honda civic cruise control light on

• Skip to main content
• Skip to primary sidebar
• Skip to footer

Additional menu

Honda The Other Side

Two Sides to Every Story

How Do You Use Cruise Control A Honda Civic?

By Richard Craver Updated on November 15, 2023

Your Honda Civic is equipped with a cruise control system that allows you to maintain a set speed automatically so that you do not have to worry about it. 

If you want, it can be set to maintain a constant distance from a vehicle in front of it, or to maintain a constant speed from the vehicle in front of it.

On highways or long stretches of road with no stop lights or intersections, you may want to use cruise control if you are driving on a highway.

The purpose of this article is to give you a basic understanding of how to use cruise control on a Honda car.

Table of Contents

Feature of Cruise Control

If you switch on the cruise control, you will be able to maintain a set speed above 25 mph (40 km/h) without having to keep your foot on the accelerator pedal.

Ideally, it should be used on straight, open highways for cruising. We recommend that you do not use it if you are driving in a city, on winding roads, on slippery roads, in heavy rain, or when the weather is bad.

Crashing can occur when cruise control is used improperly. On open highways in good weather, you should use your cruise control only.

How Do You Cruise Control A Honda Civic?

On the steering wheel , press the Cruise Control Master Button. There is a light on the instrument panel that indicates CRUISE MAIN.

The desired cruising speed should be above 25 miles per hour (40 kilometers per hour).

The steering wheel has a DECEL/SET button. Press it and release it.

The CRUISE CONTROL light on the instrument panel illuminates to indicate that the system has been activated.

You may not be able to maintain the set speed while going up and down hills with the cruise control. Use the brakes to slow down if your speed increases going down a hill.

The cruise control will be canceled. By pressing the RES/ACCEL button, you can resume your set speed. On the instrument panel, you will see the CRUISE CONTROL light come back on.

Changing The Set Speed

The following methods can be used to increase the set cruising speed:

Hold down the RES/ACCEL button. You can release the button once you reach cruising speed.

Press the accelerator pedal. Press the DECEL/SET button once you’ve reached your desired cruising speed.

The RES/ACCEL button can be tapped to increase speed in small increments. By doing so, you will increase your vehicle’s speed by about 1 mph (1.6 km/h).

If you want to decrease your set cruising speed, you can do the following:

Hold down the DECEL/SET button. Once the desired speed is reached, release the button.

Repeatedly tapping the DECEL/SET button will slow down your car in very small amounts. If you do this repeatedly, your vehicle will slow by about one mile per hour (1.6 km/h).

You can lightly tap the clutch or brake pedal with your foot. In the instrument panel, you will see a CRUISE CONTROL light going out.

The DECEL/SET button should be pressed when the car slows to the desired speed.

The accelerator pedal can still be used to speed up even with cruise control on. When you have completed the pass, let go of the accelerator pedal.

As soon as the vehicle reaches the set cruising speed, it will return to it. The cruise control will be disabled if your foot is resting on the brake or clutch pedal.

Canceling The System

The system can be canceled in three ways. The steering wheel has a cancel button and a main button. If you want to cancel everything, you can simply press the brake.

Pressing the distance button for at least one second can also set the vehicle to traditional cruise control.

The distance bars will disappear from the dashboard once this is done, and “cruise mode” will replace them. By pressing the distance button again for at least one second, the ACC can be re-activated.

How Do You Reset Adaptive Cruise Control?

Honda’s ACC system can be reset by pressing and holding the interval button (the four bars behind the interval button) for approximately one second, followed by Cruise Mode Selected appearing in the instrument panel.

Reset the Adaptive Cruise Control by pressing and holding the interval button once more.

How Do You Drive A Cruise Control On A Honda Civic 2019?

It is convenient to have adaptive cruise control (ACC) when traveling, especially on long road trips. The following instructions will show you how to use cruise control on a Honda Civic from 2019:

On the steering wheel, press the Main button. The multi-information display on your dashboard will display the adaptive cruise control (ACC).

Use the Set/- button on the steering wheel to set the speed when you reach the desired speed. The Reset/+ and Set/- buttons are used to adjust the speed. The speed can be increased by five mph by holding down either button.

On the steering wheel, press the distance button to set the interval distance between you and the car in front of you.

There are four distance bars on the icon of a vehicle. A short interval is the shortest, followed by a middle interval, long interval, and an extra-long interval.

Three options are available for canceling the ACC function: pressing the Cancel button on the steering wheel, pressing the Main button on the steering wheel, or depressing the brake pedal.

While you can set your vehicle’s speed to match the speed of the car in front of you, you are still responsible for maintaining awareness and exercising driver control.

What Is The Difference Between Cruise Control And ACC?

When it comes to cruise control, what’s the difference between traditional cruise control and Honda’s Adaptive Cruise Control (ACC)?

Taking cruise control to the next level and keeping roadways safer, this driver-assistive technology is part of Honda Sensing®.

It doesn’t matter whether you travel for work or enjoy family road trips, you will find driving easier and less tiring with ACC.

In addition to maintaining a constant speed, Honda’s Adaptive Cruise Control system also allows you to set the following intervals for vehicles in front of you.

How Does Honda’s ACC System Work?

To measure the distance between your vehicle and the vehicle in front, Honda’s ACC uses a radar unit mounted at the front of the vehicle and a camera mounted on the windshield.

In order to maintain your desired following interval between you and the vehicle ahead, the system will adjust the throttle position and even apply to brake.

Final Words

It’s important to know that your cruise control might not stay consistent when you go uphill or downhill.

Therefore, you should remain attentive at all times, since the set speed won’t adjust to your situation. You can automatically turn off the cruise control by pressing the gas pedal or braking pedal.

About Richard Craver

I worked as Honda service technician for a long time. I am currently enjoying a second career in industrial manufacturing. I spent a few years in aviation manufacturing after 34 years in the Acura and Honda repair field. I am using the same skill sets that I honed over the years in the automotive industry in an industry that not only expects, but demands quality workmanship and attention to detail. LinkedIn

Reader Interactions

Leave a reply cancel reply.

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

Subscribe Newsletter

Get Latest News on Honda Tech and Flagship

Thank you for signing up! 

December 3, 2023

How to Use Honda Cruise Control: A Step-by-Step Guide

Are you a proud owner of a Honda vehicle? If so, you may have noticed the cruise control feature in your car. Cruise control is a convenient feature that allows you to maintain a constant speed while driving. Whether you’re going on a long road trip or simply want to relax during your daily commute, Honda cruise control can make your driving experience more enjoyable and stress-free.

In this article, we will provide you with a comprehensive guide on how to use Honda cruise control. We’ll walk you through the steps, explain the different functions, and address common questions and concerns. So, let’s get started and learn how to make the most of this fantastic feature in your Honda vehicle.

Step 1: Activate Cruise Control

The first step in using Honda cruise control is to activate the feature. To do this, follow these simple steps:

Here’s a YouTube video that demonstrates the process of activating cruise control in a Honda Civic:

To activate cruise control, locate the cruise control buttons on your Honda’s steering wheel. These buttons are typically marked with symbols such as ‘SET,’ ‘RES,’ and ‘CANCEL.’ Press the ‘ON/OFF’ button to turn on the cruise control system.

Once the cruise control system is activated, you will notice a confirmation light on your dashboard. This light indicates that cruise control is ready to be set at your desired speed.

Step 2: Set Your Desired Speed

Now that you have activated cruise control, it’s time to set your desired speed. Follow these steps:

To set the speed, accelerate your Honda to your desired cruising speed. Once you have reached the desired speed, press the ‘SET’ button on the steering wheel. This action will engage cruise control and maintain your current speed.

It’s essential to note that cruise control does not automatically adjust your speed according to traffic conditions. You are responsible for maintaining a safe distance from other vehicles on the road and adjusting your speed manually when necessary.

Step 3: Adjusting Cruise Control Settings

Now that you have set your desired speed, you can make adjustments to your Honda cruise control settings. Here’s how:

If you wish to increase your cruising speed, press the ‘RES’ (resume) button. This action will cause your Honda to accelerate gradually until it reaches the previously set speed.

Conversely, if you want to reduce your cruising speed, press the ‘SET’ button. Your Honda will decelerate to a lower speed. Alternatively, you can tap the brake pedal lightly to disengage cruise control temporarily.

You can also cancel cruise control altogether by pressing the ‘CANCEL’ button. This action will deactivate the system, and your Honda will return to manual driving mode.

Step 4: Exiting Cruise Control

When you no longer need to use cruise control, it’s essential to exit the system correctly. Here’s how to do it:

To exit cruise control, simply tap the brake pedal or press the ‘CANCEL’ button on the steering wheel. Either action will disengage cruise control, and your Honda will return to manual driving mode.

It’s crucial to note that cruise control should not be used in hazardous driving conditions, such as heavy traffic, slippery roads, or inclement weather. Always prioritize safety and use cruise control responsibly.

Frequently Asked Questions

1. can i use cruise control in my honda accord.

Yes, cruise control is available in most Honda Accord models. To activate and use cruise control in your Honda Accord, follow the steps mentioned earlier in this article.

2. Can I adjust my cruising speed while using Honda cruise control?

Yes, you can adjust your cruising speed while using Honda cruise control. To increase your speed, press the ‘RES’ button, and to decrease your speed, press the ‘SET’ button or tap the brake pedal lightly.

3. Can I cancel cruise control in my Honda vehicle?

Yes, you can cancel cruise control in your Honda vehicle. Press the ‘CANCEL’ button on the steering wheel, and cruise control will be deactivated.

4. Is it safe to use cruise control in all driving conditions?

No, it is not safe to use cruise control in all driving conditions. Cruise control should not be used in hazardous conditions such as heavy traffic, slippery roads, or inclement weather. Always exercise caution and use cruise control responsibly.

5. Can I use cruise control in my Honda Civic Type R?

Yes, cruise control is available in the Honda Civic Type R. You can activate and use cruise control in your Honda Civic Type R by following the steps mentioned earlier in this article.

Now that you know how to use Honda cruise control, you can enjoy a more comfortable and convenient driving experience. Remember to always prioritize safety and use cruise control responsibly. Happy cruising!

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

Home » Honda » Causes Of Honda Adaptive Cruise Control Problem And How To Fix It

Causes Of Honda Adaptive Cruise Control Problem And How To Fix It

A Honda Adaptive cruise control problem can be a frustrating concern to deal with.

After all, you rely on this component for those long and tedious road trips. So, it is best to understand why this happens and what you can do to address it.

Since you rely on your cruise control for a more seamless and convenient experience while driving, you need to get this problem fixed sooner than later. Find out why your cruise control has stopped working and get the problem resolved for a stress-free ride.

What Causes A Honda Adaptive Cruise Control Problem

Generally, this issue is linked with your cruise control system. But there are also other common causes that you need to be aware of. 

Here are the more common culprits behind this issue and what you can do about it.

1. Blown fuse

Fuses control all electrical components in your vehicle. Hence, if you have a blown fuse that is connected to the cruise control system, then it can most definitely fail. And if the fuse is already damaged, your cruise control system will not function at all.

The good news is that you should be able to buy and replace your blown fuse. Check the manual to learn more about the fuse connected to your cruise control system and purchase a compatible component for a replacement.

2. Faulty brake pedal switch

Another possible cause of a cruise control problem is an issue with your brake pedal. This component turns your brake lights off and on, depending on the position of your pedal. When you press on the brake pedal, this disengages the cruise control system. 

Hence, if there are issues with your brake pedal switch, this causes the cruise control system to turn off. It may also cause the brake light to get stuck in the on position, which can confuse the drivers behind you. 

3. Speed sensor problems

Your speed sensors are on every differential or wheel. These monitor your speed to determine if there is a need for traction control. Your cruise control system has the speed sensors as one of its key components. So, when there is an issue with the sensor, this may cause the cruise control to malfunction, in addition to your speedometer acting up.

You can easily tell if there is a problem with your speed sensor by checking the dashboard. When you see the check engine light or the ABS warning light turn on, it means that your speed sensor is faulty.

4. Electrical Problems

Your cruise control is electronic. There are various parts that allow the system to function. So, if there is a problem with your cruise control, you should inspect the wiring harness, as well as related connectors, that may be having issues.

The voltage source also needs to be providing ample power to your cruise control system. Small faults can contribute to defects, so you may need to check on this. Sometimes a malfunction to the clock spring, a component behind your steering wheel, can also cause the cruise control to act strange.

Use your OBD II scanner to determine any error codes linked with your cruise control that may be responsible for these issues.

5. Damaged cable or hoses

And lastly, a cruise control problem may be linked with damages to the vacuum actuator or even the cable connecting to your throttle. This is the case with older vehicles. Damages to these parts will cause the cruise control to stop working completely. 

Further Information On The Honda Adaptive Cruise Control Problem

The cruise control initially appeared in vehicles back in the 1950s. Now, it is a staple component in modern vehicles. It is designed for maintaining a consistent speed when driving, which is useful especially in long distances.

With a cruise control, you can set your preferred speed and not have to step on your gas pedal. So, this reduces fatigue when you are driving for such a long distance. It also helps with fuel economy since you are able to maintain a steady flow of fuel.

If your cruise control system is having issues, then you need to determine what causes the failure. The repair cost depends on the affected parts and the extent of damage to the system. 

In the case of a broken brake switch or cruise control, the price can vary from $125 to as much as $350 . This includes the cost of replacement parts and labor. But if you only need to have the fuse changed, it should only cost you a few dollars. You may even replace the fuse yourself very quickly.

But if you have bigger problems with the cruise control such as a faulty actuator, the repair cost can be a bit steeper. For instance, replacing your actuator can set you back up to $700 or sometimes even more . 

While it may not appear to be an urgent fix when you have a cruise control problem, you most definitely want to get it addressed sooner than later. Otherwise, some other relevant issues affecting the performance may occur such as speedometer or acceleration problems.

Read More: Does Honda Hack Void Warranty? What You Never Knew!

Final Thoughts

Your cruise control includes a fuse, which may sometimes break and cause the system to fail. In the same way, there is a brake switch that also impacts the performance of your cruise control system. This sends signal to the system, which activates it when you apply the brakes. Thus, it is aware of when accelerating should cease. 

When your check engine light is turned on, this disables the cruise control system’s function. This is designed for safety purposes. So it is best to get your Honda Adaptive cruise control problem fixed sooner than later. By doing so, you can prevent performance issues and make sure no further damages occur over time.

• Pinterest 6

2 thoughts on “Causes Of Honda Adaptive Cruise Control Problem And How To Fix It”

What if along with the adaptive cruise control failing, the road mitigation departure as well as brake system light also turns on?

If the adaptive cruise control (ACC) fails and you also notice the road mitigation departure and brake system lights turning on, it could indicate a more significant issue with your vehicle’s safety systems. In this case, it is recommended to take the following steps:

1. Check the Owner’s Manual: Refer to your vehicle’s owner’s manual to understand the specific meaning of these warning lights. It may provide you with specific instructions or information about the problem.

2. Inspection: Take your vehicle to an authorized Honda service center or a qualified mechanic for a comprehensive inspection. They will be able to diagnose the issue using specialized diagnostic equipment and software.

3. System Reset: Sometimes, a temporary glitch or error in the system can cause multiple warning lights to illuminate. Try performing a system reset by disconnecting the vehicle’s battery for a few minutes and then reconnecting it. This may clear the fault codes and reset the systems. However, keep in mind that this is a temporary solution, and the underlying issue needs to be addressed.

4. Addressing Faulty Components: Depending on the diagnosis, the faulty components related to the ACC, road mitigation departure, and brake system will need to be repaired or replaced. This could involve issues with sensors, wiring, actuators, or control modules. Only a qualified technician can accurately identify and resolve these problems.

It is crucial to address these issues promptly, as they directly affect the safety and functionality of your vehicle’s advanced driver assistance systems. Following the manufacturer’s recommendations and seeking professional assistance is the best course of action in such situations.

Leave a Comment Cancel reply

Save my name, email, and website in this browser for the next time I comment.

• Forum Listing
• Marketplace
• Advanced Search
• Mechanical Problems

Cruise Control Not Staying On *FIXED*

• Add to quote

I have a 2001 EX and when I hit set on the steering wheel, it says Cruise Control on the dash, and then the light goes off one second later without engaging it. At first the dash light wasn't coming on at all. After looking at the pedal switch, I noticed it was missing the rubber stopper to activate the switch. So I unscrewed the switch, drove up to speed, pressed the switch, and got the dash light. Then it turns right off. I followed the instructions on this thread http://www.7thgenhonda.com/forum/showthread.php?t=18306 Because the car originally had a auto. I didn't get the dash light on after setting cruise so I wired it back and get cruise light on and off again. Also, I can't try to set cruise again unless I turn off the main switch and turn it back on. And those bulbs are out too. I am leaning towards cruise control module under the dash. Any opinions?  

When mine went bad I didn't have much time so I paid the dealer to fix it. From your explanation it sounds similar to what happened to me. The Diaphragm in the box under the hood was bad. It works off vacuum to move the throttle cable. I'm not sure how to check or test this but its worth investigating. Since you swapped transmissions good luck, its always more fun modified.  

The thing I don't get is that the coupe doesn't have the box under the dash and the sedan does. I have a box under my dash PN 36700-S5A-A21 (try typing that on iPad) and I have a coupe. The actuator under the hood is the correct one for the coupe with the 12 pin plug. The sedans use a different 4 pin plug. And the box under the dash has the plug going into it.  

I just drove with the crusie module under the dash unplugged and could not get the light on the speedometer to come on. Plugged it back in and it would come on and then off like before. I have a coupe so this module is not supposed to be there. I know the car was a D17A2 Auto coupe from the factory. Now it has a D17A1 5-Speed, still coupe. If they swapped harness, wouldn't the actuator under the hood also have the 4 pin plug or did the coupes have the plug under the dash dangling and not used? Maybe I need a new underhood harness with the 4 pin plug actuator?  

Replaced module under dash and still not working. I got the actuator under the hood coming in tomorrow. Hope that does it.  

Replaced the actuator today and still same problem. Anyone have suggestions?  

Today I installed another actuator. This time, it was for a 4 door model. I had to run wire from the module under the dash to the engine bay, since the wiring in the engine bay is for the 2 door. Test drove, PROBLEM SOLVED. I wish I would of thought of this earlier. Dash harness is for a 4 door, and its looking to actuate the cruise box for the 4 door. That is the reason why the Cruise Control light on the dash would go off immediately. This car has been such a pain. I'm just glad I got this fixed before my summer cross country vacation begins this weekend.  

• ?            
• 861.4K posts
• 14.9K members

Top Contributors this Month

• Search forums

• Honda Civic Gen Tech and Builds / Show Offs
• 7th Generation Honda Civic (2001-2005)

Cruise Control not working

• Thread starter audavis
• Start date May 16, 2020

Hello all, I have a 2004 Honda Civic EX Sedan that the cruise control has not worked ever since I owned it. I have done almost all the diagnosing I could do. What happens: When I press the cruise switch, the green light comes on just as it should (right?). When I get up to speed (above 25mph) I press the set button, and the green dash cruise light comes on, but it does not hold the speed. If I press cancel or the brake the dash light turns off just as it should. The only thing that is not happening is holding the vehicle speed. I can press the gas and accelerate while the cruise light is on, but as soon as I let off the gas the car decelerates. I have checked every single fuse in the car, they are all good. The horn works. I have even gotten a wiring diagram for the cruise control system and checked continuity in all the wires. Every single wire I've tested came out fine. Wiring between module and actuator is fine, between VSS, Brake Pedal, switches, fuse box, all fine. The only wiring that was not tested was between the CC Module and ECU. Everything else in this car works to my knowledge except the auto lock and unlock function when put in and out of park. I have gone through the programming, and the car responded properly saying the auto lock and unlock was set, but still did nothing. I should also mention I have replaced both the CC Module and actuator, still nothing. I have the CEL on due to the downstream O2 not being present, and SRS light is on for many reasons. However I took my car into the dealership recently for an airbag recall and they told me the SRS light would have nothing to do with CC not working. I am at a complete lost with this and would like my cruise back as I have a lead foot. Any help is greatly appreciated, I am willing to try anything at this point. If more information is needed please ask away!  

How To Use Cruise Control In A Honda Civic?

Cruise control is a great way to rest your feet during long drives on the highway. 

With the standard cruise function available in most vehicles, all you do is hit the speed you want, set the system, and the car maintains your speed until you brake.

In 2016, Honda leveled up its cruise control feature and introduced Adaptive Cruise Control (ACC) in the Honda Civic.

ACC not only maintains your speed but also auto-detects the vehicle in front of you and slows you down if you get too close.

To use cruise control in your Honda Civic, press MAIN on the steering wheel – Adaptive Cruise Control (ACC) will pop up on the instrument panel. Accelerate to your desired speed (it must be a minimum of 25 mph/40 km/h) and press the DECEL/SET button.

Press the RES/ACCEL button to increase the speed and the DECEL/SET button to decrease it.

These buttons increase or reduce speeds by 1 mph (1.6 km/h).

To set the distance between you and the vehicle ahead, press the DISTANCE button on your steering wheel (it has a car with four distance bars engraved on it).

You can set the distance to short, middle, long, or extra-long.

To cancel the cruise function, press the CANCEL button on the steering wheel, the MAIN button, or the brake.

How To Turn On Cruise Control ?

To turn on cruise control on your Honda Civic, press the MAIN button on the steering wheel.

ACC will pop up on the instrument panel.

LKAS (Lane Keeping Assist) will also appear.

While the cruise speed can’t be below 25 mph (40 km/h), you can initiate the cruise function while driving at slower speeds.

Press SET/- to set your speed.

The system will automatically set it to 25 mph (40 km/h), but you can press the button again until you reach your preferred speed.

The instrument panel will show your speed alongside a car icon with up to four bars behind it, indicating the distance between you and the cars ahead.

Cruise control is great at maintaining your speed on level ground, but it can struggle when driving up or down a hill.

If your speed increases downhill, press the brakes to cancel the feature.

Once on flatter ground, press the RES/ACCEL button to resume the previous cruise speed.

How To Change the Set Speed ?

You can increase the set speed in three ways:

• Press and hold the RES/ACCEL button and release it once you’re at your preferred speed.
• Press the gas pedal, accelerate to your desired speed, and press the DECEL/SET button.
• To gradually increase the speed, tap the RES/ACCEL button. Every tap will increase the speed by 1 mph (1.6 km/h).

You can decrease the set speed by:

• Pressing and holding the DECEL/SET and releasing it once you’ve reached your preferred speed.
• Lightly pressing the brake or clutch to switch off the cruise control. Once the car slows to your new speed, press the DECEL/SET button.
• Tapping the DECEL/SET button. Every tap will gradually reduce your speed by 1 mph (1.6 km/h).

You can still use the gas pedal to accelerate while cruise control is activated.

For example, if you need to overtake another vehicle. 

After you complete the pass, release the pedal, and your Civic will resume the previously set cruising speed.

How To Cancel Cruise Control ?

You can cancel cruise control in three ways:

• Press the brake or clutch pedal.
• Press CANCEL on the steering wheel
• Press the MAIN button.

The system will remember your set speed if you cancel by pressing the pedals or CANCEL button.

To return to this cruising speed, accelerate to at least 25 mph (40 km/h) and press the RES/ACCEL button.

If you switch off cruise control using the MAIN button, the system clears the set speed.

To use it again, you’ll have to set it up from the beginning.

• What’s the Difference Between Standard Cruise Control and ACC?

Standard cruise control and ACC both maintain your speed.

The difference is that Adaptive Cruise Control (ACC) also calculates the distance between you and the car ahead and slows you down if you get too close.

The feature also returns you to the set speed if the car switches lanes or accelerates beyond your current speed.

The Honda Civic uses a radar unit at the front of the car and a camera mounted on the windshield to feed spatial information to its ACC system.

To use ACC in your Civic, turn on the system, then set your speed and following distance.

The feature will take over from there.

• My Cruise Control Isn’t Working. What Should I Do?

If the cruise control isn’t working in your Honda Civic, you can try to troubleshoot the problem yourself.

The first step is double-checking that you haven’t blown a fuse.

The process is easy, inexpensive, and takes no more than half an hour.

Confirm the cruise control isn’t working by activating it using the MAIN button on the steering wheel.

You likely have blown a fuse if you see a green light on your dashboard, but the instrument panel has no activity.

Check the fuse box in the under-dash below the instrument panel.

Refer to the fuse chart in your owner’s manual to know which fuse is responsible for the cruise control setting.

Once you locate it, use a fuse puller or a pair of needle nose pliers to remove it.

Inspect the center strip. If damaged, replace the fuse.

If you’ve replaced the fuse but are still experiencing problems, the issue is likely the wiring. 

To avoid damaging your wiring, take your Civic to the shop.

• Precautions For Using Cruise Control

The first thing to mention is that cruise control doesn’t take over your vehicle’s operations – it only controls the speed and, with ACC, the following distance between you and the car in front of you. 

You are still in control of the steering; therefore, you’re in charge of which way the vehicle goes. 

Don’t use cruise control for speeds above 75 mph (120 km/h), and avoid using it if you’re tired, stressed, or generally unfocused. 

These emotional states affect concentration and reaction times, and cruise control can make it easier to slide into ‘auto-pilot,’ increasing your chances of an accident.  

When cruise control is activated, set both feet flat on the floor to ensure you can immediately retake control of your vehicle when necessary.

This position allows you to adjust your speed suddenly, accommodate road conditions, or make an emergency stop.

The final note is more of a reminder.

Always remember that you, the driver, are responsible for what occurs on the road – you won’t be able to blame technology should an accident happen when you weren’t being careful.

Cruise control offers a convenient way to rest your legs without stopping your vehicle.

Maintaining your speed also improves fuel economy and helps you stay within speed limits when driving on freeways or highways.

However, you must use the feature in the right driving conditions.

Activating cruise control in bad weather, heavy traffic, or on rough roads can increase your chances of an accident. 

To activate the cruise function in your Honda Civic, press MAIN on the steering wheel, accelerate to a minimum of 25 mph (40 km/h) and press the DECEL/SET button.

Press the RES/ACCEL button to increase your speed and the DECEL/SET button to decrease it.

If your Civic has ACC, press the DISTANCE button on your steering wheel to set your following distance behind the vehicle ahead of you.

If your cruise control system malfunctions, check the fuse before taking your car to the mechanic.

Table of Contents

• How To Turn On Cruise Control?
• How To Change the Set Speed?
• How To Cancel Cruise Control?

I'm a car mechanic with 23 years of hands-on experience in the automotive world.

I created this blog to share my passion and extensive knowledge with fellow car enthusiasts and DIYers.

Throughout my career, I've gained expertise in automotive repair, maintenance, and troubleshooting, which I now happily pass on to my readers.

My commitment to excellence and continuous learning has made me a trusted authority in the industry.

I'll provide you with practical tips, reliable advice to help you tackle your car-related challenges with confidence.

Similar Posts

How to Make a Honda Shadow 750 Faster?

Do You Have To Use Honda Power Steering Fluid With Honda Vehicles?

Is Honda Rebel 500 Good for Long Distance?

How to Know if Your Honda Is LX or EX?

Is a Honda Rebel 300 Too Small for You?

How To Know If Your Honda Has VTEC?

5 Reasons Why Your Cruise Control Stopped Working

• Updated: March 15, 2023

It would be difficult to find a vehicle on the road today without cruise control. This invaluable feature makes driving long distances easier but can also cause trouble when it malfunctions. Understanding the reasons your cruise control stopped working ensures that you can get the problem fixed quickly for a more enjoyable ride. 

While this fault can cause issues with the cruise control system itself, there could also be an effect on the acceleration of your vehicle. That’s why you want to have it looked at as soon as you notice a problem. Let’s take a quick look at the reasons your cruise control may have stopped working.

Reasons Why Your Cruise Control Stopped Working

The most common reason a cruise control stops working is due to a blown fuse or a defective brake pedal switch . It can also be caused by issues with the throttle control system or the ABS. In older cruise control systems, it can be caused by a broken vacuum line.

Here is a more detailed list of the possible reasons your cruise control is not working:

1. Blown Fuse

All electrical systems in the vehicle are controlled by fuses. Your cruise control system is attached to a fuse that can blow if there is a short circuit or fault. Without a good fuse, the cruise control system can’t work at all.

Thankfully, it’s not difficult to find and replace a blown fuse. Look in the owner’s manual to find the fuse that corresponds with the cruise control technology. 

2. Defective Brake Pedal Switch

The brake pedal switch is responsible for turning the brake lights on and off based on the pedal position. Cruise control systems are designed to disengage whenever your brake pedal gets pressed. 

Because the cruise control is wired into the brake pedal switch, any fault can cause it to stop working. When the brake pedal switch malfunctions, the car believes the brakes are engaged, causing the system to turn off automatically. Not only that, but your car’s brake light might also be stuck on, leaving confused drivers in your wake. 

3. Malfunctioning Speed Sensor

Speed sensors are located on every wheel or differential. The purpose of these sensors is to monitor the speed of the wheels to determine if traction control is needed. 

The speed sensors are also part of the cruise control system. When a sensor fails, the cruise control can stop working and the speedometer might act strange as well. 

If there is an issue with a speed sensor, it will often show with an ABS warning light or a check engine light on the dashboard.

RELATED: 3 Symptoms of a Bad ABS Wheel Speed Sensor

4. Electrical Issues

The cruise control system is electronic, with many components working together to make the system operate. If the cruise control fails to work, you want to check the wiring harness and associated connectors for a fault.

You also need to ensure that the voltage source is supplying enough power to the system. Even the smallest fault can cause defects with the cruise control. In many cases, there can be an issue with the cruise control lever or buttons causing the cruise control to not engage.

If your cruise control buttons are located on the steering wheel it could also be caused by a bad clock spring, which is located behind the steering wheel.

Check the system with an OBD2 scanner to look for any trouble codes related to the cruise control.

RELATED: 5 Symptoms of a Broken Clock Spring, Location & Replacement Cost

5. Damaged Vacuum Actuator, Hoses or Cable (Older cruise control)

If you drive an older vehicle with cruise control, you might have an issue with the vacuum actuator or the cable that connects to the throttle. If there has been damage done to the vacuum hoses or the actuator, the cruise control will stop working altogether.

Additionally, the cable linking the actuator to the throttle must be in good shape. If it has been broken, the cruise control will fail. 

What is Cruise Control?

Cruise control is a feature that is used when you are traveling at a consistent speed. Cruise control was first introduced for automobiles in the 1950s. However, it took many years before it became a staple in the modern vehicle.

This electrical system allows you to set a predetermined speed and take your foot off of the gas pedal. If you are on a long drive, there is less fatigue because you don’t have to try to maintain your speed. Cruise control can also benefit fuel economy because the vehicle uses less fuel when traveling steadily. 

In newer cars, you might be able to find adaptive cruise control , which is a smart technology. Adaptive cruise control allows you to travel at a predetermined speed, but it also helps to maintain a safe distance from the vehicles in front of you with the help of sensors. With conventional cruise control, you need to take over when the car in front of you slows down, but that’s not the case with adaptive cruise control. 

There are also vehicles nowadays with not only cruise control, but fully self-driving vehicles . We will most likely see much more of this in the future.

Cruise Control Repair Cost

The cost to repair your cruise control system depends on what caused it to fail. If you need to replace a cruise control or brake switch, you might spend between $125 and $350, including parts and labor. However, the cost to change a fuse is only a few dollars and you can perform the replacement yourself in just a matter of seconds. 

On the other hand, when something major fails, such as the actuator, you could be looking at a much higher repair bill. In some vehicles, the cost to replace a cruise control actuator can cost more than $700. These costs rise if you drive a luxury vehicle or one that is difficult to get parts for. 

It might not seem immediately important for you to fix the broken cruise control, but this defective system can affect other performance aspects. You could start to notice issues with acceleration or have trouble with the speedometer. To play it safe, it’s always best to have the cruise control repaired as soon as you notice a problem.

Is there a fuse for the cruise control?

Yes. If the cruise control is installed from the factory, you should check your car’s owner’s manual for the fuse location. If it’s an aftermarket cruise control, you’ll need to follow the wires to find the fuse.

Does the brake switch affect the cruise control system?

Yes. The brake switch affects the cruise control system. The brake switch sends a signal to the cruise control system to let it know when the brakes are being applied for the engine to know when it should stop accelerating.

Will the cruise control work if the check engine light is on?

The cruise control function will be disabled when the check engine light is on in most car models, even if the cause of the check engine light is not the cruise control itself. This is mainly due to safety reasons.

Can a vacuum leak affect cruise control?

Older vehicles use vacuum to control the throttle for the cruise control, and in this case a vacuum leak can heavily affect the cruise control. However, modern cruise controls are fully electric and in most cases will not be affected by a vacuum leak if the check engine light is not illuminated.

Although many people may think that the cruise control system is unimportant and not worth spending money to repair, the problem can be caused by a faulty part that will affect the engine’s performance or durability. Therefore, it is best not to ignore the problem if your cruise control is not working without first diagnosing the car properly.

If your cruise control still isn’t working after trying all the tips in this article, it’s probably time to take it in for a professional opinion from a mechanic. It may be a more serious problem that requires replacement parts or repairs. In the meantime, drive safe and enjoy the open road!

Learn more:

• Brake Lights Not Working But Tail Lights Are? (How to Fix)
• Tail Lights Not Working But Brake Lights Are? (How to Fix)
• Brake Lights Stay On? (5 Causes & How to Fix it)

Categories: Electric , Troubleshooting

Related Posts

Latest Posts

• The Best & Worst Years Of Ford Explorer
• Best & Worst Years Of Toyota Corolla
• Best & Worst Years of Toyota RAV4
• When Should Your Child Switch To A Forward-Facing Car Seat?
• The Best & Worst Years Of Toyota Camry
• I Accidentally Put Premium Gas In My Car, What To Do?

• Forum Listing
• Marketplace
• Advanced Search
• Honda - Vehicles
• Civic Forum
• D-Series Tech

Cruise Control Light Stuck On? & Doesn't Work...

• Add to quote

Can anybody tell me why my cruise control light would be stuck on? I haven't used the cruise control on the car. Today when I took the car for a spin the cruise control light was on. I pressed the button on the dash that activates cruise control and nothing happened. The light stays on and cruise control doesn't work.....help.  

BUMP...for help>>> My cruise control light is still on and I can't figure out why....or how to fix it. Oh, and my cruise control isn't working either.....  

bumpity bump bump....any ideas at all>>>  

Im stumped as well. I have been sitting here reading the schematic and it doesn't really seem to be wired into anything else. It could be the servo or relay since it isn't working.  

I looked at the electric diagram and I couldn't see a reason why it would light up but not work. Even the troubleshooting flowchart, which has like 35 reasons the cruise control won't work, doesn't have a starting point where the light is stuck on. Do you think it could be that I have the control module hooked up improperly somehow? Is there a vacuum line that could be pinched or simply unhooked? I know nothing about the cruise control system and have never really used it on the Del Sol....but I can't bring myself to just take the bulb out of the gauge and forget about it. I HAVE to fix it...you know.  

There is a vacuum line that runs the servo motor which is how it maintains vehicle speed. Check the vacuum lines. I would think that if it were disconnected it would affect the idle. Also from what I have read it is saying there is a fuses and relay. I don't have cruise so I have no idea where these are located.  

I looked at the cruise control servo actuator and it doesn't have any sort of vacuum line attached to it. During my installation of a new power steering belt and alternator belt I had to disconnect the servo actuator electrical plug. However, that is all that I did. I never touched anything under the dash where the cruise control box is. So, is it possible that by detaching the servo motor I shorted out or damaged the actual cruise control box under the dash? Do all 1993 era Civics have a vacuum line attached to the cruise control? I I think that something is wrong with the engine wiring harness / cruise control servo motor since that is all I touched. HELP  

Did you plug it back in? I honestly don't know because I don't have cruise but my mom does. I will go to her house tomorrow and check. Yeah thats right my mom is whipping a 95 civic ex coupe.:cool  

I plugged it back in. Everything seems fine on that end of things. However, cruise still doesn't work. And everybody in Japan whips a 95 civic ex. HA!~  

I have since checked almost everything in the cruise control system. Now the light stays off but the cruise control will not engage. When I press the switch to activate the cruise control the gauge the dash light stays off and the cruise doesn't work. Any more ideas???  

Well after not getting anywhere on the forum with this I obtained a new cruise control module from a junked 1993 Del Sol Si with a manual transmission. I got it off of egay for $18. I will let you all know if the new module corrects my problem.  

dude, you take a punch, a well calibrated punch and a hammer. aim the punch at the light that stays on continuously and give it one good slam. make sure to calibrate the hammer and your elbow as well, because if you miss you could break something else  

I could just buy some trained hamsters and have them sit on the gas pedal. Of course they would have to be exactly the right weight. I would need several different sizes to achieve the desired pedal level and speed.:ninja Front, Back, Side-to-Side Front, Front, Back, Back, Side-to-Side  

nice  

I replaced the cruise control computer and it didn't make any difference. Does anybody have any ideas about why my cruise control isn't working? The actuator works, the ECU works, the brake lights work, the cruise control buttons on the steering wheel work, the gas pedal works...etc...etc...etc. Any help would be helpful.  

cable on throttle body goofed up? or is that what you meant by actuator?  

did you check teh switches mounted on the pedals? could be like a brake switch and have a plastic piece easily broken. even without using the cruising switch, it still pushes on it whenever you push down on the gas, brake, or clutch pedals just a thought :dunno:  

pull the fucking bulb out.... who the fuck needs cruise control....?  

• ?            
• 170.1K members

Top Contributors this Month

• Forum Listing
• Marketplace
• Advanced Search
• Civic Style
• I.C.E., Electrical, Security, & Navigation

Cruise Control on a DX

• Add to quote

I'm looking to install Cruise in my 07 DX. Now I've seen the XK601 ? I think its called, but I'm sure there is another way. It just seems klunky. I've seen the thread on installing Audio controls in the steering wheel, and they come with the cruise control switches! But I don't really want to tear apart my steering wheel to find out that my DX has a different wiring harness. Now even if it does have a different harness, where would the cruise wires go to? Is it to the (Computer?) And if so would my DX even have the programming for cruise? I somehow imagine that you could even go so far as replacing the wiring harness and computer from an EX/LX, but what else would be required? I know someone here has the knowledge, and I would appreciate any info on how to proceed. Thankyou  

bump bump  

Im guessing because of the drive-by-wire, it would go through a computer. I highly doubt its the same wiring harness. Would of been alot easier to just buy a LX...  

This has been talked about a lot. But, I'm not sure this has been tried yet. If you have some free time, check out the parts list at www.hondapartsdeals.com and compare part numbers for the harnesses on the different models. I'm sure it would work, but if you're the first to do it, it'll just take some time and some trial/error. Good luck. Edit: Here are a couple links that might help. http://www.8thcivic.com/forums/showthread.php?t=32726 http://www.8thcivic.com/forums/showthread.php?t=18873&page=3  

If you haven't put much work into your DX, you may want to off load it and purchase an LX model. Unfortunately, DX models are really stripped down. You can do alot of aftermarket things to them, but for cruise control, just get an LX. You may also want to check with your insurance company and state law to see if you can have it retrofitted into this car.  

Thanks for responding... I took a look at hondapartsdeals... Looks like the harness and control module would need to be replaced, with a cost of ~$600 almost the same as the xk601 is installed.... its almost worth it but a lot more work involved...as an added benefit you could get steering wheel audio controls.. The reason I'm so interested in Cruise is I'm on the road ~3 1/2 hours a day, all highway, my leg is geting sore keeping my foot on the gas all the time!!  

Should have gotten an Si....  

You can look at Rostra.com to see what they have. They mite have something for you.  

http://www.8thcivic.com/forums/showthread.php?t=63696  

I have 2 civics and my older one had the cruise control in it so I took it out and went to my DX civic and putt it in and there was nothing so I’m guessing it has something to do with the ECU (computer)  

• ?            
• 157.9K members

Top Contributors this Month

Moscow Sky Lights Up With Strange Glow After Explosion at Electrical Substation: Reports

N ew footage has emerged showing bright flashes lighting up the night sky in southern Moscow during the early morning hours of November 22.

Knewz.com has learned that there was an explosion at an electrical substation on the outskirts of Russia's capital city followed by an alleged power outage in "several" homes.

Video snippets, shared on Russian news channels like ASTRA , captured a series of flashes that caused the sky to change color. Smoke could also be seen rising from a building.

Corroborating the video, several Russian Telegram accounts reported an explosion near the south of Moscow and a subsequent fire at the Lyublino electrical substation, southeast of central Moscow, per Newsweek .

The local authorities from the area have since confirmed that an explosion occurred in the village of Molokovo, but they reassured the public that all vital facilities were operating as normal.

Russian outlet MSK1.ru reported the blaze at the substation and noted “several” power outages.

The town of Lytkarino, located to the southeast of Moscow, was one of the affected areas, as reported by the independent outlet, Meduza .

Additional power failures were reported in the southern Domodedovo section of the city. However, electricity was later restored to these areas.

One local resident speculated that a drone may have been responsible for the explosion, but additional sources are yet to support this theory.

Newsweek reported that messages on the ASTRA Telegram account run by independent Russian journalists showed residents near the substation panicking. One concerned Russian called it a "nightmare."

The incident follows an attack by Russia on a power station in southwestern Ukraine that left 2,000 people without electricity .

Knewz.com reported previously:

“ Russian forces launched a total of 38 Iranian-made Shahed-136/131 drones during the later hours of November 17 and 18.

The Ukrainian Air Force Command reported that 29 of these drones were shot down [...].

One civilian was injured as a result of the attack that targeted energy infrastructure in the southwestern Odesa Oblast.”

The assault came after repeated warnings by Ukraine’s President Volodymyr Zelensky that Russia would try to cripple its power grid as winter approaches.

Ukraine's leader warned that if Russia resorted to attacking its power utilities, it would respond in kind.

Ukraine has conducted numerous long-range aerial drone strikes on Moscow since May 2023.

Most recently on November 20, it was reported that one such incursion was intercepted close to the city, per Kyiv Post .

Moscow’s Mayor Sergei Sobyanin confirmed this and elaborated that the region's air defense systems intercepted the unmanned craft over the city of Elektrostal to the east of Moscow, as well as another over the Bogorodsky district, northeast of central Moscow.

The details of the recently surfaced video footage have yet to be independently verified.

• Popular Professionals
• Design & Planning
• Construction & Renovation
• Finishes & Fixtures
• Landscaping & Outdoor
• Systems & Appliances
• Interior Designers & Decorators
• Architects & Building Designers
• Design-Build Firms
• Kitchen & Bathroom Designers
• General Contractors
• Kitchen & Bathroom Remodelers
• Home Builders
• Roofing & Gutters
• Cabinets & Cabinetry
• Tile & Stone
• Hardwood Flooring Dealers
• Landscape Contractors
• Landscape Architects & Landscape Designers
• Home Stagers
• Swimming Pool Builders
• Lighting Designers and Suppliers
• 3D Rendering
• Sustainable Design
• Basement Design
• Architectural Design
• Universal Design
• Energy-Efficient Homes
• Multigenerational Homes
• House Plans
• Home Remodeling
• Home Additions
• Green Building
• Garage Building
• New Home Construction
• Basement Remodeling
• Stair & Railing Contractors
• Cabinetry & Cabinet Makers
• Roofing & Gutter Contractors
• Window Contractors
• Exterior & Siding Contractors
• Carpet Contractors
• Carpet Installation
• Flooring Contractors
• Wood Floor Refinishing
• Tile Installation
• Custom Countertops
• Quartz Countertops
• Cabinet Refinishing
• Custom Bathroom Vanities
• Finish Carpentry
• Cabinet Repair
• Custom Windows
• Window Treatment Services
• Window Repair
• Fireplace Contractors
• Paint & Wall Covering Dealers
• Door Contractors
• Glass & Shower Door Contractors
• Landscape Construction
• Land Clearing
• Garden & Landscape Supplies
• Deck & Patio Builders
• Deck Repair
• Patio Design
• Stone, Pavers, & Concrete
• Paver Installation
• Driveway & Paving Contractors
• Driveway Repair
• Asphalt Paving
• Garage Door Repair
• Fence Contractors
• Fence Installation
• Gate Repair
• Pergola Construction
• Spa & Pool Maintenance
• Swimming Pool Contractors
• Hot Tub Installation
• HVAC Contractors
• Electricians
• Appliance Services
• Solar Energy Contractors
• Outdoor Lighting Installation
• Landscape Lighting Installation
• Outdoor Lighting & Audio/Visual Specialists
• Home Theater & Home Automation Services
• Handyman Services
• Closet Designers
• Professional Organizers
• Furniture & Accessories Retailers
• Furniture Repair & Upholstery Services
• Specialty Contractors
• Color Consulting
• Wine Cellar Designers & Builders
• Home Inspection
• Custom Artists
• Columbus, OH Painters
• New York City, NY Landscapers
• San Diego, CA Bathroom Remodelers
• Minneapolis, MN Architects
• Portland, OR Tile Installers
• Kansas City, MO Flooring Contractors
• Denver, CO Countertop Installers
• San Francisco, CA New Home Builders
• Rugs & Decor
• Home Improvement
• Kitchen & Tabletop
• Bathroom Vanities
• Bathroom Vanity Lighting
• Bathroom Mirrors
• Bathroom Fixtures
• Nightstands & Bedside Tables
• Kitchen & Dining
• Bar Stools & Counter Stools
• Dining Chairs
• Dining Tables
• Buffets and Sideboards
• Kitchen Fixtures
• Wall Mirrors
• Living Room
• Armchairs & Accent Chairs
• Coffee & Accent Tables
• Sofas & Sectionals
• Media Storage
• Patio & Outdoor Furniture
• Outdoor Lighting
• Ceiling Lighting
• Chandeliers
• Pendant Lighting
• Wall Sconces
• Desks & Hutches
• Office Chairs
• View All Products
• Designer Picks
• Side & End Tables
• Console Tables
• Living Room Sets
• Chaise Lounges
• Ottomans & Poufs
• Bedroom Furniture
• Nightstands
• Bedroom Sets
• Dining Room Sets
• Sideboards & Buffets
• File Cabinets
• Room Dividers
• Furniture Sale
• Trending in Furniture
• View All Furniture
• Bath Vanities
• Single Vanities
• Double Vanities
• Small Vanities
• Transitional Vanities
• Modern Vanities
• Houzz Curated Vanities
• Best Selling Vanities
• Bathroom Vanity Mirrors
• Medicine Cabinets
• Bathroom Faucets
• Bathroom Sinks
• Shower Doors
• Showerheads & Body Sprays
• Bathroom Accessories
• Bathroom Storage
• Trending in Bath
• View All Bath
• Houzz x Jennifer Kizzee
• Houzz x Motivo Home
• How to Choose a Bathroom Vanity

• Patio Furniture
• Outdoor Dining Furniture
• Outdoor Lounge Furniture
• Outdoor Chairs
• Adirondack Chairs
• Outdoor Bar Furniture
• Outdoor Benches
• Wall Lights & Sconces
• Outdoor Flush-Mounts
• Landscape Lighting
• Outdoor Flood & Spot Lights
• Outdoor Decor
• Outdoor Rugs
• Outdoor Cushions & Pillows
• Patio Umbrellas
• Lawn & Garden
• Garden Statues & Yard Art
• Planters & Pots
• Outdoor Sale
• Trending in Outdoor
• View All Outdoor
• 8 x 10 Rugs
• 9 x 12 Rugs
• Hall & Stair Runners
• Home Decor & Accents
• Pillows & Throws
• Decorative Storage
• Faux Florals
• Wall Panels
• Window Treatments
• Curtain Rods
• Blackout Curtains
• Blinds & Shades
• Rugs & Decor Sale
• Trending in Rugs & Decor
• View All Rugs & Decor
• Pendant Lights
• Flush-Mounts
• Ceiling Fans
• Track Lighting
• Wall Lighting
• Swing Arm Wall Lights
• Display Lighting
• Table Lamps
• Floor Lamps
• Lamp Shades
• Lighting Sale
• Trending in Lighting
• View All Lighting
• Bathroom Remodel
• Kitchen Remodel
• Kitchen Faucets
• Kitchen Sinks
• Major Kitchen Appliances
• Cabinet Hardware
• Backsplash Tile
• Mosaic Tile
• Wall & Floor Tile
• Accent, Trim & Border Tile
• Whole House Remodel
• Heating & Cooling
• Building Materials
• Front Doors
• Interior Doors
• Home Improvement Sale
• Trending in Home Improvement
• View All Home Improvement
• Cups & Glassware
• Kitchen & Table Linens
• Kitchen Storage and Org
• Kitchen Islands & Carts
• Food Containers & Canisters
• Pantry & Cabinet Organizers
• Kitchen Appliances
• Gas & Electric Ranges
• Range Hoods & Vents
• Beer & Wine Refrigerators
• Small Kitchen Appliances
• Cookware & Bakeware
• Tools & Gadgets
• Kitchen & Tabletop Sale
• Trending in Kitchen & Tabletop
• View All Kitchen & Tabletop
• Storage & Organization
• Baby & Kids

• View all photos
• Dining Room
• Breakfast Nook
• Family Room
• Bed & Bath
• Powder Room
• Storage & Closet
• Outdoor Kitchen
• Bar & Wine
• Wine Cellar
• Home Office
• Popular Design Ideas
• Kitchen Backsplash
• Deck Railing
• Privacy Fence
• Small Closet
• Stories and Guides
• Popular Stories
• Renovation Cost Guides
• Fence Installation Cost Guide
• Window Installation Cost Guide
• Discussions
• Design Dilemmas
• Before & After
• Houzz Research
• View all pros
• View all services
• View all products
• View all sales
• Living Room Chairs
• Dining Room Furniture
• Coffee Tables
• Home Office Furniture
• Join as a Pro
• Interior Design Software
• Project Management
• Custom Website
• Lead Generation
• Invoicing & Billing
• Landscape Contractor Software
• General Contractor Software
• Remodeler Software
• Builder Software
• Roofer Software
• Architect Software
• Takeoff Software
• Lumber & Framing Takeoffs
• Steel Takeoffs
• Concrete Takeoffs
• Drywall Takeoffs
• Insulation Takeoffs
• Stories & Guides
• LATEST FROM HOUZZ
• HOUZZ DISCUSSIONS
• SHOP KITCHEN & DINING
• Kitchen & Dining Furniture
• Sinks & Faucets
• Kitchen Cabinets & Storage
• Knobs & Pulls
• Kitchen Knives
• KITCHEN PHOTOS
• FIND KITCHEN PROS
• Bath Accessories
• Bath Linens
• BATH PHOTOS
• FIND BATH PROS
• SHOP BEDROOM
• Beds & Headboards
• Bedroom Decor
• Closet Storage
• Bedroom Vanities
• BEDROOM PHOTOS
• Kids' Room
• FIND DESIGN PROS
• SHOP LIVING
• Fireplaces & Accessories
• LIVING PHOTOS
• SHOP OUTDOOR
• Pool & Spa
• Backyard Play
• OUTDOOR PHOTOS
• FIND LANDSCAPING PROS
• SHOP LIGHTING
• Bathroom & Vanity
• Flush Mounts
• Kitchen & Cabinet
• Outdoor Wall Lights
• Outdoor Hanging Lights
• Kids' Lighting
• Decorative Accents
• Artificial Flowers & Plants
• Decorative Objects
• Screens & Room Dividers
• Wall Shelves
• About Houzz
• Houzz Credit Cards
• Privacy & Notice
• Cookie Policy
• Your Privacy Choices
• Mobile Apps
• Copyright & Trademark
• For Professionals
• Houzz vs. Houzz Pro
• Houzz Pro vs. Ivy
• Houzz Pro Advertising Reviews
• Houzz Pro 3D Floor Planner Reviews
• Trade Program
• Buttons & Badges
• Your Orders
• Shipping & Delivery
• Return Policy
• Houzz Canada
• Review Professionals
• Suggested Professionals
• Accessibility
• Houzz Support
• COUNTRY COUNTRY

Home & House Stagers in Elektrostal'

Location (1).

• Use My Current Location

Popular Locations

• Albuquerque
• Cedar Rapids
• Grand Rapids
• Indianapolis
• Jacksonville
• Kansas City
• Little Rock
• Los Angeles
• Minneapolis
• New Orleans
• Oklahoma City
• Orange County
• Philadelphia
• Portland Maine
• Salt Lake City
• San Francisco
• San Luis Obispo
• Santa Barbara
• Washington D.C.
• Elektrostal', Moscow Oblast, Russia

Professional Category (1)

• Accessory Dwelling Units (ADU)

Featured Reviews for Home & House Stagers in Elektrostal'

• Reach out to the pro(s) you want, then share your vision to get the ball rolling.
• Request and compare quotes, then hire the Home Stager that perfectly fits your project and budget limits.

A home stager is a professional who prepares a house for sale, aiming to attract more buyers and potentially secure a higher selling price. They achieve this through the following techniques:

• Rearranging furniture to optimize space and functionality.
• Decluttering to create a clean and spacious look.
• Making repairs to address visible issues.
• Enhancing aesthetics with artwork, accessories, and lighting.
• Introducing new furnishings to update the style.

Their goal is to present the house in the best light. Home stagers in Elektrostal' help buyers envision themselves living there, increasing the chances of a successful sale.

• Decluttering
• Furniture Selection
• Space Planning
• Art Selection
• Accessory Selection

Benefits of the home staging in Elektrostal':

• Attractive and inviting: Staging creates a welcoming atmosphere for potential buyers.
• Faster sale: Homes sell more quickly, reducing time on the market.
• Higher sale price: Staging can lead to higher offers and appeal to a wider range of buyers.
• Showcasing best features: Strategic arrangement highlights positives and minimizes flaws.
• Stand out online: Staged homes capture attention in online listings.
• Emotional connection: Staging creates a positive impression that resonates with buyers.
• Easy visualization: Buyers can easily picture themselves living in a staged home.
• Competitive advantage: Staging sets your home apart from others on the market.
• Affordable investment: Cost-effective way to maximize selling potential and ROI.
• Professional expertise: Experienced stagers ensure optimal presentation for attracting buyers.

What does an Elektrostal' home stager do?

What should i consider before hiring an interior staging company, questions to ask potential real estate staging companies in elektrostal', moscow oblast, russia:, business services, connect with us.