trek emonda sl6 seat mast

Weight Weenies

Skip to content

• Active topics
• Board index Discussion Road

Emonda SL series seat post LIMITATIONS.

Moderator: robbosmans

Post by jimonwheels » Thu Jul 02, 2015 6:17 am --> by jimonwheels on Thu Jul 02, 2015 6:17 am

by » Thu Jul 02, 2015 6:17 am --> by Weenie on Thu Jul 02, 2015 6:17 am

Post by amey » Thu Jul 02, 2015 9:35 am --> by amey on Thu Jul 02, 2015 9:35 am

Post by nickinco » Thu Jul 02, 2015 1:27 pm --> by nickinco on Thu Jul 02, 2015 1:27 pm

Post by koulis1984 » Thu Jul 02, 2015 3:16 pm --> by koulis1984 on Thu Jul 02, 2015 3:16 pm

nickinco wrote: Just like cases where a rider needs a different stem, bar, etc, to achieve the proper fit, the longer seatmast is an aftermarket item. Trek will not swap the part just like they won't swap a stem if the stock on is not the right size for you. Best bet is to resell if like amey said, or to ask your LBS about a trade-in - we give a sizable discount on the new mast to customers who trade in their stock one. It can be a bit of a nuisance but I don't think it's worth writing off the Emonda or sizing up to avoid the issue.

Post by Calnago » Thu Jul 02, 2015 3:35 pm --> by Calnago on Thu Jul 02, 2015 3:35 pm

Post by grover » Fri Jul 03, 2015 12:05 am --> by grover on Fri Jul 03, 2015 12:05 am

Post by Calnago » Fri Jul 03, 2015 12:44 am --> by Calnago on Fri Jul 03, 2015 12:44 am

Post by djm » Fri Jul 03, 2015 1:49 pm --> by djm on Fri Jul 03, 2015 1:49 pm

Post by 0psi » Fri Jul 03, 2015 2:06 pm --> by 0psi on Fri Jul 03, 2015 2:06 pm

djm wrote: If it was me and I was aware of the limitation, I wouldn't buy it unless the seller was able to provide a long enough post.. So they won't do it? No sale to me then.

Post by madcow » Fri Jul 03, 2015 3:45 pm --> by madcow on Fri Jul 03, 2015 3:45 pm

Post by eliflap-scalpel » Fri Jul 03, 2015 4:03 pm --> by eliflap-scalpel on Fri Jul 03, 2015 4:03 pm

Post by garysol1 » Fri Mar 11, 2016 4:49 am --> by garysol1 on Fri Mar 11, 2016 4:49 am

Post by Calnago » Fri Mar 11, 2016 4:51 am --> by Calnago on Fri Mar 11, 2016 4:51 am

Post by garysol1 » Fri Mar 11, 2016 4:59 am --> by garysol1 on Fri Mar 11, 2016 4:59 am

Calnago wrote: The taller mast will look much better on it anyway. How much do they charge for just the seat mast?

by » Fri Mar 11, 2016 4:59 am --> by Weenie on Fri Mar 11, 2016 4:59 am

Post by Calnago » Fri Mar 11, 2016 5:01 am --> by Calnago on Fri Mar 11, 2016 5:01 am

Return to “Road”

• ↳   Weight Weenies
• ↳   Introduce Yourself / Gallery - Please use metric weights.
• ↳   Catch all // Gallery threads
• ↳   MTB
• ↳   Road
• ↳   Wheelsets & Tires (Road)
• ↳   Bike Travel, Cycling Tourism, Destinations & Events
• ↳   Cycling Kits
• ↳   Watt Weenies Forum
• ↳   CX & Gravel
• ↳   Randonneurring, Bikepacking, Commuting, E-Bikes
• ↳   Training
• ↳   Cycle Chat
• Marketplace
• ↳   For sale - Pictures are mandatory 22-3-13
• ↳   Wanted
• ↳   Hero or Villain
• ↳   Comments
• Board index
• All times are UTC

Powered by phpBB ® Forum Software © phpBB Limited

Privacy | Terms

Latest blog postings

Popular blog postings.

• Advertising

• off.road.cc
• Dealclincher
• Fantasy Cycling

Support road.cc

Like this site? Help us to make it better.

• Sportive and endurance bikes
• Gravel and adventure bikes
• Urban and hybrid bikes
• Touring bikes
• Cyclocross bikes
• Electric bikes
• Folding bikes
• Fixed & singlespeed bikes
• Children's bikes
• Time trial bikes
• Accessories - misc
• Computer mounts
• Bike bags & cases
• Bottle cages
• Child seats
• Lights - front
• Lights - rear
• Lights - sets
• Pumps & CO2 inflators
• Puncture kits
• Reflectives
• Smart watches
• Stands and racks
• Arm & leg warmers
• Base layers
• Gloves - full finger
• Gloves - mitts
• Jerseys - casual
• Jerseys - long sleeve
• Jerseys - short sleeve
• Shorts & 3/4s
• Tights & longs
• Bar tape & grips
• Bottom brackets
• Brake & gear cables
• Brake & STI levers
• Brake pads & spares
• Cassettes & freewheels
• Chainsets & chainrings
• Derailleurs - front
• Derailleurs - rear
• Gear levers & shifters
• Handlebars & extensions
• Inner tubes
• Quick releases & skewers
• Energy & recovery bars
• Energy & recovery drinks
• Energy & recovery gels
• Heart rate monitors
• Hydration products
• Hydration systems
• Indoor trainers
• Power measurement
• Skincare & embrocation
• Training - misc
• Cleaning products
• Lubrication
• Tools - multitools
• Tools - Portable
• Tools - workshop
• Books, Maps & DVDs
• Camping and outdoor equipment
• Gifts & misc

First up, the comfort.

I picked up on the fact that the SL6 Pro has quite a firm ride – a little bit old school, dare I say. By that I mean that a lot of carbon fibre frames have become much more comfortable over the years as designers and manufacturers have learnt about carbon fibre grades, tube profiles and, more importantly, the layup of the composite material.

The Cube Attain GTC SL I tested recently highlighted this in the way that it really managed to reduce road buzz while retaining plenty of feedback through the frame and fork.

This isn't a criticism of the Trek at all, it just wasn't quite what I was expecting. I like it; I'm a big believer in ultimate performance over comfort when it comes to race bikes, and that is exactly what the Émonda delivers.

Stiffness throughout the fork and the lower half of the frame is very impressive, and means the Trek is responsive to your inputs. The wide bottom bracket shell allows for a large down tube and chunky chainstays to reduce flex when you are really nailing it, while the front end backs this up via the tapered head tube and firm fork legs. Sprinting and climbing are all taken in the Émonda's stride.

As you'd expect from a race bike, the riding position can be set up to be pretty aggressive – with a relatively short 151mm head tube length on this 56cm model I could achieve a low handlebar-to-saddle drop to aid the aerodynamics, especially when in the drops.

The rest of the geometry follows the same theme with a 73.5-degree head angle and a relatively short wheelbase for a disc-equipped frame (the chainstays are often a fair bit longer than those on rim-braked frames because of the extra axle width at the rear dropouts) at just 983mm.

Trek has achieved a good balance here with the Émonda I reckon.

The shorter wheelbase makes it nippy, which allows for snappy direction changes at high speed, yet it's managed to tame the handling just enough that the Émonda never becomes a handful unless you do something really stupid.

In my First Ride piece I mentioned that I hadn't managed to point the Trek at my favourite test hill, one that is fast and twisty with off-camber bends and chicanes. It really tests every part of a bike's handling in a blur.

Well, I have now, about five or six times, and the Émonda really impressed. It has the quickness in the steering and the overall agility to be pushed very hard into the corners.

After a night of heavy rain, gravel had been washed out into the lane slightly out of sight as I went into a fast left-hander at about 45mph; I dabbed the brakes a little, but seeing the grit and stones spanning the entire road there was no real way out of it. Letting the bike hit the gravel and predicting where the slide was probably going to end was the only option, and it was a sketchy couple of seconds.

As the front tyre regained grip on the asphalt there was a second where the still-sliding rear wanted to get in front, but the Trek's well-balanced handling allowed me to quickly regain control and blast to the bottom of the hill.

In less extreme circumstances the Émonda is an absolute hoot to ride downhill, with just slight adjustments to body position and the handlebar allowing you to flow from corner to corner.

On longer rides the Trek is just as well mannered; it is a very easy bike to ride quickly even when fatigue can kick in or when you are on unfamiliar roads.

The stiffness I mentioned earlier doesn't come through as a negative on higher mileage jaunts, especially if you get on with the saddle and have a decent pair of shorts on. The three- to four-hour rides I used the Trek on were a lot of fun. Unleash the power for the fun bits and then when you are on the flat, straight slogs you can just hunker down and keep the pedals turning over.

The only thing I needed to do was to shift the saddle 5mm closer to the bar than I would normally have it, because of the width of the top tube as it flows into the seatstays either side of the seat tube. I have quite large thighs and I could feel them rubbing on the frame every pedal revolution when I first started riding the Trek.

Frame and fork

The Émonda has always been the lightweight bike of Trek's road range, leaving outright speed to the Madone, but for this latest model Trek has incorporated more aerodynamic profiles in the Émonda's design.

Unlike most aero bikes, though, the Émonda's frame doesn't focus on being fast in a straight line or at high speed, it is a climbing bike after all. Instead the engineers have focused on 'unsteady aerodynamics', which fit in with the much lower speeds found when ascending.

Most of the attention has been placed on the front end, including the head tube and down tube. The top-end SLR models use the Bontrager XXX aero handlebar/stem combo which further increases the benefits, but that isn't available on the SL options.

The SLR models also use a new OCLV 800 grade carbon fibre while the SLs use the 500 series, which increases the weight a bit, although a claimed frame weight of 1,142g and 380g for the fork is far from shabby.

If wind cheating is your main goal then it's worth noting that the Émonda is optimised for 25mm tyres, as that is the most common size used for racing, but if you want something a bit wider 28mm will fit while still allowing 6mm of space around the tyre.

As you'd expect on an aero-based bike, the Émonda has full internal cable routing but this is taken to an extra level compared with most frames, with the cables and hoses leaving the handlebar and entering the frame through the spacers rather than the head tube or down tube. This gives much cleaner lines at the front.

You won't find a standard seatpost either. The Émonda's seat tube continues up past the top tube by a fair old way and then an external seat mast is placed over the top; you tighten the hex bolt to clamp it into place at the right saddle height.

The Émonda range is now completely disc brake-equipped which to my mind is a bit of a shame as I am a big fan of rim brakes, and it would certainly bring the weight down for a bike aimed at climbing.

Many manufacturers are seeing sales of disc models outstripping rim options by a large margin, though, so it is kind of inevitable. There is also the cost – the Émonda is available in seven sizes so that'd be 14 different moulds required if Trek offered both brake options.

The Émonda comes with flat mounts, as you'd expect, and 12mm thru-axles front and rear.

I mentioned the wide bottom bracket shell earlier and this is normally only achievable by using a press-fit BB, where the bearing cups are pressed into the frame. If tolerances aren't adhered to, creaking can occur, especially after water or grit gets between the mating faces, which is why we've seen many brands return to external threaded options.

Trek has gone for what is possibly the best of both worlds with the T47 system. First introduced by Chris King and Oregon's Argonaut Cycles , they thread into the bottom bracket shell which allows it to be wider, increasing stiffness without affecting the width between the pedals (Q-factor).

If you want a more in-depth look at what changes and design tweaks were made to achieve this new Émonda frameset then it'd be worth checking out Mat's full breakdown here .

Wheels and tyres

Trek says that the SL 6 Pro comes with all the lightweight components you need as standard, so there is no need to upgrade. You could save a few grams here and there, but overall it is a pretty complete package.

This model is the first carbon bike in the line-up that comes with a set of carbon fibre wheels. The 35mm Bontrager Aeolus Elite 35s are 35mm deep and are tubeless ready.

It's a good set of wheels for a whole range of riding styles: shallow enough to work on the climbs and just about deep enough to give you a small aerodynamic gain without being affected by crosswinds. Comparing the price of the near-identical SL 6 suggests you are getting them for just £450 too.

Reliability isn't an issue as they took on everything that was put in their way over the test period, and should anything happen and they get damaged Trek will replace or repair them for free in the first two years of ownership.

Wrapped around the wheels are a pair of Bontrager R2 Hard-Case Lite tyres. They are all right in terms of rolling resistance, grip and durability, but their 60tpi casing does give them a bit of a 'wooden' feel. You aren't getting a whole lot of suppleness which would really benefit the frameset, so I'd definitely upgrade when they wear out.

I've been using the R3 Hard Case Lites recently and they are a much better tyre, so something like that would be a good upgrade if you want to keep the Bonty/Trek theme going.

Drivetrain and brakes

On the SL 6 Pro, Trek is giving you a full Shimano Ultegra hydraulic/mechanical groupset and it suits the bike very well. You are getting near-Dura-Ace performance but at a much reduced price.

Trek has specced a 52/36-tooth semi-compact chainset and an 11-30 cassette, which is a great choice of gear ratios for a bike of this style. There are plenty of top end gears for speed work while the 30-tooth sprocket will give you an extra bailout gear over the more usual 28T found on the majority of race bikes.

The gear shifts from Ultegra are top notch. You get quite a light feel at the levers, but one that also gives a very nicely defined click so you can be sure that the shift has taken place.

When it comes to the braking, Trek has chosen to fit 160mm rotors front and back, which give more than enough power for a bike of this type.

Shimano's hydraulic systems are very powerful but also easily modulated thanks to loads of feel through the levers, allowing you to stop quickly without the fear of locking up the front tyre, even in the wet.

Finishing kit

All of the finishing kit is supplied by Bontrager, Trek's in-house parts department, and it's all decent quality stuff.

The handlebar is the Bontrager Elite VR-C which is an aluminium alloy model with a short reach and a shallow drop, making it ideal for a whole host of different riders' proportions. Helping that is the fact that different size frames get a different width bar, ranging from 38cm up to 44cm.

It's the same for the Bontrager Pro stem: the smallest 47cm bike gets a 70mm unit, with the 62cm extending that out to 110mm. The stem on each frame size seems to come up a bit shorter than most bikes of this type, but it seems to work.

I got on fine with the Aeolus Comp saddle. Its shape is well suited to riding hard and fast, and I like the firm padding which gives you a good platform to push against when you are really hammering it. (There's a separate review of it here .) 

This SL 6 Pro model has an rrp of £3,350, which isn't a bad deal for what you are getting here with the aero carbon frame, fork and deep-section wheels.

> Buyer’s Guide: 21 of the best 2020 aero road bikes

The similarly themed Scott Addict RC 30 is £3,199 and also come comes with an Ultegra groupset, but it is begging for an upgrade to the wheelset. It is light, though, at just 7.88kg.

If it's aero that you want then there is the Orro Venturi . The closest model in price is £3,299.99; you only get alloy wheels, but you are getting Ultegra Di2 for the gear shifting.

Overall, the Émonda is a very good bike. The aero tweaks have turned it into a very fast and efficient bike that still manages to deliver on the weight front and this SL 6 Pro model is so well specced there's no need to update anything when it comes to the components, just the tyres when they wear out.

A quality frameset that works both on the flat and the climbs, and well specced for the money

road.cc test report

Make and model: Trek Emonda SL 6 Pro 2021

Size tested: 56cm

About the bike

List the components used to build up the bike.

Trek lists:

Front wheel Bontrager Aeolus Elite 35, OCLV Carbon, Tubeless Ready, 35 mm rim depth, 100x12 mm thru axle

Rear wheel Bontrager Aeolus Elite 35, OCLV Carbon, Tubeless Ready, 35 mm rim depth, Shimano 11-speed freehub, 142x12 mm thru axle

Tyre Bontrager R2 Hard-Case Lite, aramid bead, 60 tpi, 700x25 c

Max tyre size 28c

*Shifter Size: 47, 50, 52

Shimano Ultegra R8025, short-reach lever, 11-speed

Size: 54, 56, 58, 60, 62

Shimano Ultegra R8020, 11-speed

Front derailleur Shimano Ultegra R8000, braze-on

Rear derailleur Shimano Ultegra R8000, short cage, 30T max cog

*Crank Size: 47

Shimano Ultegra R8000, 52/36, 165 mm length

Size: 50, 52

Shimano Ultegra R8000, 52/36, 170 mm length

Size: 54, 56, 58

Shimano Ultegra R8000, 52/36, 172.5 mm length

Size: 60, 62

Shimano Ultegra R8000, 52/36, 175 mm length

Bottom bracket Praxis, T47 threaded, internal bearing

Cassette Shimano Ultegra R8000, 11-30, 11-speed

Chain Shimano Ultegra HG701, 11-speed

Max. chainring size 1x: 50T; 2x: 53/39T

Saddle Bontrager Aeolus Comp, steel rails, 145 mm width

*Seatpost Size: 47, 50, 52, 54

Bontrager carbon seat mast cap, 20 mm offset, short length

Size: 56, 58, 60, 62

Bontrager carbon seat mast cap, 20 mm offset, tall length

*Handlebar Size: 47, 50

Bontrager Elite VR-C, alloy, 31.8 mm, 100 mm reach, 124 mm drop, 38 cm width

Bontrager Elite VR-C, alloy, 31.8 mm, 100 mm reach, 124 mm drop, 40 cm width

Bontrager Elite VR-C, alloy, 31.8 mm, 100 mm reach, 124 mm drop, 42 cm width

Bontrager Elite VR-C, alloy, 31.8 mm, 100 mm reach, 124 mm drop, 44 cm width

Handlebar tape Bontrager Supertack Perf tape

*Stem Size: 47

Bontrager Pro, 31.8 mm, Blendr-compatible, 7-degree, 70 mm length

Bontrager Pro, 31.8 mm, Blendr-compatible, 7-degree, 80 mm length

Size: 52, 54

Bontrager Pro, 31.8 mm, Blendr-compatible, 7-degree, 90 mm length

Bontrager Pro, 31.8 mm, Blendr-compatible, 7-degree, 100 mm length

Size: 58, 60, 62

Bontrager Pro, 31.8 mm, Blendr-compatible, 7-degree, 110 mm length

Brake Shimano Ultegra hydraulic disc

Brake rotor Shimano RT800, 160 mm, CenterLock

Tell us what the bike is for and who it's aimed at. What do the manufacturers say about it? How does that compare to your own feelings about the bike?

Trek says, "Émonda SL 6 Disc Pro is the first carbon road bike in the line-up that gives you lightweight carbon wheels to match your lightweight frame. Aero tube shaping, disc brakes and a high-performance drive train make it a great option for roadies who value great handling and lots of speed."

Where does this model sit in the range? Tell us briefly about the cheaper options and the more expensive options

There are five models in the range starting with the SL 5 which comes with a Shimano 105 groupset for £2,725, finishing off with the SL 7 with SRAM eTap at £5,250.

A frameset is also available for £2,200.

Tell us about the build quality and finish of the frame and fork?

A well made and finished frame and fork.

Tell us about the materials used in the frame and fork?

Frame – Ultralight 500 Series OCLV Carbon, Ride Tuned performance tube optimisation, tapered head tube, internal routing, DuoTrap S-compatible, flat-mount disc, 142x12 mm thru axle

Fork – Emonda SL full carbon, tapered carbon steerer, internal brake routing, flat-mount disc, 12x100 mm thru axle

Tell us about the geometry of the frame and fork?

The geometry is race orientated with a steepish head angle and a short head tube length.

How was the bike in terms of height and reach? How did it compare to other bikes of the same stated size?

The stack and reach figures are pretty typical for this size and kind of bike. This 56cm comes with a stack of 563mm and a reach of 391mm.

Riding the bike

Was the bike comfortable to ride? Tell us how you felt about the ride quality.

Overall it's fine, although it does have a firmer ride than a lot of new carbon fibre frames.

Did the bike feel stiff in the right places? Did any part of the bike feel too stiff or too flexible?

Stiffness is very impressive, especially around the bottom bracket area.

How did the bike transfer power? Did it feel efficient?

Efficiency is very impressive, it is a proper point and shoot bike.

Was there any toe-clip overlap with the front wheel? If so was it a problem?

How would you describe the steering? Was it lively neutral or unresponsive? Responsive.

Tell us some more about the handling. How did the bike feel overall? Did it do particular things well or badly?

The handling is very well balanced, making the Trek easy to ride whether you are just cruising along or pushing it hard through the bends.

Which components had the most effect (good or bad) on the bike's comfort? would you recommend any changes?

I liked the saddle, it was firm yet comfortable for all sorts of rides.

Which components had the most effect (good or bad) on the bike's stiffness? would you recommend any changes?

The Bontrager wheels offer loads of stiffness even when riding hard, out of the saddle.

Which components had the most effect (good or bad) on the bike's efficiency? would you recommend any changes?

I'd change the tyres for something a little more supple which would help you achieve higher speeds in the bends.

The drivetrain

Tell us some more about the drivetrain. Anything you particularly did or didn't like? Any components which didn't work well together?

The Shimano Ultegra groupset can't really be faulted. Gears and brakes offer great performance and reliability.

Tell us some more about the wheels.Did they work well in the conditions you encountered? Would you change the wheels? If so what for?

It's good to see a quality set of carbon wheels on a bike as standard at this price. They performed well in all sorts of conditions and seem to be durable.

Tell us some more about the tyres. Did they work well in the conditions you encountered? Would you change the tyres? If so what for?

The Bontrager R2s aren't bad, but the SL 6 Pro deserves something faster and grippier.

Tell us some more about the controls. Any particularly good or bad components? How would the controls work for larger or smaller riders?

Decent quality in-house kit that suits the bike well.

Your summary

Did you enjoy riding the bike? Yes

Would you consider buying the bike? Yes

Would you recommend the bike to a friend? Yes

How does the price compare to that of similar bikes in the market, including ones recently tested on road.cc?

For a semi-aero bike the Émonda is pretty well priced, like against the Scott and Orro mentioned in the review.

Use this box to explain your overall score

The Émonda's new aero frameset means that not only is it a good climber, it also works well on the flat sections too. The overall quality is very good and you are getting a well chosen spec. The firm ride might not be ideal for those who focus more on comfort, though.

Overall rating: 8 /10

About the tester

Age: 41   Height: 180cm   Weight: 76kg

I usually ride: This month's test bike   My best bike is: B'Twin Ultra CF draped in the latest bling test components

I've been riding for: Over 20 years   I ride: Every day   I would class myself as: Expert

I regularly do the following types of riding: time trialling, commuting, club rides, sportives, fixed/singlespeed,

Help us to fund our site

We’ve noticed you’re using an ad blocker. If you like road.cc, but you don’t like ads, please consider subscribing to the site to support us directly. As a subscriber you can read road.cc ad-free, from as little as £1.99. 

If you don’t want to subscribe, please turn your ad blocker off. The revenue from adverts helps to fund our site.

Help us to bring you the best cycling content

If you’ve enjoyed this article, then please consider subscribing to road.cc from as little as £1.99. Our mission is to bring you all the news that’s relevant to you as a cyclist, independent reviews, impartial buying advice and more. Your subscription will help us to do more.

As part of the tech team here at F-At Digital, senior product reviewer Stu spends the majority of his time writing in-depth reviews for road.cc, off-road.cc and ebiketips using the knowledge gained from testing over 1,500 pieces of kit (plus 100's of bikes) since starting out as a freelancer back in 2009. After first throwing his leg over a race bike back in 2000, Stu's ridden more than 170,000 miles on road, time-trial, track, and gravel bikes, and while he's put his racing days behind him, he still likes to smash the pedals rather than take things easy. With a background in design and engineering, he has an obsession with how things are developed and manufactured, has a borderline fetish for handbuilt metal frames and finds a rim braked road bike very aesthetically pleasing!

Add new comment

Quote: The Émonda has always been the lightweight bike of Trek's road range

8.23kg isn't 'lightweight'... that's porky. 1.4kg over the UCI minimum!

• Log in or register to post comments

Not a big fan of the way the cables and hoses run at the front of the bar in order to fit under the stem like that, I'm surprised they haven't gone for a system where they run intrnally then under a stem cover etc

Quite a lot of money for an 8.2 kilo bike. 

"Comparing the price of the near-identical SL 6 suggests you are getting them for just £450 too."

The side by side comparison of the SL6 and the pro makes them identical bar the wheels. Which listed on the trek website retail at a price difference of £250, not £450. So either the stock wheels on the SL6 are over priced on their own (then maybe the bike is too) or the only reason to buy the pro is if the Aeolus are the wheel upgrade you want over everything else on the market.

I'm still more inclined to the RC30.

Latest Comments

It looks a lot less ugly than the previous version, thankfully. Perhaps they've had hints of thought towards aesthetics.

Even though this "law" is quite ridiculous, I would suggest a sense of proportionality be applied....

Talented but pointless (no pun intended). With art like this you could have just taken a photo. It's like asking all pro riders to ride on the...

£115 per litre sounds expensive, though if an application lasts twice as long as Green Oil then that is worthwhile (in practical terms as well as...

The descriptions of articles from China are often inaccurate due to translation. They're not going to be made from natural rubber, they will be...

Lest we forget

Local papers is a bit of a misnomer: most of them don't even have local offices eg IIRC there's one desk which covers everything south of...

Laurent Fignon died 14 years ago, I doubt he ever compared Pogacar to anything or -one.

What's a good camera that is not expensive for recording motorists behaviour for a cyclists safety?

Related Reviews

Orbea Orca Aero M10iLTD 2024

Stunningly fast without sacrificing versatility, handling or comfort

Boardman SLR 8.6

Comfortable, lively ride, an excellent gear range and well-chosen components – one of the best entry-level bikes you can buy

Fara F/Road

Quick, nimble, fun, an impressive ride quality and excellent comfort – and I think it looks stunning

Factor O2 VAM

A master of climbing – but a bike that's also incredible fun and extremely capable everywhere else

• Forum Listing
• Marketplace
• Advanced Search
• Classic Forums
• Bikes, Frames and Forks

Emonda seat post

• Add to quote

I have a Trek Emonda. Recently I've decided to move my seat down a bit, because I don't think I am getting the power I should be getting and the reading I've done suggests it may be that my seat is to high for my inseam. In trying to lower the seat, I find that it can't be any lower than it is, because it is already bottomed out. The male end (which is part of the frame) has printed on it, "Do Not Cut". There is no such printing on the female end that the saddle is attached to. The end of the post has two opposing vertical cuts in it that the tightening clasp goes around. Can I safely take an inch off of this portion of the post without causing damage, and if I do make a cut, should I try to duplicate the vertical cuts on the end that I just cut?  

If you cut it off, check to see if the seat will bottom out near where it is now, or will it sink in. If it is a metal seat post, I would say you would be ok with your plan. If it is carbon, I'll defer to someone who has experience with this unit. Engineering wise you are reducing load. What if you want to raise it back up?  

Do not cut a Trek Emonda seat mast cap. There are 2 different lengths. Maybe you have the longer one and can replace it with the shorter one. Trek has 135mm and 175mm seat mast caps  

OP, you already posted this in GD, don't cross post in more than one section.  

I don't understand how cutting a seat mast (the part that attaches to the saddle) will enable a lower seat height-isn't the frame's mast bottoming out on the existing piece? Won't it just do the same if you cut it? What is it I don't understand?  

Peter P I guess it depends if the seat mast cap is bottoming out on the frame or if the frames seat tube is bottoming out on the seat mast  

@ruthlessrider Hello I saw your post regarding the seat height . I have the exact same issue for my emonda. I searched online and am wondering if your idea of cutting 1 inch from the carbon post and the saddle seat post ever worked? Or did you find a solution?  

Ruthlessrider Did your idea work or found a solution ? I have the same issue  

This is a two year old thread by a guy that posted the same topic twice in two different areas, never posted again and of course got shit on by CX for his audacity. He ain't gonna answer.  

thanks for pointing. for anyone having the same issue, fyi the suggested solution does work. You would need to find a carbon fibre specialist in your local area able and willing to do the service. i got mine done and am happy with it.  

• ?            
• 205.3K members

Top Contributors this Month

Gear-obsessed editors choose every product we review. We may earn commission if you buy from a link. How we test gear.

The New Trek Émonda Is Faster Than Ever

Already one of the fiercest climbing bikes available, the new Émonda is even faster thanks to a dose of aero.

The Takeaway: The Émonda SLR is a benchmark pro race bike—and it’s surprisingly rider friendly.

• It has 183 grams less drag than the previous generation, but the frame is only 33 grams heavier
• There are 10 models starting at $2,699
• SL models ($2,699 to $5,999) have the aerodynamic shaping and features but in a frame that’s about 400 grams heavier than the SLR
• SLR models ($6,699 and up) use a new carbon fiber composite that’s 30 percent stronger than Trek’s previous top-of-the-line carbon.

For Émonda SLR bicycles, Trek will provide an individual handlebar and stem until an updated handlebar/stem combo is available.

Additionally, all customers who bring in their handlebars for replacement will also receive a $100 in-store credit that can be used toward any Trek or Bontrager merchandise through December 31, 2022.

Remember professional road racing ? It’s that thing where super skinny people go unbelievably fast up and down hills and fly over flat roads for hours at a time. It’s been a while since the pros have beat up on each other for our entertainment, but there might, hopefully, be some races on the horizon. When the races do resume, Trek’s pro riders will be aboard its new third-generation Émonda climbing bike. The new Émonda isn’t lighter, but it is faster thanks to a dose of aerodynamic tuning.

.css-1hhr1pq{text-align:center;font-size:1.1875rem;line-height:1.6;font-family:Charter,Charter-roboto,Charter-local,Georgia,Times,Serif;}.css-1hhr1pq em{font-style:italic;font-family:Charter,Charter-styleitalic-roboto,Charter-styleitalic-local,Georgia,Times,Serif;}.css-1hhr1pq strong{font-family:Charter,Charter-weightbold-roboto,Charter-weightbold-local,Georgia,Times,Serif;font-weight:bold;} —Five Cool Details—

Now With Aero

The new Émonda gets a major drag reduction with a tiny weight gain.

Simple Seat Mast

The seat mast has lots of adjustment range, and an easy-to-use saddle clamp.

Light and Slippery

The new Bontrager Aeolus RSL 37 wheels are light, sleek, and stable.

Wide and Threaded

The T47 bottom bracket has a wide stance, and user-friendly threads.

A built-in chain watcher prevents unwanted derailments.

Making the new Émonda frame more aerodynamic wasn’t exactly a tough hurdle as the previous Émonda had virtually zero aerodynamic optimization. But adding meaningful aerodynamic benefit while achieving the frame stiffness expected of a pro-caliber race bike, maintaining the well-regarded handling properties of the previous Émonda, and adding rider-friendly features like a threaded bottom bracket—all with adding only 33 grams (SLR frame, claimed)—is quite a feat.

Below you’ll find my review of the Émonda SLR—I’ve been on it since early March—followed by a dive into the technology and features of the new bike, and a brief model breakdown.

Ride Impressions: Émonda SLR 9 eTap

The Émonda SLR is a tool made to fulfill the needs of some of the world’s best road racers. This bike will never be as comfortable or versatile as a gravel bike. Going fast on pavement and climbing performance are its only goals. These are obvious facts, but that’s the lens through which it must be viewed. And through this lens, it is one of the very best.

The new Émonda was born out of a request from Trek’s pro racers and pitched as the company’s “fastest climbing bike ever.” So little surprise they set me up with the lightest model (the SLR 9 with SRAM Red eTap ), which also has a build kit almost identical to the team’s bikes. It’s also, excepting customized Project One builds, the most expensive model at a buck under 12 grand.

That massive pile of clams gets you an aerodynamic frame with disc brakes, power meter, and wireless electronic shifting that weighs less than 15 pounds (54cm). And that’s with a hefty T47 threaded bottom bracket unit, lustrous paint , clincher wheelset, a chain-watcher, standard butyl tubes, 37mm deep rims, 160mm disc rotors front and rear, and SRAM’s largest Red cassette (10-33). That’s “Holy shit!” impressive.

By cutting drag a ton without adding much weight, it’s hard to argue with Trek’s claim that the new Émonda is faster than the outgoing generation. But if you have any doubts, they’ll be erased when you ride it. This is an explosive bike: it feels as light as a feather and as solid as a steel girder at the same time.

Trek’s Émonda has always been a raw and rowdy bike that feels a little wild and a bit dangerous in precisely the ways you want a race bike to feel: That’s not lost with the added aerodynamics. If anything, the new Émonda is even crisper and punchier than before, which is saying something.

A small downside to all this fury is the Émonda’s smoothness. Light and stiff race bikes aren’t a smooth-riding lot to begin with, but even measured against a stiffer riding genre, the new Émonda is on the firmer end of the scale. Still, it escapes harsh or punishing labels—I did a six-hour ride on the Émonda on the stock 25 tires and didn’t feel worn down by its ride. Swapping to 28s helped a lot (no surprise) and were on the Émonda for the bulk of my testing. I’d suggest reserving the lighter and more aerodynamic stock 25s for racing or PR attempts—assuming good roads—and use 28s as daily drivers.

The Émonda’s handling is excellent. Well, let me caveat that: Road racing geometry is pretty uniform, so whether I’m on a current race bike from Trek, Specialized, Cannondale, Cervélo, Canyon, Colnago, Wilier, Pinarello, BMC, Giant (etc., etc.), I find the broad strokes of their handling feel and performance quite similar. There wasn’t anything about the Émonda’s handling or cornering performance that set any new benchmarks for me, but there wasn’t anything to dislike either.

It was quick and accurate, diving into corners with a light touch. It offered great feedback, so I always knew where I was relative to its and my limits, and I could count on it to be consistent and predictable. It was maybe a touch less settled in bumpy corners than the Specialized Tarmac, but the Émonda never broke traction or skipped. Overall, for such a light bike, the Émonda is remarkably solid and drama free. I’d have no qualms barreling down a technical alpine descent on the Émonda.

I received this test bike in early March, giving me plenty of time to ride it back to back with its primary competition—a Specialized S-Works Tarmac , what I consider the benchmark for aero-ized lightweight bikes. The Tarmac is smoother over the bumps and has a silkier feel overall, but the new Émonda feels more efficient, like it can go faster more easily.

I’ve also ridden a good slice of the Émonda’s competition, including the Canyon Ultimate CF SLX , Colnago V3Rs, Cannondale SuperSix Evo , Cervélo R5, Wilier Zero SLR , Pinarello Dogma F12 . These are all superb bikes, but I feel the Émonda is the class leader. It feels sharper and more explosive than all of them. It feels faster, and that’s what matters most in a race bike. But I also like that the Émonda is pretty straightforward and rider-friendly.

For example, I swapped the stock one-piece bar/stem for a standard stem and round bar. One, I could run a standard bar and stem on this bike, which you can’t say about every modern race bike. And two, I didn’t have to pull any cables, wires, or hoses to make the swap: Again, something you can’t say about all race bikes. For the record, the shape of the one-piece Aeolus bar/stem is great, and the tops are the most comfortable to grab of all the aero-topped bars I've used. The only reason I swapped is my preferred length and width combination (110x40) wasn't available yet.

The BB is threaded, which makes it easier to service and replace than a press-fit (however, I was getting some noise out of the BB area, which I never resolved). The wheels employ standard offset, and it uses regular thru-axles. It’s compatible with pod-style power meters and mechanical shifting. Its signature seat mast is pretty much the only non-standard thing about this frame, and even then, it’s pretty user-friendly. There’s no cutting necessary, height adjustment is ample, the saddle clamp is easy to use, and it’s travel-case friendly.

I expect so much from a modern high-end pro-level road racing bike that it’s hard to exceed those expectations. It’s rare when a bike does: The Émonda SLR is one of those rare bikes.

Team Request

The new Émonda is partially a result of a request from the Trek-Segafredo race team. “They are one of our primary customers,” said Jordan Roessingh, Trek’s director of road product. “And they started to realize that it’s not just weight, it’s not just stiffness and responsiveness, there’s this other thing—aerodynamics and speed—that’s also really important to be competitive and be faster on the bike. They had been one of the loudest voices saying, ‘We need the lightest-weight, stiffest bike possible.’ And now they started coming back saying ‘We need those things, but we also need the bike to be faster in order for us to be really competitive.’ ”

It is (comparatively) easy to make a light frame, it is easy to make a stiff frame, it is easy to make an aerodynamic frame. Making a frame that’s two of those three things is more challenging: Making a bike more aerodynamic usually makes it heavier, making a bike lighter typically makes it less stiff, etc. Making a frame that is light AND stiff AND aerodynamic enough to satisfy the demands of a top-level professional race team is extremely difficult.

But not impossible. Many brands already make a light, stiff, and aero bike. The Specialized Tarmac is one, as are the Canyon Ultimate, the Cannondale SuperSix Evo, the Cervélo R5, the Wilier Zero SLR, the Pinarello F12, the Scott Addict, and the new Giant TCR . All of them seek to balance the three qualities—light, stiff, and aero—in the pursuit of the ideal race bike, and they all manage the balance differently. The common thread between these bikes: They’re all used by teams that compete against Trek-Segafredo.

Still Light, Now With Aero

The previous generation Émonda SLR Disc , launched in 2017, was an extremely light frame at 665 grams (claimed). But when a frame is already that light, it is much harder to make it even lighter. At least lighter enough to make a meaningful difference.

So, Trek took a different approach to making its climbing bike faster—instead of lighter, it made it more aerodynamic. The new Émonda frame is a touch heavier—yet still extremely light at 698 grams—but the bike has 183 grams less drag than the previous generation.

The important thing to note here is that, though the frame is more aerodynamic, the 183 gram drag reduction is not from the frame only. New wheels and a new aero bar (more info on both below) play a role. The specific setups Trek used to get that 183 gram number are: 2018 Émonda with 28mm-deep Bontrager XXX 2 wheels, and Bontrager XXX Bar/Stem Combo compared to the 2021 Émonda with 37mm deep Bontrager Aeolus RSL 37 Wheels and Bontrager Aeolus RSL Bar/Stem Combo.

Another drag saving upgrade: the housing, hoses and wires for the controls are almost fully inside the frame. They dive into the frame at the head tube passing through the upper headset bearing. The front brake hose runs into the fork steerer and down the left leg before popping out just above the brake caliper. The fork steerer’s flattened sides provide room for the rear brake hose and derailleur control lines to travel down and into the frame. Though it has flattened sides, the fork steerer is still compatible with standard 1 1/8” stems.

The overall drag reduction results in a bike that is 18 seconds per hour faster when climbing an 8.1 percent grade (the average grade of Alpe d’Huez ), and 60 seconds per hour faster on flat roads than the previous Émonda. Trek also claims the new Émonda is 13 seconds per hour faster than a Specialized Tarmac when climbing an 8.1 percent grade (all assuming the rider maintains a constant 350 watts).

Eight Point One Percent

With three qualities—aero, stiffness, weight—that work in opposition to each other, how do you decide how much to optimize one quality when you know it will negatively affect the other two? How aero is aero enough? At what point is improved aerodynamics offset by the weight added to get there?

The team behind the Émonda used a legendary climb to help them decide: Alpe d’Huez. “It represents an extreme example of what most people see on a regular basis when they’re doing a big climbing ride,” said Roessingh, “It’s around an 8 percent grade, and it’s about an hour-long climb for the pros—amateurs might go a little slower. It gives us a good understanding of what the benefit of a drag savings is relative to a weight savings.”

By optimizing the weight and aerodynamic balance around this climb, Roessingh claims the Émonda is faster on Alpe d’Huez and also faster on everything shallower than the famous climb, “which is the vast majority of the environments that most riders are going to ride in, including the team,” said Roessingh. “So if we can say it’s faster up Alpe d’Huez, it’s going to be significantly faster everywhere because the flatter it is, the more aerodynamics benefit you.”

Computer-Aided Optimization

Achieving the weight to the aerodynamic balance of the new Émonda required careful design of each tube shape. Aiding the Émonda’s team was supercomputing horsepower. The abridged and simplified version of the process goes like this: into the computer was fed a rough draft of the shape based on Trek’s aerodynamic experience and other information like UCI regulations. The program then varies the tube’s parameters within a predefined range and spit back several iterations of the shape, each with a different weight to aerodynamic balance. The Émonda’s team evaluated the alternatives and picked the one most suited to its location in the frame and best able to help the frame achieve its overarching goal.

Roessingh says that Trek cannot afford to buy the computing hardware necessary to run the CFD and FEA optimizations (in a timely manner) that helped shape the new Émonda’s tubes. The processing happens in the cloud where Trek rents time on Google, Microsoft, or Amazon’s supercomputers. It’s more affordable than buying a supercomputer. Even so, it is not cheap, “Cloud computing is becoming a relatively significant budget line item for us because we’re doing so many of these optimizations in CFD and FEA and all that processing happens in the cloud.”

The new Émonda’s fork legs, head tube, down tube, seat tube, and seat stays all use a variation of a truncated airfoil. The top tube and chainstays, which have virtually no effect on drag, are optimized almost entirely for stiffness to weight.

In Trek’s line, the new Émonda’s aerodynamic performance is equal to the third generation Domane ; the Madone is still significantly more aero. But while the more aerodynamic Madone is faster in flatter terrain, once the climb hits about 5.5 percent, the lighter Émonda becomes the faster bike. And for many of the Trek-Segafredo team riders—and many amateurs—that means the Émonda is fastest when it matters most: the hardest part of a race or ride, which is almost always on a steep climb.

OCLV 800 Carbon

Getting the new Émonda SLR to be as light as it is while adding aerodynamic shaping would not be possible without employing a new carbon-fiber composite, said Roessingh. The new OCLV 800 composite is 30 percent stronger than Trek’s previous top-of-the-line composite (OCLV 700). Because it is stronger, they can use less: By using OCLV 800, Trek’s team was able to make the Émonda SLR frame 60 grams lighter than if they used OCLV 700.

The Émonda SLR is very cool, but it’s also very expensive (bike prices start at $6,699). For the 99 percenters, there’s the Émonda SL (models start at $2,699).

The SL uses OCLV 500 composite, and the frame is quite a bit heavier than the SLR’s. The SL’s frame comes in at 1,142 grams, with a 380-gram fork (SLR fork weight: 365 grams).

But material (and weight) are the only difference between the SL and SLR.

Aeolus Bar Stem

While a ton of work made the Émonda’s frame tubes faster, a big chunk of the new bike’s drag savings comes from the one-piece Aeolus bar stem. It alone is responsible for 70 grams of the Émonda’s 183-gram drag reduction. This means that if a traditional stem and round bar are installed on the new Émonda, its drag advantage over the previous-generation bike drops to 113 grams. And it means that you can make any bike with a round bar and traditional stem significantly more aerodynamic by merely installing the Aeolus. Retail price is $650.

The integrated Aeolus is made of carbon-fiber composite, of course, with a claimed weight of 297 grams (42x120). It’s offered in 14 length and width combinations, from 44x120 to 38x80. Hoses, housing, and wires run externally for easier service and repairs, but in a groove that keeps them out of the wind. A bolt-on plate keeps the control lines tucked and organized where they turn off the bar tops to run in line with the stem.

The Aeolus employs a mount that works with Bontrager’s line of Blendr accessories for mounting computers and lights.

Aeolus 37 Wheels

Another new Bontrager product rolling out with the Émonda is the Aeolus 37 wheelset. It comes in two models: the Aeolus RSL 37 (1,325 grams/pair, $2,400) and the Aeolus Pro 37 (1,505 grams/pair, $1,300).

The RSL 37 is claimed to be lighter than Zipp’s 32mm-deep 202, yet more aerodynamic and more stable than Zipp’s 45mm-deep 303. Both wheels are disc brake only (only Center Lock interface), tubeless compatible, use DT-Swiss internals, have no rider weight limit, and come with a lifetime warranty.

Surprisingly Rider Friendly

Though the new Émonda is clean and integrated looking and uses high-performance standards, it is also remarkably rider-friendly. Cables, hoses, and housing run externally on the one-piece Aeolus bar/stem for easier repair and service (with one exception: wiring for a Shimano Di2 or Campagnolo EPS bar-end junction box runs partially inside the bar). If you prefer a more traditional cockpit, it can be run with a standard bar and stem with 1⅛-inch steerer clamp.

The bottom bracket uses the threaded T47 standard , which is compatible with almost all common crank-axle standards.

Front and rear thru-axles are standard 12x100 and 12x142mm, and the wheels employ a standard dish. The standard flat mounts for the brake calipers are compatible with 140, 160, or 180mm rotors.

Tire clearance is officially 28mm, but that’s with a ton of extra space. I fit 32mm tires in the Émonda with ease.

And though all models do use a seat mast, it’s a no-cut variety with lots of adjustment range.

H1.5 Geometry

Trek did offer its top-of-the-line race bikes in the aggressive H1 geometry for riders seeking an ultra-long and low geometry, or H2 which was an endurance fit. The new Émonda is offered only in H1.5, which splits the difference between H1 and H2. The result is pretty typical dimensions for a modern race bike—a 54cm Émonda H1’s geometry is remarkably similar to a 54cm Specialized Tarmac.

There are eight sizes starting at 47cm and topping out at 62cm.

There are 10 models of the new Émonda. SL models start at $2,699 and are priced up to $5,999. SLR models start at $6,699 and go up to $11,999.

Only SLR models come with the Aeolus integrated bar/stem stock; and only the Émonda SL 7 ($5,499) and up come with the Aeolus 37 wheelset.

The new Émonda is a disc brake-only platform.

Project One

The new Émonda is in Trek’s Project One paint and parts personalization program. If that’s not luxe enough for you, Trek’s Project One Ultimate program allows you to work with a designer to come up with a one-of-a-kind finish, and Trek will source any parts you want for your new bike.

Trek Émonda SLR 9 eTap

A gear editor for his entire career, Matt’s journey to becoming a leading cycling tech journalist started in 1995, and he’s been at it ever since; likely riding more cycling equipment than anyone on the planet along the way. Previous to his time with Bicycling , Matt worked in bike shops as a service manager, mechanic, and sales person. Based in Durango, Colorado, he enjoys riding and testing any and all kinds of bikes, so you’re just as likely to see him on a road bike dressed in Lycra at a Tuesday night worlds ride as you are to find him dressed in a full face helmet and pads riding a bike park on an enduro bike. He doesn’t race often, but he’s game for anything; having entered road races, criteriums, trials competitions, dual slalom, downhill races, enduros, stage races, short track, time trials, and gran fondos. Next up on his to-do list: a multi day bikepacking trip, and an e-bike race. 

.css-1t6om3g:before{width:1.75rem;height:1.75rem;margin:0 0.625rem -0.125rem 0;content:'';display:inline-block;-webkit-background-size:1.25rem;background-size:1.25rem;background-color:#F8D811;color:#000;background-repeat:no-repeat;-webkit-background-position:center;background-position:center;}.loaded .css-1t6om3g:before{background-image:url(/_assets/design-tokens/bicycling/static/images/chevron-design-element.c42d609.svg);} Bike Reviews

The Best Beach Cruisers for Leisurely Rides

The Best Hardtail Mountain Bikes

Best Hybrid Bikes You Can Buy Right Now

The 14 Best Road Bikes of 2024

The Best Commuter Bikes for Getting Around Town

The 10 Best Electric Bikes, Tested by Our Editors

These Folding Bikes Can Go Everywhere

Smoother and Faster: The New Pivot Switchblade

The Best Beginner Mountain Bikes

Reviewed: Colnago's Italian Made C68 Gravel

The 6 Best Kids’ Bikes in 2024

• Rider Notes

2022 Trek Émonda SL 6 Disc

A carbon frame race bike with high-end components and hydraulic disc brakes.

Manufacturer Price

For This Bike

View more similar bikes →

Based on frame geometry and build specs.

A bike with lower gearing will be easier to ride up steep hills, while a higher top end means it will pedal faster down hills.

Émonda SL 6 Disc

Similar Bikes

(descending)

Add custom gearing

Based on build material and quality level of the frame, fork, wheelset, groupset, suspension system, and more.

5'4" – 5'7"

Do you have this bike? Help other riders make a decision about which size will work for them by sharing your own size and fit notes. Report your fit

Nov 2023 · Charlotte Head

Hill climbers push their bikes to the extreme and this Trek Émonda is the perfect example, slimmed down to an

Read Review

Oct 2022 · Warren Rossiter

A climb-friendly bike with aero styling

Snappy handling

Fast to respond through the pedals

Power meter included in a fine package

Faster tyres would enhance its ride further

Already one of the fiercest climbing bikes available, the new Émonda is even faster thanks to a dose of aero.

Light and aerodynamic

Easy to service

Proper race bike feel and handling

Apr 2022 · Stu Kerton

The Émonda is a classic all-rounder, fun, fast and stiff, although this model isn't the lightest

Internal cable routing gives a very clean look

A great all-rounder

Good finishing kit

Not exactly light

Aug 2020 · James Bracey

Trek's latest GC/climbing bike has undergone an aero transformation, but has it helped?

Efficient power transfer

Excellent handling prowess

Compliant ride

New SL frame has lost some of the excitement of the existing Émonda

Heavy for a 'climbing' bike

Jul 2020 · Dan Cavallari

OCLV 800 launched with Trek's feathery Émonda, but now the brand's flagship aero bike gets this lighter, stiffer carbon — along with a T47 BB.

Have you seen Bontrager’s new Aeolus carbon wheel lineup? Spanning the gap between budget and race ready, the aerodynamic hoops are the perfect complement to another new Trek product launching today – the all new Émonda. Fans of super light, efficient climbing bikes needn’t worry. The Émonda is still as light as ever, but now […]

Jun 2020 · Benjamin Topf

With Trek's completely revised 2021 Émonda SLR 9 eTap, the American brand's lightest frame goes into the 3rd generation. Have Trek managed to design an aerodynamic climbing specialist that performs just as well on flat terrain? How does it compare to the Madone? Our first ride review includes everything you need to know about the brand new bike!

Light-footedness and speed in every situation

High precision

Race-level stiffness when attacking

Coherent overall concept

Tidy look with excellent attention to detail

Race-level stiffness all the time

Last updated April 28

Trek seat mast cap

smithy21 wrote: He's right you know.

shiznit76 wrote: It is right size, comes in the aluminium SL5 version, just wanted make sure there would be no issue with aluminium cap and carbon post coming from frame

shiznit76 wrote: D 'oh this sounds such a stupid question now, Cheers for info

• All Categories
• 18.2K BikeRadar team
• 183.7K Road cycling forum
• 137.2K Mountain biking forum
• 28K Commuter cycling forum
• 1.3K Family & kids cycling forum
• 2.9K Stolen & found bikes
• 9.4K Buy & sell

Site footer

• Facebook White
• Terms & conditions
• Privacy policy
• Cookies policy
• Manage Privacy Settings

Trek Emonda SL6 Pro review

Trek's latest GC/climbing bike has undergone an aero transformation, but has it helped?

• Sign up to our newsletter Newsletter

The radical changes brought about in this new Emonda frame are somewhat hampered within the SL range owing to the heavier nature of the frame and subsequent ride quality of the 500 Series OCLV carbon. It is a solid all-round performer and there's no getting away from the fact the ride quality provides a good balance of efficiency and ride comfort. It's just if you were looking for an improvement on the ride of the previous model you'll need to hold off and get one of the higher level SLR models to truly see improvements.

Efficient power transfer

Excellent handling prowess

Compliant ride

New SL frame has lost some of the excitement of the existing Émonda

Heavy for a 'climbing' bike

You can trust Cycling Weekly. Our team of experts put in hard miles testing cycling tech and will always share honest, unbiased advice to help you choose. Find out more about how we test.

Trek recently released a brand new re-imagining of the Emonda, the brand's lightweight climbing/GC model platform, featuring a drastically aero-ised chasis. The model family is split into a higher tier SLR and the lower SL range that this SL6 Pro sits in, the critical difference is in the carbon layup and the enhanced integration sported by the SLR range.

The frame on the Emonda SL6 Pro is constructed of Trek's own 500 Series OCLV carbon fibre. This carbon layup might be heavier than the newly showcased ultra light 800 Series OCLV of the top level SLR Émonda's but is considerably more economical to produce, helping keep the SL range prices in a much more affordable tier.

>>> The Trek Madone gets an update, but you won't spot it

The new Emonda features a completely new set of tube shapes, most of which have gone down the aero route. But Trek is at pains to keep the comparisons to the Madone aero race bike to a minimum; this isn’t simple a ‘Madone Lite’. Rather than being the same elongated shapes as found on a proper aero race bike, the aero shaping of the Emonda’s tubes is much more subtle and is based around the principle of unsteady aerodynamics.

>>> Best road bikes reviewed

In this case it’s more about how drag is affected through wind gusts and other factors at slower speeds than the usual 45km/h, after all, not even pros climb at these speeds. There are still the characteristic truncated airfoil shapes that we associate with aero frames but the effect is far less dramatic and produces a frame that still has a traditional look.

Trek Madone SLR9 Disc review

Trek hasn’t jumped on the dropped seatstay bandwagon with the new frame either, preferring to stick to a set of widely spaced yet aero shaped, thin seat stays.

The new frame also enjoys a little more integration, bringing it more in-line with the Madone. All models now see the cable routing brought neatly into the frame at the front of the headtube keeping the front end profile as slippery as possible.

The other notable feature of the new frame is a wholesale move to the T47 bottom bracket standard . This style marries the reliability of a threaded shell with the capability of running larger diameter internal bearings and enables Trek to maintain its characteristic wide and efficient bottom bracket stance.

The new Emonda range has also been designed with Trek’s middle-ground H1.5 geometry ensuring a set of numbers that sits it half way between the ultra-aggressive pro H1 and its laid back and relaxed, endurance specific H2 geometry. A tall stack of split spacers under the stem provides plenty of height adjustment for a wide range of rider requirements.

And finally, keeping the Emonda in a pretty rigid user set Trek has bucked another trend and limited tyre clearance to just 28c putting the focus of the bike purely on road going high performance.

The SL6 Pro sits near the top of the SL range and as such has a a pretty decent spec sheet. A mechanical Shimano Ultegra is the least we would expect at the +£3,000 price point and we don't need to point out how reliable and consistent it is in providing smooth shifting and braking.

As with the entire Emonda range the SL6 Pro runs on Bontrager wheels; Aeolus Elite 35 to be precise. These feature a carbon 35mm depth and complement the new 'aero' frame without compromising too much on weight and climbing ability. They feel stiff under power and spin up to speed relatively quickly. There are lighter and faster wheels that would suit the new frame but at this price point the Aeolus Elite is spot on. The tyres are Bontrager as well, in this instance 25mm R2 Hardcase Lite tyres. These are not Bontrager's fastest tyres, more classed as an everyday tyre with plenty of puncture protection.

In a complete whitewash the entirety of the finishing kit is also provided by Bontrager. Unlike the integrated carbon bar/stem of the higher end SLR models, the SL6 Pro is fitted with a standard aluminium handlebar and separate stem, allowing for much simpler cockpit customisation. Despite the more ordinary setup the cable routing is still really neat underneath the stem without needing any additional housing.

The Émonda maintains the 'reversed' seat post, with a larger diameter seatpost mast fitted over the seat tube. This allows for plenty of adjustment plus further lengths are available if needed. The Bontrager Aeolus saddle also stands out for being incredibly comfortable even when sat right on the nose.

I was curious to see if the new Emonda was able to improve on the ride quality of the highly rated existing version and the short answer is yes, well kind of....

The first thing to note is that in this new guise, the lower SL version I have on test feels a little chunky at over 8 kilograms - not something you expect when the bike's raison d'etre is all about low weight and climbing. However a total mass doesn't always equate to an anchor of a ride experience and this is true of the Émonda.

Trek has managed to provide a level of stiffness around the bottom bracket that enables the Émonda to deliver in its promise of rewarding effort. Granted it takes less effort to maintain speeds on flat and rolling terrain, much like the Madone aero bike, and I'm certain it is a 'faster' bike than the last version. But I can't help but feel that this new design has stifled some of the existing model's lively and exciting ride nature - it feels like using adjectives such as solid and dependable is more appropriate, almost like the Domane endurance bike.

Trek's relaxing of the geometry on the Emonda has increased its ability to keep you comfortable and riding hard on a long ride and I had no issue taking on some challenging and long routes around Dorset and South Wales. The tall stack of shaped and split spacers sit the cockpit a little too high for my personal preference but luckily I was able to drop the stem height by using some standard spacers on top of the stem, without needing to cut the steerer. This put a little more weight on the front wheel which enabled me to descend the Émonda with aplomb and happily stuff it into downhill corners at high speed without any of the vague feeling that can come with a front end that is a touch too high.

Climbing is where the Emonda should thrive and it certainly is no slouch on your typical British climb, however it doesn't set the tarmac alight and the near eight kilo weight does neuter the Émonda's ability to counter attack when your riding mates try to accelerate away from you on a climb.

It feels like I'm being a little harsh and critical of the Emonda SL6 Pro, after all in most respects it is a solid all-rounder and I have enjoyed my time riding the bike over the last few months. It's a great looking bike and I expect most riders will be satisfied with the performance, it's just I feel it has a lost a little of the magic the old version had. If you are looking for the sort of engaging ride the Emonda is known for I suspect you would need to save your pennies and opt for one of the lighter SLR options and certainly if it was my money that would be what I would need to do.

Thank you for reading 20 articles this month* Join now for unlimited access

Enjoy your first month for just £1 / $1 / €1

*Read 5 free articles per month without a subscription

Join now for unlimited access

Try first month for just £1 / $1 / €1

Get The Leadout Newsletter

The latest race content, interviews, features, reviews and expert buying guides, direct to your inbox!

James Bracey's career has seen him move from geography teacher, to MBR writer, to Cycling Weekly's senior tech writer and video presenter. He possesses an in-depth knowledge of bicycle mechanics, as well as bike fit and coaching qualifications. Bracey enjoys all manner of cycling, from road to gravel and mountain biking.

German champion Emanuel Buchmann says he was promised "co-leadership" of Bora team, but he has not been picked

By Tom Thewlis Published 29 April 24

Canadian takes win as Blanka Kata Vas moves into race lead

By Adam Becket Published 29 April 24

British Cycling reveal the bike that it hopes will power riders to medals in Paris this summer

Useful links

• Tour de France
• Giro d'Italia
• Vuelta a España

Buyer's Guides

• Best road bikes
• Best gravel bikes
• Best smart turbo trainers
• Best cycling computers
• Editor's Choice
• Bike Reviews
• Component Reviews
• Clothing Reviews
• Contact Future's experts
• Terms and conditions
• Privacy policy
• Cookies policy
• Advertise with us

Cycling Weekly is part of Future plc, an international media group and leading digital publisher. Visit our corporate site . © Future Publishing Limited Quay House, The Ambury, Bath BA1 1UA. All rights reserved. England and Wales company registration number 2008885.

Trek seat mast - can’t adjust seat angle

@mcneese.chad I know you work for a Trek shop, any thoughts to share?

Those are a cone connection, and can bind up a bit. Take a flat blade screwdriver thru one side, and find a safe flat spot (not touching the carbon post) and tap the round insert out with a hammer.

Do that on both sides. Once you have them out, I like to use fiber grip on the cone surfaces to help keep them from sticking too much. But also helps prevent slipping too.

Cone connection - so it’s two pieces? And tightening the screw causes them to expand into the round hole of the mast? Like a friction fitting.

Yup, two cones (left and right) sandwich the center hole in the post/mast cap.

Popped right out.

I recently purchased a Trek Domane SL7 Di2 Disc from Trek Travel and had the exact same issue when moving my seat to the new bike. Darn thing was nose down and no matter what I tried … no joy. Then I searched online and came across this article and VIOLA!!! YAHTZEE!! … just that easy to nudge the compression cones popped out and I could adjust the saddle tilt!! I’m a happy guy.

and forgot to say thanks!! domo! graze!! gracias!!

What an awful seatpost clamp. I have it. Those things seize all the time. 1 bolt seat posts all suck, but this one is really really bad. This is reason enough to buy the lower end model, so you can replace the post.

The best mechanism I’ve found is Fizik’s. The bolt they use is awful, but once you replace that it’s great - micro adjustable, easy to use. Review: Fizik Cyrano Seatpost | road.cc

I believe the Canyon posts are the same. I thought mine was frozen in place also until I saw someone do it online and “persuaded” it.

I use a bit of fiber paste, that helps prevent slips under bumps, and seems to make it easier to adjust (without locking in the cones as much) when tuning the angle.

looks like those are new on the 2021 Domane, and I see what appears to be two bolts in the seat clamp area. Believe those were on the 2020 Madone.

I created a TrainerRoad account just so I could say THANK YOU to @mcneese.chad ! Your saved my butt today with your clear explanation of how to solve the cone binding issue (plus I just ordered some grip compound–this was also unknown to me). So thank you for teaching me two new things today!

It seems like a terrible design to me. Never had any issue with it on my first generation Boone. Got a new Boone in 2019 and it basically slipped every ride (including CX nats). Right now I’m riding the new Boone with the old seatpost. The two posts look identical, any idea if there was a design change between 2014 and 2019?

I don’t know of anything in particular changing, but something sure could have.

You probably saw me mention it above, but using fiber grip between the cone contact surfaces of the caps and mast can help to prevent slipping.

Yeah for sure. Last time I actually took it to my trek shop and had them do it. So much carbon paste. Seemingly no difference. I gotta get it back in to them.

Dang, that’s disappointing. Sorry for the bad experience.

That clamp requires quite a lot of torque, seemingly too much, if I wasn’t using a torque wrench I’d be thinking “this thing is going to snap” about halfway through. I use white lithium grease between my cap and cups and never had it slip ever. I weigh 175lbs

• Trek Colour-Matched Carbon Seatmast Cap & 7 mm Round Ears

We'll take care of you. Period.

It's our mission to provide you with world-class hospitality every time you visit us online or in-store. We're always here to help you. It's the Trek way.

30 Day Unconditional Guarantee

Ride it and love it, or we'll take it back. If for any reason you're not 100% happy with your trekbikes.com purchase, you can send it back within 30 days for a refund or exchange - no questions asked.

Free shipping on all orders over £40

Simple, free delivery options for however you prefer to shop. Orders over £40 ship to your home for free, and all orders ship free to your local retailer for in-store pickup

More options

• New comments
• Military Photos
• Russian Military
• Anti-Aircraft
• SA-21/S-400 Triumf

• May 8, 2011

Media information

Share this media.

• This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register. By continuing to use this site, you are consenting to our use of cookies. Accept Learn more…