2013 dodge journey alternator fuse location

Fuse Box Diagrams

All automotive fuse box diagrams in one place

Dodge Journey (2011-2019) fuses

Ad vertisements

In this article, we consider the first-generation Dodge Journey after a facelift, available from 2011 to the present. Here you will find fuse box diagrams of Dodge Journey 2011, 2012, 2013, 2014, 2015, 2016, 2107, 2018 and 2019 , get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout).

See other Dodge Journey:

Fuse Layout Dodge Journey 2011-2019

Cigar lighter (power outlet) fuses in the Dodge Journey are the fuses F102, F103 and F106 in the Instrument panel fuse box.

Table of Contents

Interior Fuses

Fuse box location.

Fuse Box Diagram

Underhood Fuses (Power Distribution Center)

Learn more:

CarParts.com will be back soon!

We apologize for the inconvenience. The CP Team is working on some upgrades to improve our service. Thank you for using CarParts.com!

You can call us at

1-866-529-0412

Reference ID: 18.3785655f.1714477680.6e7af626

• Remember me Not recommended on shared computers

Forgot your password?

• Electrical, Battery & Charging

Alternator fuse? need help

By richard033 February 13 in Electrical, Battery & Charging

• Reply to this topic
• Start new topic

Recommended Posts

New to this forum, and beeing from the netherlands forgive me for writing erors.

I do have a 2009 Dodge 2.4, the alternator died a few weeks ago and this weekend we replaced it with a new Redix alternator, and also replaced the battery.

But is doesn't charge the battery, no voltage on the alternator with a running engine.

Is there a fus that could be blown? checked the fuses in the fuse box and they seem to be OK. I know some cars have a big fuse between the alternator and the battery, does my Dodge have one? and where is it located? I can't find any info on the internet

Hope someone can help before i have to go to a expensive mechanic, i'd rather spend my money on US vacations.

greetings Richard

Link to comment

Share on other sites.

have you had the new alt checked to make sure it is charging,,even new can be bad...also might want to go with OEM 

13 minutes ago, 2late4u said: have you had the new alt checked to make sure it is charging,,even new can be bad...also might want to go with OEM 

We did not check the alternator before install, but we just found out there is no connection between the alternator and the battery, one of my neighbours who is a experienced technician (roadside service) did measure the cable and no go.

So maybe a blown fuse on that cable, but we can't find one, so tomorow we are going to instal a new cable and find out.

Also prefer OEM but those Dodge altenators are very expensive and very hard to find. 

John/Horace

No voltage where on alternator. Both large cable with the high amp output and the smaller wire on the push plug (trigger wire) from battery should show close to  dc voltage when car is running.  

Large alt fuse should be located on fuse box under hood. 

55 minutes ago, John/Horace said: Large alt fuse should be located on fuse box under hood. 

 Can anyone post a picture of the Large alt fuse? we can't find it?

Looks like there isn’t t a typical large 120 amp fuse for alternator. But there is a fusible link in the system.

Unusual set up. TIPM controlling chargingI think.  

More info about charging system . This guy rewired things and added a std fuse.

Thanks for the info John, do you know where it is located?

Looks like large gauge red running from alternator. Need to use multi meter and check continuity, resistance. Alternator needs 12 volts fed  from battery to generate the 160 amps for the whole car.

The results so far! Nothing.

We did run a wire between the alternator and the battery, stil not charging, Then my experienced roadside mechanic neighbour did use a amp meter and that also showed nothing, see picture.

Now i'm trying tot get another replacement altenator from autodoc

Fusible link is with th the big stud on the starter solenoid.

Also check for 5 volt on the small 2 wire connector to the alternator. This problem has been hashed out many times on the forum and videos posted of testing/repairing this problem. It is the same for all years having the 2.4 {4 cylinder} motor.

5 hours ago, 5rebel9 said:   Fusible link is with th the big stud on the starter solenoid. Also check for 5 volt on the small 2 wire connector to the alternator. This problem has been hashed out many times on the forum and videos posted of testing/repairing this problem. It is the same for all years having the 2.4 {4 cylinder} motor.

Fusible link is bypassed for testing.

a link would be helpfull for the other posts about this problem

• 1 month later...

Turns out our ECU is broken, i did find another used one, but is it a simple swap or does it need programming for the keys?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account. Note: Your post will require moderator approval before it will be visible.

×   Pasted as rich text.    Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.    Display as a link instead

×   Your previous content has been restored.    Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

• Insert image from URL
• Submit Reply
• Existing user? Sign In

More Forum Apps

• Online Users
• Leaderboard

|| Forum Activity ||

• All Activity
• Create New...

• You are here:  

Dodge Journey 2013 Fuse Box

Fuse box informations | cars.

Dodge Journey 2013 Fuse Box Info

Passenger fuse box location:

The interior fuse box is located on the passenger side under the glove box.

Engine compartment fuse box:

Fuse Box Diagram | Layout

Passenger compartment fuse box:

Engine compartment fuse box:

• Dodge Journey

Related Vehicles

Dodge durango 2024 fuse box, ram chassis cab 2024 fuse box, dodge ram 1500 2024 fuse box.

• Opel Combo 2023 Fuse Box 30 April 2024
• Opel Combo 2022 Fuse Box 30 April 2024
• Opel Combo 2021 Fuse Box 30 April 2024
• Opel Combo 2020 Fuse Box 30 April 2024

Fuse Box Info

• Dodge Ram 1500 2020 Fuse Box
• Jeep Compass 2018 Fuse Box
• Jeep Grand Cherokee 2021 Fuse Box
• Dodge Ram 2500 2020 Fuse Box
• Jeep Grand Cherokee 2020 Fuse Box
• Dodge Ram 1500 2019 Fuse Box

Fuses | Relays | Location | Diagram

• Motorcycles

• [ 7 August 2022 ] Chevy G30 (1988 – 1992) – fuse box diagram Chevy
• [ 7 August 2022 ] Chevy G20 (1988 – 1992) – fuse box diagram Chevy
• [ 5 August 2022 ] GMC Vandura (1988 – 1992) – fuse box diagram Bez kategorii
• [ 31 July 2022 ] Infiniti Q45 (2002 – 2006) – fuse box diagram Infiniti
• [ 26 July 2022 ] Infiniti Q45 (1997 – 2001) – fuse box diagram Infiniti

Dodge Journey (2011 – 2013) – fuse box diagram

8 July 2018 admin Dodge , Journey 0

Year of production: 2011, 2012, 2013

Power outlet fuses

Interior Fuses

The interior fuse panel is located on the passenger side under the instrument panel.

Underhood Fuses (Power Distribution Center)

The power distribution center is located in the engine compartment.

WARNING: Terminal and harness assignments for individual connectors will vary depending on vehicle equipment level, model, and market.

• Electrical Distribution

Related Articles

MG ZS – fuse box diagram

MG ZS – fuse box diagram Year of production: Location Passenger Compartment Fuse Box（below the glove box at the front passenger side Engine Compartment Fuse Box（at the left side of the Engine Compartment Passenger Compartment Fuse Box […]

Pontiac Grand Am (1994) – fuse box diagram

Pontiac Grand Am (1994) – fuse box diagram Year of production: 1994 Instrument Panel Fuse Block – Driver’s Side The main fuse panel is located on the left side of the instrument panel. Fuses Ampere […]

Skoda Roomster (2013) – fuse box diagram

Skoda Roomster (2013) – fuse box diagram Year of production: 2013 Fuse box in dashboard Number Power consumer 1 S-contact 2 START-STOP, air-conditioning system 3 Instrument cluster, headlight range adjustment 4 Control unit for ABS, […]

Copyright © 2024 | MH Magazine WordPress Theme by MH Themes

Dodge Journey Alternator

This post contains affiliate links. This means I will make a commission at no extra cost to you should you click through and make a purchase [ “As an Amazon Associate, I earn from qualifying purchases.” ]. Read the full disclosure here .

Dodge Journey Alternator GuideMechanic.Com Are you experiencing issues with your Dodge Journey’s alternator? Don’t worry; you’ve come to the right place.

In this comprehensive guide, we will delve into all the essential aspects of the Dodge Journey alternator, providing you with a thorough understanding of its functions, common problems, maintenance tips, and more. So, buckle up and get ready to explore the world of the Dodge Journey alternator!

When it comes to the electrical system of your vehicle, the alternator plays a vital role. Acting as a generator, it is responsible for supplying power to various electrical components, charging the battery, and maintaining a stable voltage. However, like any other mechanical part, the Dodge Journey alternator is not immune to problems.

Understanding the Alternator: How Does it Work?

In this section, we will provide an in-depth explanation of how the Dodge Journey alternator functions. From its basic components to the intricate workings, we will leave no stone unturned. You will gain valuable insights into the alternator’s role in your vehicle’s electrical system.

Components of a Dodge Journey Alternator

The Dodge Journey alternator consists of several key components that work together to generate electricity.

See Also: P0562 Dodge Journey: Causes and Fixes

These components include the rotor, stator, diode bridge, voltage regulator, and pulley. Each component plays a crucial role in the alternator’s operation, ensuring a steady supply of power to the electrical system.

Working Principle of a Dodge Journey Alternator

The working principle of the Dodge Journey alternator revolves around electromagnetic induction. When the engine is running, the crankshaft rotates, causing the alternator’s pulley to spin.

As the pulley turns, it drives the alternator rotor, which is surrounded by a stationary stator. The rotation of the rotor within the stator generates an alternating current (AC) through electromagnetic induction.

The AC produced by the alternator is then converted into direct current (DC) through the diode bridge. This rectification process ensures a consistent and stable supply of electrical power to the vehicle’s battery and electrical components.

The voltage regulator monitors and controls the output voltage of the alternator, keeping it within a specified range to prevent overcharging or undercharging of the battery.

The Role of the Alternator Belt

One crucial element in the functioning of the Dodge Journey alternator is the alternator belt. The alternator belt is responsible for transmitting power from the engine’s crankshaft to the alternator’s pulley.

It ensures that the pulley rotates smoothly, enabling the generation of electricity. Regular inspection and maintenance of the alternator belt are essential to prevent belt wear, cracking, or slipping, which can affect the performance of the alternator.

Signs of a Failing Alternator

Check out this A-Premium Alternator Compatible

Learn to identify the telltale signs of a failing alternator. From dimming headlights to strange noises, we will discuss the common symptoms that indicate your Dodge Journey’s alternator may be malfunctioning. Being aware of these signs can help you take prompt action and prevent further damage.

Dimming Headlights and Electrical Issues

One of the most noticeable signs of a failing alternator is dimming headlights. If you notice that your headlights are not as bright as they used to be, especially when you accelerate or turn on other electrical components, it could indicate a problem with the alternator.

See Also: Dodge Ram Catalytic Converter Scrap Price

Additionally, you may experience other electrical issues, such as flickering dashboard lights, malfunctioning power windows, or an erratic radio display.

Strange Noises and Smells

Another red flag to watch out for is strange noises coming from the alternator. A failing alternator may produce grinding, whining, or squealing sounds, indicating worn-out bearings or a damaged rotor. Additionally, if you detect a burning smell, it could be a sign of overheating due to a faulty alternator.

Battery Problems

The alternator is responsible for charging the vehicle’s battery while the engine is running. Therefore, a failing alternator can result in battery-related issues.

If you find yourself frequently jump-starting your Dodge Journey, experiencing a dead battery, or noticing a recurring low battery warning, it is likely that the alternator is not effectively charging the battery.

Common Alternator Problems: Causes and Solutions

In this section, we will explore the most common problems that can arise with the Dodge Journey alternator. From faulty voltage regulators to worn-out brushes, we will discuss the causes behind these issues and provide practical solutions to resolve them.

Faulty Voltage Regulator

A faulty voltage regulator is a common problem in alternators. The voltage regulator is responsible for maintaining a stable output voltage from the alternator.

If the voltage regulator malfunctions, it can lead to overcharging or undercharging of the battery, resulting in electrical issues. Replacing the voltage regulator is usually the solution to rectify this problem.

Worn-out Brushes

The brushes in the alternator play a crucial role in conducting current between the stationary and rotating parts.

Over time, these brushes can wear out, leading to poor electrical contact and reduced alternator performance. Replacing the worn-out brushes can help restore the functionality of the alternator.

Defective Diode Bridge

The diode bridge is responsible for converting the AC produced by the alternator into DC. If one or more diodes in the bridge fail, it can result in an inconsistent or pulsating output, causing electrical issues in the vehicle. Replacing the defective diode bridge is necessary to ensure proper rectification of the alternator’s output.

Loose or Damaged Wiring

Loose or damaged wiring connections can also lead to alternator problems. Poor electrical connections can cause voltage drops or interruptions, affecting the performance of the alternator.

See Also: 2007 Dodge Caliber Battery: Common Battery Issues

Checking and tightening any loose connections, as well as repairing or replacing damaged wiring, can help resolve this issue.

Maintaining Your Dodge Journey Alternator

Check out this Premier Protein Shake 30g Protein

Prevention is better than cure! Discover the essential maintenance practices to ensure the longevity and optimal performance of your Dodge Journey’s alternator. We will provide you with simple yet effective tips to keep your alternator in top shape.

Regular Inspection and Cleaning

Performing regular inspections of your Dodge Journey’s alternator is key to catching any potential problems early on.

Check for any signs of damage, loose connections, or wear. Additionally, keeping the alternator clean from dust and debris helps prevent overheating and ensures efficient operation.

Checking and Replacing the Alternator Belt

Inspecting the alternator belt regularly is crucial for its smooth operation. Look for signs of wear, cracking, or slipping.

If you notice any issues, it is important to replace the belt promptly. A worn-out or damaged belt can cause the alternator to function improperly, leading to electrical problems.

Maintaining Battery Health

A healthy battery is essential for the proper functioning of the alternator. Regularly check the battery’s condition, ensuring that it is charged and free from corrosion.

Keeping the battery in optimal condition reduces the strain on the alternator and helps maintain a stable electrical system.

Avoiding Excessive Electrical Load

Avoid overloading your Dodge Journey’s electrical system by minimizing the use of additional electrical accessories when the engine is not running.

Running numerous high-power devices simultaneously can put undue stress on the alternator, potentially leading to overheating or premature failure.

Upgrading Your Alternator: Is it Worth it?

Considering an upgrade for your Dodge Journey’s alternator? In this section, we will weigh the pros and cons of upgrading to a higher-output alternator. Learn about the potential benefits and the factors to consider before making a decision.

Increased Power Output

One of the major advantages of upgrading to a higher-output alternator is increased power output. This can be beneficial if you have added electrical accessories or modifications that demand more electricity.

A higher-output alternator ensures that your electrical system can handle the additional load without straining the alternator.

Improved Charging Capacity

A higher-output alternator provides improved charging capacity, allowing your battery to recharge more quickly and effectively.

This can be advantageous if you frequently rely on accessories that drain the battery, such as audio systems, lighting modifications, or camping equipment. With an upgraded alternator, you can maintain a stable electrical system even under heavy load.

Compatibility and Installation Considerations

Before upgrading your alternator, it is essential to consider compatibility and installation requirements. Ensure that the upgraded alternator is compatible with your Dodge Journey’s electrical system and physically fits within the available space.

See Also: P0441 Dodge Caravan: Diagnosis Of P0441

Additionally, professional installation may be required, especially if the upgrade involves modifications to the wiring or mounting brackets.

Cost and Return on Investment

Another factor to consider is the cost of upgrading to a higher-output alternator. While upgrading can provide benefits, it is important to evaluate whether the cost justifies the perceived advantages.

Calculate the potential return on investment by considering the long-term benefits and savings, such as reduced maintenance and improved electrical system performance.

Replacing Your Dodge Journey Alternator: A Step-by-Step Guide

If you’re facing thedaunting task of replacing your Dodge Journey’s alternator, fret not! We’ve got you covered. Follow our comprehensive step-by-step guide, complete with detailed instructions and tips, to successfully replace your alternator without any hassle.

Gather the Necessary Tools and Materials

Before you begin the alternator replacement process, gather all the tools and materials you’ll need. This may include a socket wrench set, pliers, a multimeter, a new alternator, and any additional components or hardware specific to your Dodge Journey’s alternator model.

Disconnect the Battery

Prior to starting any work on the electrical system, it is important to disconnect the negative terminal of the battery. This will prevent any accidental short circuits or electrical shocks while working on the alternator.

Locate and Remove the Old Alternator

The next step is to locate the old alternator in your Dodge Journey’s engine bay. Refer to your vehicle’s manual or seek assistance from online resources to help identify its specific location.

Once located, use the appropriate tools to remove the bolts securing the alternator in place. Carefully disconnect any electrical connections or wiring harnesses attached to the alternator.

Install the New Alternator

With the old alternator removed, it’s time to install the new one. Position the new alternator in place and reconnect any electrical connections or wiring harnesses. Make sure to align the bolt holes properly. Begin tightening the bolts, but do not fully tighten them just yet.

Check Belt Tension

Before fully tightening the alternator bolts, check the tension of the alternator belt. It should have enough tension to prevent slipping but should not be overly tight.

Refer to your vehicle’s manual for the specific belt tension requirements and adjust accordingly. Once satisfied with the tension, proceed to fully tighten the alternator bolts.

Reconnect the Battery

After installing the new alternator, it’s time to reconnect the battery. Reattach the negative terminal and ensure it is securely fastened. This will restore power to the vehicle’s electrical system.

Test the New Alternator

With the installation complete, it is crucial to test the new alternator to ensure proper functionality. Start the engine and use a multimeter to measure the voltage output of the alternator.

It should fall within the specified range for your Dodge Journey’s alternator model. Additionally, check for any signs of abnormal noise, overheating, or electrical issues.

OEM vs. Aftermarket Alternators: Which is Right for You?

Choosing the right alternator for your Dodge Journey can be confusing. In this section, we will compare OEM and aftermarket alternators, discussing their pros and cons. By the end, you’ll have a clear understanding of which option suits your needs and budget.

OEM Alternators

OEM (Original Equipment Manufacturer) alternators are produced by the same manufacturer that supplied the original alternator for your Dodge Journey. They are designed to meet the exact specifications and quality standards set by the vehicle manufacturer.

OEM alternators are generally more expensive but offer a higher level of assurance in terms of fit, performance, and durability.

Aftermarket Alternators

Aftermarket alternators are produced by third-party manufacturers and are designed to fit various vehicle models, including the Dodge Journey.

See Also: P0441 Dodge Charger: Impact Of P0441 Code

They are often more affordable than OEM alternators and may offer a wider range of options, such as higher output capacities or enhanced features.

However, the quality and reliability of aftermarket alternators can vary, and careful research is necessary to ensure you choose a reputable brand.

Factors to Consider

When deciding between OEM and aftermarket alternators, consider factors such as your budget, the level of assurance you require, and your specific needs.

If your Dodge Journey is still under warranty, choosing an OEM alternator may be the best option to maintain the warranty coverage.

However, if cost savings are a priority and you can find a reputable aftermarket alternator that meets your requirements, it can be a viable choice.

• Recent Posts

• P0066 Code: Air Assisted Injector Control Circuit or Circuit Low - April 30, 2024
• P0065 Code: Air Assisted Injector Control Range/Performance - April 29, 2024
• P0063 Code: HO2S Heater Control Circuit Low (Bank 2 Sensor 3) - April 29, 2024

Share this:

Leave a reply cancel reply.

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Affiliate disclosure
• Contact Form
• Privacy Policy
• Terms and Conditions

Dodge Journey Electrical Fuse Replacement Guide How to change a blown electrical fuse in a first generation 2009 to 2014 Dodge Journey SUV with pictures.

Copyright 2024 � PaulsTravelPictures.com  All Rights Reserved �

Privacy Policy      About Paul & Author Contact Info

Press enter to search.

• Browse Categories
• Dodge Journey Car and Truck
• Dodge Car and Truck

Cars & Trucks

Ask a question.

• Share on Facebook
• Share on Twitter
• Share on Google+
• Share on Pinterest
• Share by Email

Related Topics:

• Dodge Journey
• Dodge Cars & Trucks
• View All »

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

What is the alternator fuse number for a 2013 Dodge Journey SE 4 cylinder?

• Want Answer 1 Clicking this will make more experts see the question and we will remind you when it gets answered.
• Print this page
• Share this page

Do alternators have fuses as they generate electricity not use it and should always be connected when running if you have a battery non charging light this would indicate the alternator is defective or a cable is damaged or disconnected Do alternators have fuses as they generate electricity not use it and should always be connected when running if you have a battery non charging light this would indicate the alternator is defective or a cable is damaged or disconnected

• Video Images

An expert who has achieved level 3 by getting 1000 points

An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

An expert that got 20 achievements.

An expert that got 10 achievements.

• Dodge Master 29,494 Answers
• Posted on Mar 01, 2021

• Not Helpful
• Add a Comment

ADMIN Andrew

• Dodge Master 67,042 Answers

Fuse Box Diagram Dodge Journey (2011-2019) - Fuse-Box.info

5 related answers.

• 1985 Answers
• Posted on Dec 29, 2009

SOURCE: I need a manual for my Dodge Journey CRD SE 2009.

http://www.dodge.com/en/owners/manuals/index.html

Testimonial: " Thank you very much very very helpful. Niki "

• Posted on Jul 19, 2010

SOURCE: Check engine light says cylinder number 4 misfire

exactly, looking at the engine from front of car with hood open, it is the last cylinder on the right

Testimonial: " Thanks! It would be the one that is hardest to get to due to junk screwed right on top of it! "

adrian halligan

• 1075 Answers
• Posted on Aug 09, 2010

SOURCE: can i put a 4

the simple answer is yes,the next answer is no ,you will need engineer to rework the engine mounts.adrian,,,,,,,,,

• 1615 Answers
• Posted on Nov 19, 2013

SOURCE: 2013 dodge journey seatbelt wrapped around headrest and wont release

Remove the cover over where the belt goes into, use a screwdriver to unjam the "cogs" thus releasing the belt. Replace the cover. That should fixya

jack layton

• 5569 Answers
• Posted on Jan 02, 2015

SOURCE: 2009 dodge journey serpentine belt routing diagram

Add Your Answer

Tips for a great answer:

• - Answer the question.
• - If you need clarification, ask it in the comment box above.
• - Better answers use proper spelling and grammar.
• - Provide details, support with references or personal experience.

      Upload an image from your computer

Draw a box over the problem!!

Attachments: Added items

Uploading: 0 %

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Related Questions:

2010 dodge journey with 3.5 liter engine. how many and where are the locations for the camshaft position sensors on it, camshaft position sensor - engine & transmission.

2019 Dodge Journey 4 Speed 2.4L Transmission Range Sensor

Where is the temperature sensor on 2013 dodge journey, i have a 2013 dodge journey 4 cyl......my coolant tank shows about 1 inch low on coolant ....is it ok to add tap water to bring it up to max level posted by b. w. on dec 16, 2016, i have a 2013 dodge journey 4 cyl......my coolant tank shows about 1 inch low on coolant ....is it ok to add tap water to bring it up to max level posted by b. w. on dec 16, 2016, i have a 2013 dodge journey 4 cyl......my coolant tank shows about 1 inch low on coolant ....is it ok to add tap water to bring it up to max level, trying to figure out alternator fuse number on 2010 dodge journey sxt don't see the word alternator on fuse box have new battery and alternator but still goes click click when trying to start it.

Fuses diagram

What voltage should alternator put out for a dodge journey 2009 2.4l 4 cylinder, not finding what you are looking for.

View Most Popular

Related Question

2010 Dodge Journey

2,199 views

Usually answered in minutes!

Popular Questions

Dodge journey has heat on drivers side and cold on passenger and rear. clicking noise from dash on paasenger side.

2009 Dodge Journey

My 2009 dodge journey won't

My dogde journey esp bas light turns on, what does it mean.

2010 Dodge Journey 2.4

How do I check the transmission fluid on a 2009

How do you remove battery on 2010 dodge journey.

Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Dodge Experts

Level 3 Expert

17989 Answers

Thomas Perkins

15088 Answers

Arnie Burke

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

2011-dodge-journey-31045.pdf.....

2011 Dodge Journey

Journey2009.pdf. user-manual-2010...

Have a manual for Dodge Cars & Trucks?

Or just drag it here!

Step 2: Please assign your manual to a product:

Press ESC to close

Dodge Journey Alternator Replacement: Tips and Tricks

Welcome to Mechanics News! In this article, we will be discussing the topic of Dodge Journey alternator replacement and providing you with some helpful tips. The alternator is a crucial component of your vehicle’s electrical system, responsible for charging the battery and powering various electrical components. Ensuring the proper functioning of the alternator is essential to keep your Dodge Journey running smoothly and avoiding any unexpected breakdowns. Join us as we dive into the process of replacing the alternator and share some valuable insights to make the task easier. Stay tuned for expert advice and step-by-step instructions!

Signs that your Dodge Journey alternator needs replacement

Most important sentences: – The alternator is responsible for providing power to electrical components in your vehicle, so it’s crucial to be aware of any warning signs that it may be failing. – If you notice dimming headlights, a dead battery, or strange electrical issues, it’s likely time to replace your Dodge Journey alternator.

When your Dodge Journey’s alternator starts to fail, there are several signs that you may observe. Dimming headlights are a common symptom, as the alternator plays a key role in supplying power to the lighting system. Additionally, a dead battery can indicate a faulty alternator, as it is responsible for charging the battery while the engine is running. Strange electrical issues, such as flickering dashboard lights or sporadic power fluctuations, may also suggest a failing alternator. If you experience any of these signs, it’s best to have your alternator checked and replaced if necessary.

Steps to replace the alternator in a Dodge Journey

Most important sentences: – Replacing the alternator in a Dodge Journey requires basic mechanical knowledge, but if you follow these steps carefully, you should be able to do it yourself. – Remember to disconnect the battery before starting the process to avoid any potential electrical hazards.

Replacing the alternator in your Dodge Journey can be accomplished by following these steps:

1. Disconnect the negative terminal of the battery to ensure safety while working on electrical components. 2. Locate the alternator, which is typically positioned at the front of the engine compartment. 3. Remove the serpentine belt by using a wrench or ratchet to release tension from the belt tensioner. 4. Detach the electrical connections and mounting bolts that secure the alternator to the engine. 5. Install the new alternator by reversing the removal steps, ensuring all connections are secure and tight. 6. Finally, reconnect the battery’s negative terminal and start the engine to confirm the proper functioning of the new alternator.

While it’s possible for DIY enthusiasts to replace the alternator, it’s important to exercise caution and consult your vehicle’s manual or seek professional guidance if needed.

Tools required for Dodge Journey alternator replacement

Most important sentences: – Before attempting to replace the alternator in your Dodge Journey, make sure you have the necessary tools to complete the job efficiently. – Having the right tools will help you avoid any unnecessary frustration or damage during the replacement process.

To successfully replace the alternator in your Dodge Journey, you will need the following tools:

1. Socket set with various sizes 2. Wrench set 3. Belt tensioner tool 4. Screwdrivers (flathead and Phillips) 5. Torque wrench (for tightening bolts correctly) 6. Pliers (to disconnect electrical connectors) 7. Battery terminal puller (if necessary for easier disconnection)

Having these tools readily available will ensure a smooth and efficient alternator replacement process.

Should I choose OEM or aftermarket alternator for my Dodge Journey?

Most important sentences: – When choosing an alternator for your Dodge Journey, you’ll have the option between OEM (Original Equipment Manufacturer) or aftermarket alternatives. – Consider factors such as warranty, price, and reputation when making your decision.

Deciding whether to choose an OEM or aftermarket alternator for your Dodge Journey depends on several factors.

OEM alternators are made by the original manufacturer of your vehicle and are designed to match the specifications of the original part. They often come with a warranty, ensuring reliable performance. However, OEM alternators can be more expensive compared to aftermarket options.

Aftermarket alternators are produced by third-party manufacturers and can offer a more cost-effective solution. They may come with different warranties based on the brand and supplier. Additionally, aftermarket alternators can provide improved features or specifications compared to the original part.

Ultimately, the decision between OEM and aftermarket alternators should be based on factors like pricing, warranty coverage, reputation of the manufacturer, and your specific needs.

Tips to maintain the health of your Dodge Journey alternator

Most important sentences: – Regular maintenance practices can help prolong the lifespan of your Dodge Journey’s alternator and prevent unexpected failure. – By following these tips, you can ensure the smooth functioning of your alternator and reduce the likelihood of costly repairs .

To maintain the health of your Dodge Journey alternator, keep the following tips in mind:

1. Keep your battery terminals clean and free from corrosion. Dirty terminals can impede the flow of electricity, putting strain on the alternator. 2. Ensure the drive belt is properly tensioned. A loose or damaged belt can affect the charging efficiency of the alternator. 3. Avoid overloading your electrical system. Excessive use of power-hungry accessories can put unnecessary strain on the alternator. 4. Regularly check your alternator’s connections for any signs of wear or looseness. Tighten or replace as needed. 5. Schedule regular inspections and maintenance with a qualified mechanic to catch any potential issues before they escalate.

By following these maintenance tips, you can help extend the lifespan of your Dodge Journey’s alternator and ensure optimal performance.

Machine fanatics ask

How do i know if my dodge journey’s alternator needs to be replaced.

To determine if your Dodge Journey’s alternator needs to be replaced, you can perform a few diagnostic tests:

1. Check the battery voltage: Start by turning on the engine and using a voltmeter to measure the battery voltage. A fully charged battery should read around 12.6 volts. If the voltage is significantly lower, it may indicate a problem with the alternator.

2. Inspect the dashboard warning lights: If the alternator is failing, you may notice warning lights on your dashboard, such as the battery light or the check engine light. These lights indicate a potential issue with the charging system, which includes the alternator.

3. Listen for unusual sounds: A failing alternator can sometimes make strange noises, such as grinding, whining, or squealing. If you hear any unusual sounds coming from the front of the engine, it could be a sign that the alternator needs to be replaced.

4. Observe electrical issues: A faulty alternator can cause various electrical problems in your vehicle. Look out for dim headlights, flickering interior lights, or a weak or dead battery. These issues may point to a failing alternator.

5. Perform a charging system test: To get a more accurate diagnosis, you can bring your Dodge Journey to a reputable mechanic or auto repair shop. They will use specialized equipment to perform a comprehensive test on the charging system, including the alternator.

Remember, if you suspect that your alternator needs replacement, it is always advisable to consult a professional mechanic to accurately diagnose and fix the issue.

What are the steps to replace the alternator in a Dodge Journey?

Replacing an alternator in a Dodge Journey involves several steps:

1. Disconnect the negative battery cable to ensure safety. 2. Locate the alternator, usually located on the front of the engine. 3. Loosen the tensioner pulley to relieve tension from the serpentine belt. 4. Remove the belt from the alternator pulley and set it aside. 5. Disconnect the electrical connections from the alternator, including the main power wire. 6. Remove any mounting bolts or brackets that are securing the alternator in place. 7. Carefully remove the old alternator from the engine compartment. 8. Take the new alternator and position it in the same location where the old one was removed. 9. Reinstall any mounting bolts or brackets that were removed earlier to secure the new alternator. 10. Connect the electrical connections to the new alternator, making sure all connections are secure. 11. Reinstall the serpentine belt onto the alternator pulley, ensuring it is properly tensioned. 12. Tighten the tensioner pulley to secure the belt in place. 13. Reconnect the negative battery cable. 14. Start the engine and test the new alternator to ensure proper functionality.

Remember to consult the vehicle’s specific repair manual for detailed instructions and torque specifications.

Are there any specific tools or equipment needed for the alternator replacement in a Dodge Journey?

To replace the alternator in a Dodge Journey, you will need the following tools and equipment:

1. Socket set with various sizes 2. Ratchet and extension 3. Torque wrench 4. Flathead and Phillips screwdrivers 5. Pry bar or trim removal tool 6. Battery terminal wrench or pliers 7. Serpentine belt tool (if necessary) 8. Jack and jack stands (if necessary) 9. Safety glasses 10. Gloves

Before starting the alternator replacement, make sure to disconnect the negative battery terminal and remove any necessary components or parts that may be blocking access to the alternator.

Once you have the necessary tools and equipment ready, follow these general steps to replace the alternator:

1. Locate the alternator on the engine. It is typically located at the front of the engine, near the top. 2. Loosen the tension on the serpentine belt using the serpentine belt tool, if necessary. This will allow you to remove the belt from the alternator pulley. 3. Disconnect any electrical connectors attached to the alternator. This may include the main power cable and any other smaller connectors. 4. Remove any bolts or mounting brackets securing the alternator to the engine block or bracket. Use the appropriate socket and ratchet or wrench to remove these fasteners. 5. Gently pry or wiggle the alternator free from its mounting location. Be careful not to damage any surrounding components. 6. Install the new alternator by reversing the steps above. Make sure all connections are secure and tight. 7. Reinstall the serpentine belt and ensure it is properly aligned on all pulleys. 8. Reconnect the negative battery terminal. 9. Start the vehicle and check for proper alternator operation. Ensure that the battery is charging correctly and there are no warning lights on the dashboard.

It is important to consult the specific repair manual or instructions for your Dodge Journey model for detailed steps and any additional requirements.

Can I replace the alternator in my Dodge Journey myself, or should I take it to a professional mechanic?

It is possible to replace the alternator on a Dodge Journey yourself if you have the necessary skills and tools. However, it is recommended to take it to a professional mechanic for several reasons.

Experience: Professional mechanics have years of experience working on various vehicles and are familiar with the specific procedures involved in replacing an alternator on a Dodge Journey. They can quickly diagnose any potential issues and ensure the task is completed correctly.

Warranty: If your Dodge Journey is still under warranty, attempting to replace the alternator yourself may void the warranty. Taking it to a professional will ensure that the repair is done according to manufacturer specifications and will not affect your warranty coverage.

Tools and Equipment: Replacing an alternator typically requires specialized tools and equipment. A professional mechanic will have access to these tools and be able to perform the job efficiently and safely.

Time and Complexity: Replacing an alternator can be a complex task that requires knowledge of the vehicle’s electrical system and proper disassembly and reassembly procedures. It may take an inexperienced person much longer to complete the job compared to a professional who has performed similar repairs many times before.

Safety: Working on a vehicle’s electrical system can be dangerous if not done properly. A professional mechanic will be trained in safety protocols and take necessary precautions to prevent any accidents or injuries.

In conclusion, while it is technically possible to replace the alternator on your Dodge Journey yourself, it is generally recommended to take it to a professional mechanic for a hassle-free and efficient repair.

Are there any common issues or challenges that I should be aware of when replacing the alternator in a Dodge Journey?

When replacing the alternator in a Dodge Journey, there are a few common issues and challenges that you should be aware of:

1. Accessibility: The alternator in the Dodge Journey is typically located at the bottom front of the engine. Accessing it can be challenging due to limited space and various components blocking the way. Removing other parts such as the drive belt and air intake system may be necessary.

2. Electrical connections: Before removing the alternator, disconnect the battery to avoid any electrical shorts or damage. Make sure to label or take note of the specific wiring connections and their positions for easier reinstallation later.

3. Belt tension: The tension on the drive belt needs to be properly adjusted when installing the new alternator. Use a tension gauge or follow the manufacturer’s guidelines to ensure the correct tension, as both over-tightening and under-tightening can cause issues.

4. Mounting bolts: The alternator is secured to the engine using mounting bolts. These bolts may be difficult to access and remove due to corrosion or tight spaces. Using penetrating oil and appropriate tools can help loosen them.

5. Quality replacement: When purchasing a new alternator, it’s essential to choose a quality replacement that meets the specifications of your Dodge Journey. OEM (Original Equipment Manufacturer) or reputable aftermarket brands are recommended for reliability and compatibility.

6. Professional assistance: If you are not experienced in automotive repairs or lack the necessary tools, seeking professional assistance is advisable. Alternator replacement can be challenging, and incorrect installation can lead to further damage or vehicle malfunction.

Remember, these are general points to consider, and it’s always recommended to consult the specific service manual for your Dodge Journey or seek guidance from a professional mechanic for a successful alternator replacement.

In conclusion, replacing the alternator in your Dodge Journey can be a daunting task, but with the right tools and knowledge, it is definitely doable. By following these tips and steps provided, you can save yourself a significant amount of money by tackling the replacement on your own. Remember to always disconnect the battery before starting any work and take the necessary precautions to ensure your safety throughout the process.

Don’t forget to consult your vehicle’s manual for specific instructions tailored to your Dodge Journey model. Additionally, seeking assistance from online forums and communities dedicated to car repairs can provide further guidance and support.

Regular maintenance and timely replacement of vital components like the alternator will ensure your Dodge Journey continues to perform at its best. Understanding the signs of a failing alternator and knowing how to replace it will give you peace of mind on the road, knowing that your vehicle is operating efficiently.

So, roll up your sleeves and get ready to conquer this DIY project! Taking control of your car’s maintenance not only empowers you as an owner but also saves you time and money in the long run.

Remember, as with any repair, if you feel overwhelmed or unsure, it is always best to seek professional help. However, with the right tools and a little determination, you can successfully replace the alternator in your Dodge Journey, putting you back on the road with confidence and pride.

Happy wrenching!

Introducing the Mercedes-Benz C240 Air Conditioning Recharge: A Guide to Staying Cool and Comfortable in Your Luxury Ride. Are you Read more

Introducing our latest article on Mechanics News... In this edition, we bring you an essential guide to Dodge Durango wheel Read more

Welcome to Mechanics News! In this article, we will delve into the intricacies of the P1506 Ford code, a common Read more

In today's article on Mechanics News, we're tackling a common question: what happens if more current is drawn out of Read more

The Mercury Sable ABS brake system diagnosis: Welcome to Mechanics News, where we bring you the latest updates in the Read more

Introducing "Acura TL Navigation Code: Unlocking the Power of Your Acura's GPS System" Unlock the full potential of your Acura Read more

Introducing the Kia Wolf Grey Paint Code: Unleash your inner creativity with Kia's stunning Wolf Grey color option. Featuring a Read more

Introducing our latest article on Mechanics News, shedding light on the **Porsche 192** with its persistent problems and customer complaints. Read more

Categorized in:

About the Author

Mark Smith is a versatile individual with a unique combination of skills and expertise. As a journalist and mechanical engineer, he has made significant contributions to the field of automobiles and trucks. Mark's extensive knowledge in both journalism and engineering allows him to provide insightful and detailed analysis of various automotive topics. With a background in mechanical engineering, Mark possesses a deep understanding of the technical aspects of vehicles, including their design, functionality, and performance. His expertise in this area enables him to dissect complex engineering concepts and present them in a comprehensible manner to his audience. As a journalist, Mark excels at researching, investigating, and reporting on automotive news and developments. He has a keen eye for detail and a knack for storytelling, which enables him to deliver engaging and informative articles. Mark's writing style is characterized by his ability to present technical information in a way that is accessible to readers from different backgrounds, whether they are automotive enthusiasts or simply interested in staying updated with the latest industry trends.

Related Articles

Ultimate Guide: Transporting Water Heater in Pickup Truck

Bunk Heater and AC for Semi Truck: Ultimate Comfort Solution

How to Lease Your Truck to Your Company: A Step-by-Step Guide

Don Baskin Truck Sales in Covington Tennessee: Your Next Truck Awaits

Steering Assist is Reduced Drive With Care – Expert Guidelines

Understanding the ECM on a Truck: Everything You Need to Know

Chevy Bolt: Resolving Incorrect Shift Conditions

Can You Swap a 6.0 into a 5.3 Truck? Engine Upgrade Guide

Leave a reply cancel reply.

Save my name, email, and website in this browser for the next time I comment.

Post Comment

Auto Genius

Dodge durango (2013) – fuse box diagram.

Year of  production: 2013

Totally Integrated Power Module

The Totally Integrated Power Module is located in the engine compartment.

WARNING: Terminal and harness assignments for individual connectors will vary depending on vehicle equipment level, model, and market.

• 800.547.2049 Text or Call
• Aston Martin
• International
• Mercedes-benz
• Speed Queen
• Freightliner
• Mack Trucks
• Sterling Trucks
• Volvo Trucks
• Massey Ferguson
• New Holland
• Volvo Tractors
• Testimonials
• How This Works
• Get a Quote

Cannot find a standard repair for your item? Get a Custom Quote

Cannot find a standard repair for your item?

• Get A Quote

TIPM Repairs

We are now offering  TIPM module repairs for RAM, Dodge, Chrysler, Jeep, and VW . Our repair service provides a fast 1-Business day turnaround to get your 2002 through 2019 truck, minivan, or jeep back up and running again. A TIPM or Totally Integrated Power Module failure commonly appears as fuel or battery related issue, and common symptoms may include intermittent, erratic, or complete failure of:

• Power Door Locks
• Front/Rear Windshield Wipers
• Front/Rear Wiper Fluid Power
• Backup Lights

If you have a TIPM in need of a repair and do not see your specific make and model listed below, please call us at  800-547-2049  so we can help.

2006 - 2009 Dodge RAM TIPM Exchange

This Dodge RAM TIPM exchange service is for a failing or faulty Totally Integrated Power Module (TIPM) for 1500/2500/3500/4500/5500 models. This includes model years 2006, 2007, 2008 and 2009. This exchange excludes the 2009 Ram 1500, part...

2011 - 2012 Dodge RAM TIPM Exchange

This Dodge RAM TIPM exchange service is for a failing or faulty Totally Integrated Power Module (TIPM) on model years 2011 and 2012 for 1500/2500/3500 models. See a complete list of part numbers below. Common TIPM failure symptoms: Fuel...

2007 - 2018 Jeep TIPM Module Repair Service

This Jeep TIPM repair service is for a failing or faulty Totally Integrated Power Module (TIPM). Failure symptoms may include intermittent failure, complete failure, or a system component staying on all the time, such as the fuel pump running...

2002 - 2005 Dodge Ram IPM Repair Service

This Dodge RAM IPM repair service is for a 2002, 2003, 2004, or 2005 failing or faulty Integrated Power Module (IPM). This failure commonly appears as a lighting related issue. Common Issues Rear lights operate intermittently or not at all Trailer...

2008 - 2016 Chrysler TIPM Module Repair Service

This Chrysler TIPM repair service is for a failing or faulty Totally Integrated Power Module (TIPM) on a 2008 - 2016 Chrysler Town & Country.   Common failures symptoms may include intermittent failure, complete failure, or a system...

2008 - 2016 Dodge Grand Caravan TIPM Repair Service

This Dodge Grand Caravan TIPM repair service is for a failing or faulty 2008 through 2016 Totally Integrated Power Module (TIPM).  Common failures symptoms may include intermittent failure, complete failure, or a system component staying on...

2009 - 2013 VW Routan TIPM Module Repair Service

This VW Routan TIPM repair service is for a failing or faulty Totally Integrated Power Module (TIPM)  on a 2009 - 2013 VW Routan. Common failures appear in TIPMs as fuel or battery related issue. Failure symptoms may include intermittent...

2006 Dodge RAM TIPM Exchange

This 2006 Dodge RAM TIPM exchange service is for a failing or faulty Totally Integrated Power Module (TIPM) for 1500/2500/3500/4500/5500 models. Common TIPM failure symptoms: Right High Beam not working Left High Beam not working Right...

2011-2013 Jeep Grand Cherokee TIPM Repair Service

This Jeep Grand Cherokee TIPM repair service is for a 2011 through 2013 failing or faulty Totally Integrated Power Module (TIPM).  Common failure symptoms may include intermittent failure, complete failure, or a system component staying on all...

• Bahasa Indonesia
• Slovenščina
• Science & Tech
• Russian Kitchen

Le Corbusier’s triumphant return to Moscow

The exhibition of French prominent architect Le Corbusier, held in The Pushkin Museum, brings together the different facets of his talent. Source: ITAR-TASS / Stanislav Krasilnikov

The largest Le Corbusier exhibition in a quarter of a century celebrates the modernist architect’s life and his connection with the city.

Given his affinity with Moscow, it is perhaps surprising that the city had never hosted a major examination of Le Corbusier’s work until now. However, the Pushkin Museum and the Le Corbusier Fund have redressed that discrepancy with the comprehensive exhibition “Secrets of Creation: Between Art and Architecture,” which runs until November 18.

Presenting over 400 exhibits, the exhibition charts Le Corbusier’s development from the young man eagerly sketching buildings on a trip around Europe, to his later years as a prolific and influential architect.

The exhibition brings together the different facets of his talent, showing his publications, artwork and furniture design alongside photographs, models and blueprints of his buildings.

Russian art reveals a new brave world beyond the Black Square

Art-Moscow fair targets younger art collectors

In pictures: 20th century in photographs: 1918-1940

Irina Antonova, director of the Pushkin Museum, said, “It was important for us to also exhibit his art. People know Le Corbusier the architect, but what is less well know is that he was also an artist. Seeing his art and architecture together gives us an insight into his mind and his thought-processes.”

What becomes obvious to visitors of the exhibition is that Le Corbusier was a man driven by a single-minded vision of how form and lines should interact, a vision he was able to express across multiple genres.

The upper wings of the Pushkin Museum are separated by the central stairs and two long balconies. The organizers have exploited this space, allowing comparison of Le Corbusier’s different art forms. On one side there are large paintings in the Purist style he adapted from Cubism, while on the other wall there are panoramic photographs of his famous buildings.

Le Corbusier was a theorist, producing many pamphlets and manifestos which outlined his view that rigorous urban planning could make society more productive and raise the average standard of living.

It was his affinity with constructivism, and its accompanying vision of the way architecture could shape society, which drew him to visit the Soviet Union, where, as he saw it, there existed a “nation that is being organized in accordance with its new spirit.”

The exhibition’s curator Jean-Louis Cohen explains that Le Corbusier saw Moscow as “somewhere he could experiment.” Indeed, when the architect was commissioned to construct the famous Tsentrosoyuz Building, he responded by producing a plan for the entire city, based on his concept of geometric symmetry.

Falling foul of the political climate

He had misread the Soviet appetite for experimentation, and as Cohen relates in his book Le Corbusier, 1887-1965, drew stinging attacks from the likes of El Lissitsky, who called his design “a city on paper, extraneous to living nature, located in a desert through which not even a river must be allowed to pass (since a curve would contradict the style).”

Not to be deterred, Le Corbusier returned to Moscow in 1932 and entered the famous Palace of the Soviets competition, a skyscraper that was planned to be the tallest building in the world.

This time he fell foul of the changing political climate, as Stalin’s growing suspicion of the avant-garde led to the endorsement of neo-classical designs for the construction, which was ultimately never built due to the Second World War.

Situated opposite the proposed site for the Palace of the Soviets, the exhibition offers a tantalizing vision of what might have been, presenting scale models alongside Le Corbusier’s plans, and generating the feeling of an un-built masterpiece.

Despite Le Corbusier’s fluctuating fortunes in Soviet society, there was one architect who never wavered in his support . Constructivist luminary Alexander Vesnin declared that the Tsentrosoyuz building was the "the best building to arise in Moscow for over a century.”

The exhibition sheds light on their professional and personal relationship, showing sketches and letters they exchanged. In a radical break from the abstract nature of most of Le Corbusier’s art, this corner of the exhibition highlights the sometimes volatile architect’s softer side, as shown through nude sketches and classical still-life paintings he sent to Vesnin.

“He was a complex person” says Cohen. “It’s important to show his difficult elements; his connections with the USSR, with Mussolini. Now that relations between Russia and the West have improved, we can examine this. At the moment there is a new season in Le Corbusier interpretation.” To this end, the exhibition includes articles that have never previously been published in Russia, as well as Le Corbusier’s own literature.

Completing Le Corbusier’s triumphant return to Russia is a preview of a forthcoming statue, to be erected outside the Tsentrosoyuz building. Even if she couldn’t quite accept his vision of a planned city, Moscow is certainly welcoming him back.

All rights reserved by Rossiyskaya Gazeta.

to our newsletter!

Get the week's best stories straight to your inbox

This website uses cookies. Click here to find out more.

Moscow Location Map

Online Map of Moscow

Large detailed map of Moscow

Moscow tourist map

Moscow city center map

Moscow sightseeing map

Moscow metro map

Moscow excursions map

Moscow Kremlin tourist attractions map

Moscow Kremlin and Red Square tourist map

Arbat tourist map

Yakimanka tourist map

Moscow Boulevard Ring Map

About Moscow

Maps of Russia

• Russia Maps
• Map of Crimea

Cities of Russia

• Saint Petersburg
• North America Map
• South America Map
• Oceania Map

Popular Maps

• Australia Map
• Germany Map
• Singapore Map
• United Arab Emirates Map
• United Kingdom Map
• United States Map
• New York City Map
• Los Angeles Map

U.S. States

• California Map
• Colorado Map
• Florida Map
• Georgia Map
• Illinois Map
• New York Map
• North Carolina Map
• Virginia Map