to Who’s Who on Taylor Swift’s ‘Tortured Poets’

Ex-boyfriends may be alluded to. Travis Kelce, too, fans believe. And some actual poets.

• Share full article

By Madison Malone Kircher

When Taylor Swift released “The Tortured Poets Department,” on Friday at midnight, her fan base quickly got to work decoding the album, looking for layers of meaning and insight into Ms. Swift’s life. Of course, that includes the pop singer’s romantic history.

Like many of her past works, the songs on this album — which features over a dozen additional tracks as part of an extended album called “The Tortured Poets Department: The Anthology” — are laden with names and references, many of which appear to be to real people from Ms. Swift’s universe and the literary canon. At least two poets, Dylan Thomas and Patti Smith, are mentioned.

Here’s a look at some of those characters.

Matty Healy

Plenty of lines from “Tortured Poets” have fans guessing that certain songs — including “The Smallest Man Who Ever Lived,” “The Black Dog” and “Down Bad” — may be about Matty Healy , the frontman for the 1975 who was spotted out and about with Taylor on several occasions last spring. One clue Swifties are latching on to: On the “The Black Dog,” Ms. Swift refers to the band the Starting Line. Mr. Healy covered one of the band’s songs while he was touring last spring. And then there is the much-discussed reference to a person Ms. Swift describes as a “tattooed golden retriever" on the album’s title track. Mr. Healy seems to fit the bill, according to her fans.

Travis Kelce

Ms. Swift’s fans have been floating the notion that the many sports references in the track “The Alchemy” allude to the football player Travis Kelce , the singer’s current boyfriend. “So when I / Touch down, call the amateurs and cut ’em from the team / Ditch the clowns, get the crown, baby, I’m the one to beat," she sings in the chorus. “Where’s the trophy? / He just comes running over to me,” she adds in the bridge. But there is some debate, with some fans noting that her use of the term “blokes” would seem to imply the song is not about an American. (A winking line about “heroin but this time with an E” has some guessing the song is about Mr. Healy, who has previously spoken about his drug use.)

Ms. Swift and the actor Joe Alwyn broke up last year after a lengthy relationship. In the lead-up to the release of “Tortured Poets,” many fans believed this new album would process the end of that relationship. (Mr. Alwyn said in a 2022 interview that he was in a group text chat with the actors Paul Mescal and Andrew Scott called “ The Tortured Man Club .” Some fans believe Ms. Swift was nodding to this name with her latest album title.) There is some speculation that Track 5, “So Long, London,” is about Mr. Alwyn, who is British.

Jack Antonoff

A longtime collaborator of Ms. Swift’s, Jack Antonoff, who is credited as a producer on many of the new album’s songs, appears to get a lyrical shout out on the album’s title track.

The musician Lucy Dacus also appears on that same track. (In addition to her work as a solo artist, Ms. Dacus is a member of the supergroup boygenius, who surprised fans with a performance during a stop on Ms. Swift’s Eras tour last year.) “Sometimes, I wonder if you’re gonna screw this up with me / But you told Lucy you’d kill yourself if I ever leave / And I had said that to Jack about you, so I felt seen,” Ms. Swift sings.

Kim Kardashian

Ms. Swift often leaves clues for fans by capitalizing seemingly random letters in words which, when strung together, spell a different word. In the case of this album, the song “thanK you aIMee,” seems to reveal the name Kim. (Ms. Swift and Kim Kardashian have a long and unfriendly history .)

In Greek mythology, Cassandra is given the gift of prophecy by Apollo, but is cursed such that no one will ever believe her. On a song with the same name as the goddess, Ms. Swift sings, “So they killed Cassandra first / ’Cause she feared the worst / And tried to tell the town / So they filled my cell with snakes, I regret to say / Do you believe me now?” Snake emojis have also played a key role in the feud between Ms. Swift and Ms. Kardashian.

Charlie Puth

The singer-songwriter Charlie Puth gets a name drop on the title track: “You smoked then ate seven bars of chocolate / We declared Charlie Puth should be a bigger artist.” Mr. Puth, through a representative, declined to comment.

The song “Peter” appears to refer to the storybook character Peter Pan. “You said you were gonna grow up / Then said you were gonna come find me,” Ms. Swift sings. She has made similar allusions in the past, including a line about “Peter losing Wendy” on her song “cardigan” in 2020.

Patti Smith

The American singer, songwriter, poet and author Patti Smith gets a name check on the title track in a line about New York’s iconic Chelsea Hotel , where she once lived. Ms. Smith has been hailed as the “ punk poet laureate .”

Dylan Thomas

The Welsh poet, known for works like “Do not go gentle into that good night,” is also mentioned along with Ms. Smith. “You’re not Dylan Thomas / I’m not Patti Smith / This ain’t the Chelsea Hotel / We’re modern idiots,” Ms. Swift sings. Thomas, who was also a resident at the Chelsea, is famous for his work as a neo-Romantic poet. (Ms. Swift has an older song, from her album “1989,” titled “New Romantics.”)

Clara Bow, an actress from the silent film era known as the first “it girl,” has an entire song dedicated to her on “Tortured Poets.” In 1927, Bow starred in a film titled “It” and became a national sex symbol before leaving the industry. Fans have pointed out that Ms. Swift’s thinly drawn eyebrows in a video teasing a new music video to accompany the song “Fortnight” bear a striking similarity to Ms. Bow’s.

Stevie Nicks

Stevie Nicks is named on the song “Clara Bow.” Ms. Nicks has said that Ms. Swift’s song “You’re on Your Own Kid” reminds her of Christine McVie, her Fleetwood Mac bandmate who died in 2022 . “You look like Stevie Nicks / In ’75, the hair and lips,” Ms. Swift sings in the song. (Ms. Nicks also wrote an original poem that accompanies a special vinyl edition of “Tortured Poets.”)

Madison Malone Kircher is a Times reporter covering internet culture. More about Madison Malone Kircher

Inside the World of Taylor Swift

A Triumph at the Grammys: Taylor Swift made history  by winning her fourth album of the year at the 2024 edition of the awards, an event that saw women take many of the top awards .

‘The T ortured Poets Department’: Poets reacted to Swift’s new album name , weighing in on the pertinent question: What do the tortured poets think ?  

In the Public Eye: The budding romance between Swift and the football player Travis Kelce created a monocultural vortex that reached its apex  at the Super Bowl in Las Vegas. Ahead of kickoff, we revisited some key moments in their relationship .

Politics (Taylor’s Version): After months of anticipation, Swift made her first foray into the 2024 election for Super Tuesday with a bipartisan message on Instagram . The singer, who some believe has enough influence  to affect the result of the election , has yet to endorse a presidential candidate.

Conspiracy Theories: In recent months, conspiracy theories about Swift and her relationship with Kelce have proliferated , largely driven by supporters of former President Donald Trump . The pop star's fans are shaking them off .

Driving Distance Calculator

Driving distances between two cities.

Travelmath helps you find driving distances based on actual directions for your road trip. You can get the distance between cities, airports, states, countries, or zip codes to figure out the best route to travel to your destination. Combine this information with the fuel cost tool to find out how much it will cost you to drive the distance, or compare the results to the straight line distance to determine whether it's better to drive or fly. You can print out pages with a travel map.

Maybe you want to see the driving time instead? Or if you're driving a long distance, you might want to check the midpoint of your trip to find a hotel.

Home  ·  About  ·  Terms  ·  Privacy

We've detected unusual activity from your computer network

To continue, please click the box below to let us know you're not a robot.

Why did this happen?

Please make sure your browser supports JavaScript and cookies and that you are not blocking them from loading. For more information you can review our Terms of Service and Cookie Policy .

For inquiries related to this message please contact our support team and provide the reference ID below.

King Charles to resume public duties after 'progress' in cancer treatment

LONDON — Britain’s King Charles III will resume public duties next week for the first time since his cancer diagnosis almost three months ago, Buckingham Palace announced Friday.

Charles “will shortly return to public-facing duties after a period of treatment and recuperation,” the palace said in a statement. The palace also revealed that the king’s medical team is “very encouraged” by the progress of his recovery but did not disclose any further details.

Joined by Queen Camilla, the king will visit an unnamed cancer center Tuesday and meet medical specialists and patients.

“This visit will be the first in a number of external engagements his majesty will undertake in the weeks ahead,” the palace said in a statement. He will also receive Japanese Emperor Naruhito for a state visit in June.

Ahead of the anniversary of Charles’ coronation May 6, he and the queen “remain deeply grateful for the many kindnesses and good wishes they have received from around the world throughout the joys and challenges of the past year,” the statement added.

Charles, 75, has been restricting himself to private duties since being diagnosed in February with an unspecified form of cancer . Doctors discovered the cancer after the king was hospitalized with an enlarged prostate, although the palace says that he does not have prostate cancer.

The king’s “treatment program will continue” and “doctors are  sufficiently pleased with the progress made so far,” the palace said Friday. “It is early to say” how much longer the king’s medical treatment will last, it said, but his medical team is "very encouraged by the progress made so far and remain positive about the king’s continued recovery.”

Though Charles is resuming duties, “it will not be a full summer program” and “will remain subject to doctors’ advice,” it said, adding that he “is greatly encouraged to be resuming some public-facing duties and very grateful to his medical team for their continued care and expertise.”

The king’s shocking diagnosis has heralded a fragile period for Britain’s royals.

Kate, the Princess of Wales, revealed last month that she, too, was being treated for cancer . Weeks of speculation over her health and whereabouts were only fueled when her team posted a photo that had been manipulated by the princess.

Kate, 42, is receiving what her team described as preventive chemotherapy . But both she and Charles have declined to specify either what type of cancer they have or details about their prognosis.

Their convalescence has left the royals somewhat shorthanded.

Shorn of their widely popular talisman, Queen Elizabeth II, after her death in 2022, the family is also down some would-be workhorses in Prince Harry and his wife, Meghan, the Duchess of Sussex, as well as Prince Andrew.

Kensington Palace said that Kate would return to the public eye after Easter, although that public holiday has come and gone with little sign of the princess.

Unlike Kate, who has not made an official public appearance since late December, Charles returned to the public eye at the Easter Sunday service in Windsor last month. “You’re very brave to stand out here in the cold,” he told members of the crowd as he greeted well-wishers on what was a chilly day.

Nevertheless, the king has been frustrated with the length of time his recovery is taking, according to his nephew Peter Phillips.

The saga has also highlighted a disconnect between the royals’ expectation of privacy and demands by the public for information and accountability from the institution they help fund.

The king has received some praise for revealing his cancer diagnosis at all, a level of candor that was markedly absent when it came to royals past. Charles’ grandfather King George VI died from a lung cancer that was kept from the public, press and perhaps even the monarch himself.

Charles said he wanted to go public about his treatment to encourage other men to get themselves checked. And the page for “enlarged prostate” on the website of Britain’s National Health Service received 11 times more traffic following his announcement, the National Health Service said.

However, some doctors and other medical commentators questioned the wisdom of keeping the specific type of cancer secret: How are people supposed to get themselves checked out for a disease that has myriad different forms and symptoms?

Charles’ swift diagnosis and treatment have also highlighted the dilapidated state of the NHS itself, a taxpayer-funded institution that’s historically been a source of pride for Brits, thanks to it being universally free at the point of access. Years of budget cuts mean the NHS is creaking, and waiting times and survival rates for cancers across the board have slipped in comparison with other countries.

Alexander Smith is a senior reporter for NBC News Digital based in London.

Distance Traveled at 75 Miles Per Hour

Search calculateme.

April 22, 2024

Making history: brightline west breaks ground on america’s first high-speed rail project connecting las vegas to southern california  , officials hammer the first spike commemorating the groundbreaking for brightline west.

LAS VEGAS (April 22, 2024)  – Today, Brightline West officially broke ground on the nation's first true high-speed rail system which will connect Las Vegas to Southern California. The 218-mile system will be constructed in the middle of the I-15 and is based on Brightline’s vision to connect city pairs that are too short to fly and too far to drive. Hailed as the greenest form of transportation in the world, Brightline West will run zero emission, fully electric trains capable of speeds of 200 miles per hour. Brightline West is a watershed project for high-speed rail in America and will establish the foundation for the creation of a new industry and supply chain. The project was recently awarded $3 billion in funding from President Biden’s Bipartisan Infrastructure Bill. The rest of the project will be privately funded and has received a total allocation of $3.5 billion in private activity bonds from USDOT.

The groundbreaking included remarks from U.S. Transportation Secretary Pete Buttigieg, Brightline Founder Wes Edens, Nevada Gov. Joe Lombardo, Sen. Catherine Cortez Masto, Sen. Jacky Rosen, Senior Advisor to President Biden Steve Benjamin and Vince Saavedra of the Southern Nevada Building Trades. In addition, Nevada Reps. Dina Titus, Susie Lee and Steve Horsford and California Reps. Pete Aguilar and Norma Torres made remarks and joined the celebration. More than 600 people, including union representatives, project supporters and other state and local officials from California and Nevada, attended the event.

“People have been dreaming of high-speed rail in America for decades – and now, with billions of dollars of support made possible by President Biden’s historic infrastructure law, it’s finally happening,” said Secretary Buttigieg. “Partnering with state leaders and Brightline West, we’re writing a new chapter in our country’s transportation story that includes thousands of union jobs, new connections to better economic opportunity, less congestion on the roads, and less pollution in the air.”

“This is a historic project and a proud moment where we break ground on America’s first high-speed rail system and lay the foundation for a new industry,” said Wes Edens, Brightline founder. “Today is long overdue, but the blueprint we’ve created with Brightline will allow us to repeat this model in other city pairs around the country.”

CONSTRUCTION OF BRIGHTLINE WEST

Brightline West's rail system will span 218 miles and reach speeds of 200 mph. The route, which has full environmental clearance, will run within the median of the I-15 highway with zero grade crossings. The system will have stops in Las Vegas, Nev., as well as Victor Valley, Hesperia and Rancho Cucamonga, Calif.

The privately led infrastructure project is one of the largest in the nation and will be constructed and operated by union labor. It will use 700,000 concrete rail ties, 2.2 million tons of ballast, and 63,000 tons of 100% American steel rail during construction. Upon completion, it will include 322 miles of overhead lines to power the trains and will include 3.4 million square feet of retaining walls. The project covers more than 160 structures including viaducts and bridges. Brightline West will be fully Buy America Compliant.

STATIONS AND FACILITIES

Brightline West will connect Southern California and Las Vegas in two hours or almost half the time as driving. The Las Vegas Station will be located near the iconic Las Vegas Strip, on a 110-acre property north of Blue Diamond Road between I-15 and Las Vegas Boulevard. The site provides convenient access to the Harry Reid International Airport, the Las Vegas Convention Center and the Raiders’ Allegiant Stadium. The station is approximately 80,000 square feet plus parking.

The Victor Valley Station in Apple Valley will be located on a 300-acre parcel southeast of Dale Evans Parkway and the I-15 interchange. The station is intended to offer a future connection to the High Desert Corridor and California High Speed Rail. The Victor Valley Station is approximately 20,000 square feet plus parking.

The Rancho Cucamonga Station will be located on a 5-acre property at the northwest corner of Milliken Avenue and Azusa Court near Ontario International Airport. The station will be co-located with existing multi-modal transportation options including California Metrolink, for seamless connectivity to Downtown Los Angeles and other locations in Los Angeles, Orange, San Bernardino and Riverside Counties. The Rancho Cucamonga Station is approximately 80,000 square feet plus parking.

The Hesperia Station will be located within the I-15 median at the I-15/Joshua Street interchange and will function primarily as a local rail service for residents in the High Desert on select southbound morning and northbound evening weekday trains.

The Vehicle Maintenance Facility (VMF) is a 200,000-square-foot building located on 238 acres in Sloan, Nev., and will be the base for daily maintenance and staging of trains. This site will also serve as one of two hubs for the maintenance of way operations and the operations control center. More than 100 permanent employees will report on a daily basis once operations begin and will serve as train crews, corridor maintenance crews, or operations control center teammates. A second maintenance of way facility will be located adjacent to the Apple Valley station.

The Las Vegas and Southern California travel market is one of the nation’s most attractive corridors with over 50 million trips between the region each year. Additionally, Las Vegas continues to attract visitors from around the world, with 4.7 million international travelers flying into the destination. The city dubs itself on being the world’s No. 1 meeting destination, welcoming nearly 6 million people to the Las Vegas Convention Center last year.

In California, approximately 17 million Southern California residents are within 25 miles of the Brightline West station sites. Studies show that one out of every three visits to Las Vegas come from Southern California.

ECONOMIC & ENVIRONMENTAL BENEFITS

Brightline West's $12 billion infrastructure investment will create over $10 billion in economic impact for Nevada and California and will generate more than 35,000 jobs, including 10,000 direct union construction roles and 1,000 permanent operations and maintenance positions. The investment also includes over $800 million in improvements to the I-15 corridor and involves agreements with several unions for skilled labor. The project supports Nevada and California's climate goals by offering a no-emission mobility option that reduces greenhouse gasses by over 400,000 tons of CO2 annually – reducing vehicle miles traveled by more than 700 million each year and the equivalent of 16,000 short-haul flights. The company will also construct three wildlife overpasses, in partnership with the California Department of Fish and Wildlife and Caltrans for the safe passage of native species, primarily the bighorn sheep.

BRIGHTLINE FLORIDA

Brightline’s first rail system in Florida connecting Miami to Orlando began initial service between its South Florida stations in 2018. In September 2023, Brightline’s Orlando station opened at Orlando International Airport, connecting South Florida to Central Florida. The company has plans to expand its system with future stops in Tampa, Florida’s Space Coast in Cocoa and the Treasure Coast in Stuart.

BRIGHTLINE WEST

ABOUT BRIGHTLINE WEST

Brightline is the only private provider of modern, eco-friendly, intercity passenger rail service in America – offering a guest-first experience designed to reinvent train travel and take cars off the road by connecting city pairs and congested corridors that are too short to fly and too long to drive. Brightline West will connect Las Vegas and Southern California with the first true high-speed passenger rail system in the nation. The 218-mile, all-electric rail service will include a flagship station in Las Vegas, with additional stations in Victor Valley and Rancho Cucamonga. At speeds up to 200 miles per hour, trains will take passengers from Las Vegas to Rancho Cucamonga in about two hours, twice as fast as the normal drive time.

Brightline is currently operating its first passenger rail system connecting Central and South Florida with stations in Miami, Aventura, Fort Lauderdale, Boca Raton, West Palm Beach, and Orlando, with future stations coming to Stuart and Cocoa. For more information, visit  www.brightlinewest.com  and follow on  LinkedIn ,  X ,  Instagram  and  Facebook .

QUOTE SHEET

“Through this visionary partnership, we are going to create thousands of jobs, bring critical transportation infrastructure to the West, and create an innovative, fast, and sustainable transportation solution. Nevada looks forward to partnering with Brightline on this historic project.”  - Governor Joe Lombardo, Nevada

“Today, not only are we breaking ground on a historic high-speed rail project here in Nevada, we are breaking ground on thousands of good paying American jobs, union jobs.”  - Steve Benjamin, Senior Advisor to the President and Director of the White House Office of Public Engagement

“For decades, Nevadans heard about the promise of high-speed rail in our state, and I’m proud to have led the charge to secure the funding to make it a reality. Today’s groundbreaking is the beginning of a new era for southern Nevada -- creating thousands of good-paying union jobs, bringing in billions of dollars of economic development, enhancing tourism to the state, reducing traffic, and creating a more efficient and cleaner way to travel. This is a monumental step, and I’m glad to have worked across the aisle to make this project come true.”  - Senator Jacky Rosen (D-NV)

“Having high-speed rail in Las Vegas will electrify our economy in Southern Nevada, and I’m thrilled to celebrate this milestone today. This project is on track to create tens of thousands of good-paying union jobs while cutting down traffic on I-15, and I’ll keep working with the Biden Administration to get this done as quickly as possible and continue delivering easier and cleaner transportation options for everyone in Nevada.”  - Senator Catherine Cortez Masto (D-NV)

“Today’s groundbreaking is a historic step in modernizing rail service in the United States. Californians driving between the Los Angeles region and Las Vegas often face heavy traffic, causing emissions that pollute the air in surrounding communities. The Brightline West Project will provide travelers with more options—helping Californians and visitors alike get to their final destination without facing gridlock on the road.”  - Senator Alex Padilla (D-Calif.)

"High-speed rail in the Southwest has been a dream as far back as the nineties when Governor Bob Miller appointed me to the California-Nevada Super Speed Train Commission. As a senior Member of the House Transportation & Infrastructure Committee, I am honored to have helped write the Bipartisan Infrastructure Law and secure $3 billion to turn that dream into a reality which will generate millions of dollars in tax revenue, reduce carbon emissions by easing traffic on Interstate 15, and create thousands of good-paying union jobs. I am proud to stand with advocates and transportation leaders as we break ground on the Brightline West project and look forward to welcoming high-speed passenger rail to Southern Nevada."  - Congresswoman Dina Titus (NV-1)

“For decades, high-speed rail was just a dream in southern Nevada – but now, I’m beyond proud that we finally made it a reality. I worked across the aisle to help negotiate, craft, and ultimately pass the Bipartisan Infrastructure Law because I knew it would kickstart transformative projects like Brightline West that will stand the test of time. Together, we’re cutting down on traffic, boosting our tourism economy, and creating thousands of good-paying union jobs.”  - Congresswoman Susie Lee (NV-3)

“I am proud to join Brightline West for the groundbreaking of this monumental project for Southern Nevada and the southwestern United States. By connecting Las Vegas to Southern California via high-speed rail, we will boost tourism, reduce congestion on the I-15 corridor, and create jobs. The impact on our local economy and the people of the Silver State will be tremendous. In my conversations with Secretary Buttigieg, Brightline West, and our Nevada labor leaders, I know that local workers and our Nevada small businesses will benefit from this transformational investment. This will be the nation's first true high-speed rail system, blazing a new path forward for our nation’s rail infrastructure, and we hope it will serve as a blueprint for fostering greater regional connections for many other cities across the country.  - Congressman Steven Horsford (NV-4)

“Brightline West’s groundbreaking today marks the construction of a dynamic high-speed rail system that will link Las Vegas, Hesperia, and Apple Valley to Rancho Cucamonga’s Metrolink Station, creating new jobs and fostering economic growth in California’s 23rd Congressional District. This convenient alternative to driving will reduce the number of cars on the road, decreasing emissions and reducing congestion in our High Desert communities. This is an exciting step and I look forward to the completion of this project.”  - Congressman Jay Obernolte (CA-23)

"Today's groundbreaking on the Brightline West high-speed rail project marks an incredible milestone in the Biden-Harris Administration's commitment to fulfilling the promise of high-speed rail and emissions-free transportation across the country. As a longtime supporter of this project, I helped pass the Bipartisan Infrastructure Law, which has already invested over $3 billion to support the completion of this project. By increasing transportation options, spurring job creation and new economic opportunities, and improving our environment through cutting over 400,000 tons of carbon pollution each year, this project will be transformative to my district and all of Southern California for generations—particularly in and around the last stop in Rancho Cucamonga. With the goal of being operational in time for Los Angeles to host the Summer Olympic Games in 2028, I look forward to Brightline West facilitating travel for the millions visiting our region and elevating our 21st-century connectivity on the global stage."  - Congresswoman Judy Chu (CA-28)

"As the Member of Congress that represents the City of Rancho Cucamonga and a member of the House Appropriations Subcommittee on Transportation, Housing, and Urban Development, it is my honor to participate in breaking ground on one of the most highly anticipated high-speed rail projects in the country. We gathered today thanks to the Biden Administration's leadership, which enacted the Bipartisan Infrastructure Law and the Inflation Reduction Act to fund vital projects like this and transform our economy. The Brightline project is a stellar illustration of the power of successful public-private partnerships. Thanks to all the labor unions, Tribes, and wildlife advocates for their hard work, which brought this project to life. The bright line is fully electric and has zero emissions, which is excellent for our environment. I am eagerly anticipating the completion of this project in my district and look forward to seeing everyone there."  - Congresswoman Norma J. Torres (CA-35)

Media Contact

Vanessa Alfonso [email protected]